The URL can be used to link to this page

Permits - Permit# SP-2021-00117 - 3746 Sunset Drive - 12/27/2021City of Spring Park Permit 1 CITY OF _ �5P_`�-- I CiPT, RIK, 641I4NIFS0i-A To Schedule an Inspection Call: 952-442-7520 Details Permit Number: SP-2021-00117 Issue Date: 12/27/2021 Zoning Type: COMMERCIAL Use Type: A2 24 HOUR NOTICE REQUIRED FOR ALL INSPECTIONS ♦ MON-FRI: 8AM-4:30PM ♦ NO HOLIDAYS Site Address: 3746 SUNSET DRIVE, SP, MN 55384 Description: REMODEL RESTAURANT/BAR AREA Permit Granted To: Cutting Edge Construction Homeowner's Name: RESTAURANTS NO LIMIT INC Phone Number: Parcel #: 1711723310049 Fees Permit Type: BLDG - Remodel, Gut & Remodel Commercial Permit Exp: 5/17/2022 Valuation: $250,000.00 14609 State Surcharge 11/18/2021 1.00 12/27/2021 Paid Visa: ****--********3469 $125.00 14609 —Permit Fee 11/18/2021 1.00 12/27/2021 Paid Visa:'***-****-****3469 $2,337.00 14609 Plan Review Fee 11/18/2021 1.00 12/27/2021 Paid Visa: ***`--**** ****3469 $1,519.05 Total: $3,981.05 Notes • This permit is issued in accordance with and subject to all provisions of Ordinances and policies governing building and zoning in City of Spring Park. • Permit Holder/Contractor/Owners Agent is responsible to call for the inspections! • Permit Packet, including approved plan, and this inspection record must be posted in an accessible location before calling for inspection. Maintain this inspection record until work is complete. • No deviations from the approved plans are allowed without prior consent from the building inspections department. • To Owner, Occupant, or Contractor: It is ILLEGAL TO OCCUPY this area/building until all required final inspections have been made, approved, signed, and certificate of occupancy issued! Scott Qualle, Building Official City of Spring Park +4349 Warren Avenue ♦ 55384 Copyright ©2021 INSPECTION RECORD 2020 MN State Building Code City of Spring Park Permit Number: SP-2021-00117 Issue Date: 12/27/2021 SITE ADDRESS: 3746 SUNSET DRIVE, SP, MN 55384 Description: PERMIT TYPE: BLDG - Remodel, Gut & Remodel Commercial REMODEL RESTAURANT/BAR AREA ZONE/USE TYPE: COMMERCIAL A2 APPLICANT: Cutting Edge Construction OWNER: RESTAURANTS NO LIMIT INC No inspection will be performed, and a re -inspection fee will be charged, if this "Inspection Record", the "City of Spring Park Permit", and, when applicable, the approved plans are not available to the inspector. This permit expires if construction activity does not commence within 180 days from obtaining this permit; when construction activity has been suspended or abandoned for at least 180 days; or the work has not been inspected within 180 days from the last documented activity. IF SEPARATE PERMITS ARE REQUIRED, REFER TO THE "SEPARATE PERMITS REQUIRED FOR:" STAMP ON YOUR APPROVED PLANS/CONSTRUCTION DOCUMENTS TO IDENTIFY WHAT SEPARATE PERMITS ARE REQUIRED. ALL REQUIRED ROUGH -IN INSPECTIONS, NOTED ON SEPARATE PERMITS, MUST BE COMPLETED PRIOR TO SCHEDULING A FRAMING INSPECTION. ALL REQUIRED FINAL INSPECTIONS, NOTED ON SEPARATE PERMITS, MUST BE COMPLETED PRIOR TO SCHEDULING A BUILDING FINAL INSPECTION. DO NOT COVER ITEMS TO BE INSPECTED. Permit Card Inspection Inspector's Response Approval Date Comments or Corrections Required Framing Required Accessibility Final Final Required Required MUST CALL TO SCHEDULE NO LATER THAN THE BUSINESS DAY PRIOR TO THE INSPECTION DAY: 8:00 A.M. TO 4:30 P.M. MONDAY THRU FRIDAY. PHONE NUMBER TO CALL: 952-"2-7520 When a Certificate of Occupancy is needed, return this card and the approved final inspection notice to the City of Spring Park office. CITY OF SPRING PARK PAGE 1 BUILDING PERMIT 4349 Warren Avenue SP-2021-00117 Spring Park, MN 55384 ❑ Handout Given Phone: 952-471-9051 Fax:952-471-9160 ❑ Lead Handout Given Routed toMNSPECT SITEADDRESS: 35 i� 1j RUC PID:_A--t"iI-T 23 3)_&>►j9 1) Was the home constructed before 1978? (YES ❑, continue with line 2, NOacontinue without completing EPA Section)G.t"pry( Aiilii 2) Will the work disturb ?6 sq ft of interior painted surfaces or >_20 sq ft of exterior painted surfaces? (YES o go to line 4, NO a line 3) 3) Are there any windows being replaced? (YES ❑, go to line 4, NO%s.continue without completing EPA Section) 4) Has this home been Certified Lead Free? (YES o, you MUST Attach Certification Information, NCB; oomplete line 5) 5) EPA Contractor Certification Number NAT - (applies to contractor only) • PROPERTY OWNER: Lk-kNM�&L"t,C Address: 6P4v -- $ c Zyb ' Cit : 6"Aillhil"SCACAJ State: IhIJ Zip; 31 Email: &'S�N�pMc r� Contact Name: '?,lu- baC Phone: ctill-- lQ 3 S a 3etta • CONyTTRA,C�TOR: CAXM►.* Qxy' C,atlt0+C, Address: 13(e. - VCZ 3Zo Ci : Y�`a',r•� StateAtj zip: Phone: 9r.7 Fax: Contractor License No: Contact Name: one:lot?- Email: �'� GU?`iSNG6PIGr[c "5.,�.�. ARCHITECT: Address: Ile' S-1 elk -am Sri - city: 1*14 LI; State: "N Zip: ad LL PhoneFax: • Email��- �. "� .GM Contact Name: h Phone: TYPE OF WORK: 7� New Construction _ Deck Pool o Re -Roof ommercial - Residential 7 Change of Use = Retaining Wall Porch o Re -Side EST. VALUATION OF WORK = Finish Basement Demolition o Fence $ 0' "-'/C2� 4Q1emodel _ Fire Sprinkler o Shed Square feet: . = Addition _ Fire Alarm 0 Window/Door Replacement Garage-Attached/Detach c Plumbing -provide detail on Page 2 # being replaced " Detailed Description of Work: esso Structure Mechanical provide detail on Page 2 g Other �tc • NIDMisc MAI Sgnature of this applicator by the legal property owner or a licensed contraclor. as the owners representative- is required and authorizes the Zoning Administrator or designee and the Building of iciai r a designee to enter upon the property to perform reede specfins o. Entry may be without prior notice. I hereby acknowledge that I have read this application and state that Ohl to the best information all is true and of my knowledge. t further agree th , a work performetl be in accordance with approved plans, specifications and conditions and to abide by of Ordinances of the municipality and the laws of the State of Minnesota regarding ac p rs en pursue • this permA I agree to pay all plan review fees even if I r� • choose not to proceed with the work. Permit expires when work is not commenced within 180 clays from tlate of pe ft. work ntled. abandoned. or rot inspected for 180 days VVork beyond the scope of this permit. or work without a permit or mspection. .9 be subject to a penalty. Noise Ordinance In Effect: - FRIDAY Before 7 a.m. and after 10 p.m. Weekends/Holidays before 7 a.m. and ft, a, p.m. SIGNATURE OF APPLICANT: DATE: 1( JZ Z 1 PRINTED NAME: T A'5-0b�SIA. This is the signature of: = Owner or _ wner's Representative OCCUP. TYPE: A-2 CONST. TYPE:VB CODE: 2020 MBC BLDG SPRINKLED tS2 No VALUATION: $ 250,000.00 Permit Fee: $ 2,337.00 WAC Charge: $ Plan Review Fee: S 1,519.05 Sewer & Water Hook -Up: $ State Surcharge: $ 125.00 Sewer & Water Disconnect: $ Site Inspection Fee: $ Water Meter S S.E.C. Fee: $ Muni SE/WA Fee: S Investigation Fee i Other Fee: $ *2016 SAC Escrow:. 485 >_ Copy Charge ($.25 per 8.5 x11 page) $ Other $ 0 Liconsc Chcck ($5)1 Lead Chcck ($5) $ TOTAL DUE: $ SUB -TOTAL $ 3,981.05 fw Plumbing Fee (from Page 2) $ 'NOTE: Commercial plans will be submitted to the Met Council Environmental Svcs lL v for SAC determination. Escrow payment will be required when permit is issued. If Mechanical Fee (from Page 2) $ after Met Council review no SAC is determined, escrow be LL will refunded in full. Special Conditions/Required Setbacks: O Building Approval By: DATE: 11 /1 7/2021 Printed Building Approval y: Nicole Kastern 0 License Verification ❑ Lead Verification - Checked By: City Approval B . DATE: Paid � Date: I a^ a"1 Receipt No.� �� /78v J i L�,r, _file . s CITY OF SPRING PARK ❑ MECHANICAL PERMIT-- No V-" ►mkt ❑ PLUMBING PERMITW► try. PAGE 2 FOR PERMIT ISSUANCE PAGE 1 and PAGE 2 should be complete MECHANICAL INFORMATION Mechanical Contractor: � � Address: CityState: zip: Phone: Fax: State Bond No: Contact Name. Email: Contact Phone: Detailed Description of Work: �E G i<�Yr INS ND on R.K Indicate type of project, fixtures, and Gas Lines you will be installing or replacing (include count for each type of fixture): MECHANICAL FIXTURES GAS LINES Quantity Quantity Quantity Furnace Kitchen Fan Furnace Air Conditioning System Bath Fan Fireplace Air Exchanger Grill Unit Heater Fireplace Water Heater Unit Heater Grill In Floor Heat Dryer Gas Log Stove Office Use Only: = Replacement (one fixture only, no piping or vent changes) Mechanical Permit Fee: $ Addition/Remodel _ Gas Line Permit Fee: S New Construction _ State Surcharge: S = her _- ----------- ----- Other: $ Total Mechanical Permit: $ PLUMBING INFORMATION Plumbin Contractor: Address - City: State: Zip: Phone: Fax. Plumbers License No: State Bond No: Contact Name: Contact Phone: Email: Detailed Description of Work: ate. -k' �Wsib'L- iVC� r Indicate type of project and fixtures you will be installing or replacing (include count for each type of fixture): PLUMBING FIXTURES Quantity Quantity Quantity Water Heater Shower Laundry Tub = Gas - Electric Dishwasher Rough -In Future Fixture Water Softener Clothes Washer Sump Lawn Sprinkler System Ice Maker Line Water Pipinq System Water Closet (Toilet) Hose Bib Floor Drain Lavatory Wash Basin Bathtub Office Use Only: ❑ Replacement (one fixture only, no piping or vent changes) Plumbing Permit Fee: $ ❑ Addition/Remodel State Surcharge $ ❑ New Construction Other: $ D Other Total Plumbing Permit: $ Payment Confirmation Payer Information: Payment Made By: Payment Made For: Email: Permit Address: Address: Payment Description Payment Date: Peter Anastasia Cutting Edge Construction Company Pete@cuttingedgeconstinc.com 6128101557 PO Box 320 Delano, MN 55328 Permits 12/27/2021 10:53:13 AM Business Name Payment Payment Confirmation Amount Convenience Total Method Account Number Fee City of Spring Park VISA ****3469 84223220 $3,981.05 $117.44 $4,098.49 (Permits) This notice confirms that the above payment was successfully submitted to our payment processor, PSN, and is currently being processed. Thank you for using PSN. NOTE: While credit and debit cards generally are immediately approved, the transaction is not considered "paid" until the credit or debit card company has "settled" the payment which occurs most often within 24 hours. If there are any issues with your payment, PSN will send an email to the address you provided. To check on the progress of your payment, you can log into your profile. Thanks for using PSN. Contact Us PSN Customer Support Submit your question and get a response within one business day. Payment Processing Powered by Payment Service Network (PSN) THIS COMMUNICATION IS INTENDED ONLY FOR THE ADDRESSEE(S) AND MAY CONTAIN INFORMATION THAT IS PRIVILEGED AND CONFIDENTIAL. YOU ARE HEREBY NOTIFIED THAT, IF YOU ARE NOT AN INTENDED RECIPIENT LISTED ABOVE, OR AN AUTHORIZED EMPLOYEE, OR AGENT OF AN ADDRESSEE OF THIS COMMUNICATION RESPONSIBLE FOR DELIVERING E-MAIL MESSAGES TO AN INTENDED RECIPIENT, ANY DISSEMINATION, DISTRIBUTION, OR REPRODUCTION OF THIS COMMUNICATION (INCLUDING ANY ATTACHMENTS HERETO) IS STRICTLY PROHIBITED. IF YOU HAVE RECEIVED THIS COMMUNICATION IN ERROR, PLEASE NOTIFY US IMMEDIATELY BY A REPLY E-MAIL ADDRESSED TO THE SENDER AND PERMANENTLY DELETE THE ORIGINAL E-MAIL COMMUNICATION AND ANY ATTACHMENTS FROM ALL STORAGE DEVICES WITHOUT MAKING OR OTHERWISE RETAINING A COPY. Thank you for your Payment! Transaction ID: 14609 Transaction Number: Transaction Type: Payment Recipient: Contractor Notes: Fees CITY OF S k i\1 C-31�_z �C City of Spring Park 4349 Warren Avenue SP MN,55384 Ph: 952-442-7520 $3,981.05 Date: 12/27/2021 Method: Visa: ****-****-****3469 Address: 3746 SUNSET DRIVE, SP, MN 55384 Reference: Permit Number: SP-2021-00117 Type: BLDG - Remodel, Gut & Remodel Commercial for Cutting Edge Construction Product:e State Surcharge Paid 1.00 $125.00 $125.00 Plan Review Fee Paid 1.00 $1,519.05 $1,519.05 -Permit Fee Paid 1.00 $2,337.00 $2,337.00 Total Amount: $3,981.05 Page 1 of 1 Printed on: 12/27/2021 SPRING PARK On Lake Minnetonka November 17, 2021 Reviewed Plan Dated File Number: Project Name: Design Professional Contractor: 11 /10/2021 SP-2021-00117 Lord Fletcher's Pub Room 2746 Sunset Drive SHEA 10 S. 8th St. Minneapolis, MN 55402 Cutting Edge Construction 136 Bridge Ave W Delano, MN 55328 Scope: Partial remodel of an existing A-2, VB, fully sprinklered building. Renovation is on the second floor, pub room, approximately 800 SF. The plans and specifications, for the project named above, have been reviewed for substantial compliance with the current Minnesota State Building Code. This review is limited to the submitted scope of work; is based upon the supposition that the data, on which the design is based, are correct; and that the necessary legal authority has been obtained to construct the project. Although every attempt has been made to identify code issues or concerns for proper and necessary change, the project designer(s), the building contractor(s) and the property owner(s) are ultimately responsible for providing complete code compliance and maintaining minimum construction standards for the safeguarding of life or limb, health, public welfare and property while constructing this project. Approval is based on the correction of all noted deficiencies and compliance with all items listed below. Any changes from these documents and/or additional information shall be submitted to the Department of Building Safety for code compliance review and approval. Written response of approval must be on site prior to implementation of such changes. Compliance with the stated requirements shall be verified during the construction process. Items to be Addressed and/or Corrected: 1. Minnesota Building Code (MBC) Items: a. Exit signs are required above the egress doors out of the room. (MBC 1013). b. Exit access shall not pass through a room that can be locked to prevent egress. (MBC 1016.2) 2. Minnesota Accessibility Code (MAC) Items: a. Accessible Seating: City of Spring Park 4349 Warren Avenue, Spring Park, MN 55384 Phone: (952) 471-9051 / Fax: (952) 471-9160 / Web: www.ci.spring-park.mn.us Two seats are required to be accessible. 33 occupants x 0.05 = 1.65, which requires 2 seats to be accessible. These must be distributed throughout the room. (MAC 1108.2.9.1) The location of the accessible seat does not appear to be an accessible location. Tables with a center leg often do not meet the minimum toe & knee clearance. Provide specifications for the tables which the accessible seating is located. Section 902: Clear floor space comply with section 305 for a forward approach shall be provided. The tops of dining surfaces shall be 28" minimum and 34" maximum in height above the floor. General Information: Inspections: a. Construction or work shall be inspected in accordance with the requirements of Minnesota Rule 1300.0210. b. It is the responsibility of the contractor/installer to contact the Department of Building Safety, when ready to schedule an inspection, at (952) 442-7520 between the hours of 8:00 a.m. and 4:30 p.m., Monday through Friday. c. The approved permit and all related plans and documentation shall be on site and available to the inspector at the time of inspection. d. Failure to provide the required documentation to the inspector at the time of inspection may result in a cancelation of the inspection and additional inspections fees for the additional inspection(s). e. The field inspector may identify additional code compliance requirements. Any additional identified code compliance requirements shall be completed. 2. Applicable Codes: a. 2020 MN Building Code (MBC) (2018 IBC as amended) b. 2020 MN State Fire Code (MFC) (2018 IFC as amended) c. 2020 MN Accessibility Code (MAC) (2018 IBC Ch.11 & 2009 ICC/ANSI A117.1 as amended) d. 2020 MN Energy Code (MCEC) (2018 IECC as amended) e. 2020 MN Mechanical & Fuel Gas Code (MMC) (2018 IMC & 2018 IFGC, ASHRAE 2016) f. 2020 MN State Electrical Code (MEC) (NFPA 70) g. 2015 MN State Plumbing Code (MPC) (2012 UPC as amended) 3. Separate permits are required for: a. Electrical b. Mechanical c. Plumbing d. Fire Suppression System 4. The site address shall be posted so the address is visible and readable from the fronting street. If you have any questions or concerns regarding this code review, please contact me via telephone at 952-442-7520 or email at codereview@mnspect.com. Regards, Nicole Xaslern, R.A., NCARB Plan Reviewer City of Spring Park 4349 Warren Avenue, Spring Park, MN 55384 Phone: (952) 471-9051 / Fax: (952) 471-9160 / Web: �vww.ci.spring-park.mn.us U MNSPECT, LLC Helping You Comply With The Code 235 First St. W. Waconia, MN 55367 O: 952-442-7520 F: 952-442-7521 www.mnspect.com City of Spring Park 4349 Warren Avenue, Spring Park, MN 55384 Phone: (952) 471-9051 / Fax: (952) 471-9160 / Web: www.ci.spring-park.mn.us Public Health Department Epidemiology and Environmental Health 1011 South First Street, Suite 215 Hopkins, MN 55343-9413 12/20/2021 Pete Anastasia Cutting Edge Construction, Inc PO Box 320 Delano, MN 55328 Epidemiology: (612) 543-5230 Environmental Health: (612) 543-5200 FAX: (952) 351-5222 APPROVED Regarding: The Pub Bar @ Lord Fletcher's, 3746 Sunset Drive, Spring Park, MN 55384 Mr. Anastasia, The submitted plans and specifications appear to be in general conformity with the standards of Hennepin County Ordinance Number 3 and Minnesota Rules, Chapter 4626. These plans are now approved. Scope of the Project: Full remodel of Pub Bar and equipment upgrades in wait staff/expo line. Although this plan has been approved, the following items must be addressed prior to the start of construction. • Please confirm what bartop finish is selected. If wood is chosen, it must be a hardwood such as oak or maple with three coats of poly. Taps must have a non -absorbent surround such as stainless steel or solid surface. The following items are general requirements that will be verified during the final construction inspection. Equipment 1. The following equipment, including types of equipment listed in this part that are custom fabricated, must be certified or classified for sanitation by an American National Standards Institute (ANSI) accredited certification program for food service equipment. (4626.0506) a. Manual warewashing sinks; b. Mechanical warewashing equipment; c. Mechanical refrigeration units except for units or equipment designed and used to maintain food in a frozen state; d. Walk-in freezers; e. Food hot holding equipment; f. Cooking equipment, except for microwave ovens and toasters; g. Ice machines; h. Mechanical slicers; i. Mechanical tenderizers and grinders; and j. Food preparation surfaces including sinks used for food preparation. 2. Examples of ANSI accredited certification programs include NSF, ETL-Sanitation, UL- Sanitation, CSA Sanitation, IAPMO R&T Sanitation or BISSC Sanitation listed equipment that bear one of the following marks: ■■/,wi e.>.t IP SANITATION RgT SANITATION �"°•ryD• �o. NSF/ANSI 3. Food and Beverage Dispensing Equipment shall meet NSF standard #18. (4626.0575(D)2) 4. Ensure that primary food preparation surfaces are smooth such as stainless steel. (4626.0020, Subp.84) 5. Ensure that there is sufficient refrigeration to hold all TCS foods (time temperature control for safety food) at 41 ° F or less. (4626.0675) 6. Provide hot water between 110-130°F to all hand wash sinks in food service areas and toilet rooms. (Hennepin County Ordinance 3) Plumbing 7. Ensure that a licensed plumber installs all plumbing according to the Minnesota Plumbing Code. Submit plumbing plans to the State Plumbing Inspection Program for review and approval prior to installation. 8. A plumbing system must be installed to preclude backflow of a solid, liquid, or gas contaminant into the water supply system at each point of use at the food establishment according to chapter 4714. (4626.1085) 9. A backflow prevention device must be located so that it may be serviced and maintained. (4626.1085B) 10. A direct connection must not exist between the sewage system and a drain originating from equipment in which food, portable equipment or utensils are placed. (4626.1190) 11. Provide an adequate number of floor drains or floor sinks that are easily accessible for cleaning. Floor drains or floor sinks must be located at the front of (but still underneath) equipment or cabinetry for easy access (not midway or at the back). Ideally floor sinks would not be installed in areas under equipment or cabinetry, as they are difficult to clean. Floors must be graded toward the floor drains or floor sinks. (4626.1345) Page 3 12. Hand sinks, preparation sinks, and three -compartment sinks must have a direct connection to sanitary sewer. Refer to the MN Plumbing Code. (4626.1190) Sinks 13. Provide adequate space or a shield between a hand sink or a dump sink and an adjacent preparation table, shelving etc. to preclude contamination by splash. (4626.0300)(4626.0315) 14. Provide a sign directing employees to wash hands, hand cleanser, and single -use towels at all hand wash sinks located in food service, food preparation, and ware washing areas. (4626.1457) 15. Employee hand washing sinks must be conveniently located in all food preparation, food dispensing and utensil washing areas. (4626.1095) Installations 16. Seal all annular openings around pipes and other conduits that pass through the walls or floor. (4626.0725) 17. All piping must be concealed above the ceiling, below the floor and in the walls. Expose the piping in the space only where necessary to connect to equipment and fixtures. (4626.1340) 18. All junctures between the wall surface and the edges of attached equipment must be sealed with approved caulk/sealing compound (e.g. three -compartment sink, hand sink, etc.). (4626.0725) 19. If conduit pipes are provided for the beverage lines, they must extend at least three inches above the finished floor elevation at both ends and the annular opening between the beverage lines and the conduit pipe sealed with a hard material and provided with a cleanable finish. (4626.0725) 20. All millwork cabinets, must be mounted on legs so there is a six-inch clearance from the bottom of the cabinet to the floor or sealed to a solid masonry base. Enclosed, unfilled bases are not permitted. (4626.0730) (4626.0545) 21. Small under counter dishwashers must be installed on skids or casters for ease in movement for cleaning. (4626.0730) 22. All floor mounted equipment must be: sealed in place and properly spaced to allow for cleaning; mounted on legs so there is a 6 inch clearance from the bottom of the equipment to the floor; or mounted on casters (and installed with flexible utility connections) to permit removal for cleaning. (4626.0730) 23. All countertop equipment must be easily moveable, on 4-inch legs, or sealed in place as to be easily cleanable. (4626.0725) Room Finishes 24. The walls and ceilings in the food preparation, utensil washing, within 3 feet of a janitorial sink and toilet room areas must be smooth, durable, non -absorbent, and easily cleanable such as stainless steel, ceramic tile, or fiberglass reinforced panels (FRP). In areas Page 4 where paint is permitted (i.e. ceilings and soffits), the finish shall be smooth, durable, and easily cleanable (e.g. high gloss enamel). (4626.1325) 25. The floor material in food preparation areas, walk in refrigerators, warewashing areas, and toilet rooms, all servicing areas, and areas subject to flushing or spray cleaning methods shall be of a nonabsorbent, smooth, durable and easily cleanable material. (4626.1325) (4626.1345) co"wl wT11"D .' 04:aiutatrniwu 26. Floors and wall junctures shall be coved and closed to no larger than 1/32 inch (1 millimeter). (4626.1345) 27. Tile shall be installed with an epoxy or other water-resistant grout. (4626.1325) 28. The grout on wall tile must have a penetrating sealer applied. (4626.1325) 29. The floor in and about three foot peripheral area of the salad bar, buffet table, or bar must be smooth, easily cleanable, and non -absorbent. Carpeting does not meet these criteria and is unacceptable. Provide a transition strip between different floor coverings (example: quarry the to carpet). (4626.1350) 30. Perforated or fissured drop lay -in ceiling panels are not acceptable. Provide durable, washable ceiling panels, such as vinyl -clad panels. (4626.1325) Protection of Food and Equipment 31. If bar glasses are hung above the customer counter, approved shielding is required to protect the glassware. (4626.0955) Lighting 32. Install a sufficient number of light fixtures: • A minimum of 50-foot candles of light at a surface where an employee is working with food or working with utensils or equipment such as knives, slicers, grinders, or saws where employee safety is a factor. (4626.1470) • A minimum of 20 foot candles of light at a surface provided for consumer self- service, such as buffets and salad bars, or where fresh produce or packaged foods are sold or offered for consumption; 20 foot candles of light 30 inches off the floor in areas used for handwashing, warewashing, equipment, utensil and dry food storage, walk in coolers and in toilet rooms. (4626.1470)(Hennepin County Ordinance 3) 33. Providing shielded, under bar lighting over bar sinks and ice bins is advised to achieve 50 foot candles in these areas. Page 5 34. Lights over exposed food storage, food preparation, food display facilities, and utensil cleaning and storage areas must be shielded or shatter -resistant. (4626.1375) Please note that all plans and equipment must be designed, installed and maintained according to: • Minnesota Rule, Chapter 4626(https://www.revisor.mn.gov/rules/?id=4626) and • Hennepin County Ordinance 3 (http://www.hennepin.us/your-government/ordinances/ordinance-30). For additional information about plan review requirements or questions, please contact me or review Hennepin County Construction guidelines, found here: http://www.hennepin.us/planreview. Minnesota Clean Indoor Air Act (MCIAA) Freedom to Breathe and Hennepin County Ordinance 24 35. A sign must be posted at all public entrances to the facility stating: "No Smoking." Note- Smoking definition includes the use of electronic cigarettes. http://www.hennepin.us/your-government/ordinances/ordinance-24 36. Obtain all necessary state and local permits. 37. Please notify me at 612-578-1388, prior to completion so a construction inspection may be scheduled. 38. An application for a food license from Hennepin County along with invoices for the remainder of the plan review fees and the 2021 license will arrive shortly. The completed application and the invoices must be submitted and paid prior to scheduling a final inspection. 39. This facility may not be constructed, remodeled or converted except in accordance with the plans and specifications as they are now approved by this Department. Please contact me for any proposed changes or additions. 40. This facility is approved to serve the menu items and volume submitted with this plan (attached) or similar. If menu, volume or scope of service changes, approval must be obtained from this department prior to change. 41. The remodeled portion of this retail food facility cannot open for business until it has been inspected and approved. This plan is approved for one year from the date of this letter. A COPY OF THIS LETTER MUST ALWAYS BE ON THE JOB SITE AND BE READILY ACCESSIBLE TO THE GENERAL CONTRACTOR. Please submit any changes to the plan and all additional required information as soon as possible. If you have any questions, feel free to call me at 612-543-5218. Page 6 Thank you for your consideration and cooperation in addressing the items outlined in this letter. I shall remain available for consultation and review of your facility's construction progress. Sincerely, Allison Rude Senior Environmentalist cc: Julia Selleys, Supervising Environmentalist Leah Larson, Environmentalist Tom Emer, Tomsec, Inc (owner) Spring Park City Clerk c/o MNSPECT Boeller, Specifications 1110712021 Project From Lord Fletchers - Upstairs bar - Boelter LLC Spring Park MN Rick Palm Spring Park, MN 7120 Northland Terrace N Minneapolis, MN 55428 (262)523-6200 763.450.2924 (Contact) ITEM 1- PASS-THRU COCKTAIL STATION (1 REQ'D) Glastender, Inc. Model CS-42X32-CCW Dimensions: 45(h) x 42(w) x 32(d) Assembly Ice Bin/Cocktail Station, pass-thru combo, 42"W x 32"D, counterclockwise configuration, pass-thru ice bin, tubing chase, (2) wet waste sinks with (1) gooseneck faucet (low lead compliant) & strainers, blender shelf, double speed rail, 15"D stainless steel draining shelf with removable perforated inserts, laminated wooden front & end panels, ETL-Sanitation 1 ea 1 year parts & labor warranty 1 ea Model CPS-42X32 Stainless Steel Side Panels, in lieu of standard laminated, includes foamed -in -place front & end panels, for 42" x 32" units 1 ea Aerator, faucet, 2.0 GPM, standard 1 ea Model 02001103 Ten -circuit cold plate, for 32" deep cocktail stations 1 ea Model 03000509 Sneeze Guard, 30"W, for 32"D pass-thru cocktail station 1 ea Model DOS/SS-42 Double Overshelf, 42"W x 15"D x 27"H, removable perforated inserts, includes mounting brackets, 20 gauge stainless steel construction, for pass-thru cocktail stations, ETL-Sanitation 1 ea Surcharge GAS SIZE MBTU KW CONN 1I C WATER ELECTRICAL STEAM INLET SIZE I RETURN SIZE HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE 1 3/8" 3/8" 2 3 PLUMBING 1 REMARKS ice bin drain PLUMBING 2 REMARKS sink drains PSIG (MIN) I PSIG (MAX) WASTE INDIRECT DIRECT SIZE SIZE 1 1-1/2" 2 (2) 1-1/2" 3 1/2" Page 1 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring a ITEM 2 - BOTTLE STORAGE UNIT (1 REQ'D) Glastender, Inc. Model LDA-24D Dimensions: 37(h) x 24(w) x 29(d)' Underbar Liquor Steps, free standing, 24"W x 29"D (aligns with 19" deep units with double speed rail), (5) steps, extra -wide rear step, includes clear lift-off liquor -identification cover, stainless steel construction, stainless steel legs with adjustable bullet feet, ETL-Sanitation 1 ea 1 year parts & labor warranty 1 ea Surcharge GAS SIZE MBTU KW CONN 1 C I:11110ou][Ile\I STEAM INLETSIZE I RETURN SIZE I LB/HR WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE PSIG (MIN) C WASTE INDIRECT SIZE DIRECT SIZE ITEM 3 - DRAINBOARD (1 REQ'D) Glastender, Inc. Model DBA-48 Dimensions: 37(h) x 48(w) x 19(d) Underbar Drainboard, free standing, 48"W x 19"D, drain pan with removable perforated insert, stainless steel construction, stainless steel legs with adjustable stainless steel bullet feet, ETL-Sanitation 1 ea 1 year parts & labor warranty 1 ea Model DSR-48 Double Speed Rail, 48"W, open step -and -rail design, ABS sound -deadening covers, clear snap -on liquor identification label cover, field installed, stainless steel construction, ETL-Sanitation 1 ea Surcharge ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 GAS STEAM SIZE MBTU KW CONN I INLETSIZE I RETURN SIZE I LB/HR I PSIG (MIN) 777) 1 1 C WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE C WASTE INDIRECT DIRECT SIZE SIZE 1-1/2" Page 2 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring ITEM 4 - WASTE CABINET (1 REQ'D) _ Glastender, Inc. Model SWB-12 Dimensions: 12(w) x 24(d) Underbar Wet Waste Sink Unit, 12"W x 24"D, 9-1/4" wide x 11-1/2" front -to -back x 6" deep bowl, deck mount gooseneck faucet (low lead compliant), lift -out plastic perforated sink strainer, stainless steel construction, legs with adjustable bullet feet, ETL-Sanitation, NSF/ANSI 61, Annex G 1 ea 1 year parts & labor warranty 1 ea Aerator, faucet, 2.0 GPM, standard 1 ea Surcharge 9% ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 GAS SIZE MBTU KW CONN 1 C STEAM INLET SIZE I RETURN SIZE I LB/HR I PSIG WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE 3/8" 3/8" ITEM 5 - TRASH CAN (BY OWNER) Trash Can (by owner) ELECTRICAL C WASTE INDIRECT DIRECT SIZE SIZE GAS STEAM SIZE MBTU KW CONN I INLET SIZE I RETURN SIZE LB/HR I PSIG (MIN) LPSIG (MAX) 1 1 WATER WASTE HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE 1 1 ITEM 6 - SPARE NO. Page 3of18 1110712021 Lord Fletchers - Upstairs bar - Spring ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 GAS STEAM SIZE MBTU KW CONN I INLET SIZE I RETURN SIZE I LB/HR I PSIG (MIN) PSIG (MAX) 1I I1 C WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE ITEM 7 - GLASSWASHER, UNDERCOUNTER / UNDERBAR (1 REQ'D) Glastender, Inc. Model GT-24-CW-208 Dimensions: 38.5(h) x 24.13(w) x 24.13(d) C WASTE INDIRECT SIZE DIRECT SIZE Glasswasher, rotary type, 24-1/8"W, low temperature chemical sanitizing, clockwise rotation, washes (1000) 2-1/2" diameter glasses per hour, 10" maximum glass height, automatic chemical pumps, digital temperature gauges, prime switch, automatic chemical sensor, low-water cutoff, removable stainless steel wire conveyor, includes (3) curtains, removable top, front, & side panels, stainless steel construction, stainless steel legs with adjustable feet, 4.0 kW heater, 1/6 HP water pump, cETLus, ETL-Sanitation 1 ea 120/208v/60/1-ph, std ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 4.0 1/6 2 120/208 60 1 Direct GAS SIZE MBTU KW CONN 1 WATER 1 PLUMBING 1 REMARKS 150' maximum temperature; 130T minimum temperature STEAM INLET SIZE I RETURN SIZE I LB/HR 1/2" 1/2" C PSIG (MIN) I PSIG (MAX) WASTE INDIRECT DIRECT SIZE SIZE 1-1/2" ITEM 8 - HAND SINK (1 REQ'D) 1.,. Glastender, Inc. Model DHSB-12 Dimensions: 12(w) x 24(d) tea„ Deluxe Underbar Hand Sink Unit, free standing, 12"W x 24"D, 9-1/4" wide x 11-1/2" front -to -back x 6" deep bowl, deck mount faucet (low lead compliant), soap dispenser, hinged front door conceals towel dispenser, stainless steel construction, legs with adjustable bullet feet, ETL-Sanitation, NSF/ANSI 61, Annex G 1 ea 1 year parts & labor warranty 1 ea Model LSB-D Splash, left end, 24" deep 1 ea Model RSB-D Splash, right end, 24" deep 1 ea Aerator, faucet, 2.0 GPM, standard 1 ea Faucet, deck mounted, 4"OC, 3/8" hot & cold water connections required, standard 1 ea Surcharge Page 4 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring ELECTRICAL VOLTS CYCLE I PHASE I CONN AFF NEMA AMPS KW 1 GAS STEAM SIZE MBTU KW CONN I INLET SIZE I RETURN SIZE I LB/HR 1 1 WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE 1 2 3/8" 1 " PLUMBING 2 REMARKS Sink faucet ITEM 9 - DRAINBOARD (1 REQ'D) Glastender, Inc. Model DBA-30 Dimensions: 37(h) x 30(w) x 19(d) PSIG (MIN) I PSIG (MAX) WASTE INDIRECT DIRECT SIZE SIZE 1 1-1/2" 2 Underbar Drainboard, free standing, 30"W x 19"D, drain pan with removable perforated insert, stainless steel construction, stainless steel legs with adjustable stainless steel bullet feet, ETL-Sanitation 1 ea 1 year parts & labor warranty 1 ea Model DSR-30 Double Speed Rail, 30"W, open step -and -rail design, ABS sound -deadening covers, clear snap -on liquor identification label cover, field installed, stainless steel construction, ETL-Sanitation 1 ea Surcharge GAS SIZE I MBTU I KW CONN 1 WATER ELECTRICAL STEAM INLET SIZE I RETURN SIZE I LB/HR HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE ITEM 10 - ICE BIN (1 REQ'D) Glastender, Inc. Model IBA-30-CP10 Dimensions: 37(h) x 30(w) x 19(d) PSIG (MIN) I PSIG (MAX) WASTE INDIRECT DIRECT SIZE SIZE 1-1/2" Underbar Ice Bin, with 10-circuit cold plate, 30"W x 19"D, 84 lbs. ice capacity, 10-1/2" deep bin liner, ABS plastic breaker strip around ice bin liner, includes sliding stainless steel bin cover, stainless steel construction, stainless steel legs with adjustable stainless steel bullet feet, ETL-Sanitation 1 ea 1 year parts & labor warranty 1 ea Model DSR-30 Double Speed Rail, 30"W, open step -and -rail design, ABS sound -deadening covers, clear snap -on liquor identification label cover, field installed, stainless steel construction, ETL-Sanitation 1 ea Model SHA-4 Underbar Soda Gun Holder, 4"W x 19"D x 21"H, built-in holder for soda gun, includes integral drip pan, removable cover for access to soda gun manifold (soda gun not included), must mount to at least one other piece of underbar equipment (no provision for Page 5 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring leg mounting), stainless steel construction, ETL-Sanitation 1 ea Surcharge ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 GAS SIZE MBTU KW CONN 1 1 WATER STEAM INLET SIZE I RETURN SIZE I LB/HR I PSIG (MIN) PSIG (MAX) HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE F ITEM 11- SODA GUN (BY OTHERS) Soda Gun (by others) ELECTRICAL WASTE INDIRECT DIRECT SIZE SIZE 1 3/4" 2 1/2" VOLTS CYCLE I PHASE I CONN AFF NEMA AMPS KW HP MCA MOCP 1 GAS STEAM SIZE MBTU KW CONN I INLET SIZE I RETURN SIZE I LB/HR I PSIG (MIN) PSIG (MAX) 1 1 WATER WASTE HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE 1 1 ITEM 12 - SPARE NO. ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 Page 6 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring GAS STEAM SIZE MBTU KW CONN I INLET SIZE I RETURN SIZE I LB, 1 1 WATER R I PSIG (MIN) I PSIG (MAX) HOT I SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE WASTE INDIRECT SIZE DIRECT SIZE ITEM 13 - CORNER ANGLE FILLER (1 REQ'D) Glastender, Inc. Model IFC-24/30R Underbar Full Corner Drainboard, dimensional, 90' angle, 24" deep, with backsplash, 24" left & 30" right, stainless steel construction, no legs (mounts between two adjacent underbar pieces), ETL-Sanitation 1 ea 1 year parts & labor warranty 1 ea Surcharge ELECTRICAL GAS STEAM SIZE MBTU KW CONN I INLETSIZE I RETURNSIZE I LB/HR 1 1 WATER C HOT SIZE HOT AFF HOT GPH COLD SIZE COLD iFILTERED AFF SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE PSIG (MIN) I PSIG (MAX) C WASTE INDIRECT DIRECT SIZE SIZE 1-1/2" ITEM 14 - BOTTLE STORAGE UNIT (1 REQ'D) Glastender, Inc. Model LDA-24S Dimensions: 37(h) x 24(w) x 24(d) = Underbar Liquor Steps, free standing, 24"W x 24"D (aligns with 19" deep units with single speed rail), (4) steps, extra -wide rear step, includes clear lift-off liquor -identification cover, stainless steel construction, } stainless steel legs with adjustable bullet feet, ETL-Sanitation U i 1 ea 1 year parts & labor warranty 1 ea Surcharge ELECTRICAL GAS STEAM SIZE MBTU KW CONN I INLET SIZE I RETURN SIZE I LB/HR 1 1 WATER C HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE PSIG (MIN) I PSIG (MAX) C WASTE INDIRECT SIZE DIRECT SIZE Page 7 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring ITEM 15 - DRAINBOARD (1 REQ'D) 4 Glastender, Inc. Model DBA-42 Dimensions: 37(h) x 42(w) x 19(d) Underbar Drainboard, free standing, 42"W x 19"D, drain pan with removable perforated insert, stainless steel construction, stainless steel legs with adjustable stainless steel bullet feet, ETL-Sanitation 1 ea 1 year parts & labor warranty 1 ea Model SSR-18 Single Speed Rail, 18"W, open step -and -rail design, ABS sound -deadening covers, clear snap -on liquor identification label cover, field installed, stainless steel construction, ETL-Sanitation 1 ea 1 year parts & labor warranty 1 ea Surcharge ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 GAS STEAM SIZE MBTU KW CONN I INLETSIZE I RETURN SIZE I LB/HR I PSIG (MIN) PSIG (MAX) 1 1 WATER WASTE HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE 1-1/2" SIZE 1 1 ITEM 16 - SODA SYSTEM (BY OTHERS) Soda lines, soda guns, install of lines, chases, etc (all by others) ELECTRICAL GAS STEAM SIZE MBTU KW CONN I INLETSIZE I RETURN SIZE I LB/HR 1 1 WATER C HOT SIZE I HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE PSIG (MIN) I PSIG (MAX) C WASTE INDIRECT SIZE DIRECT SIZE Page 8 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring ITEM 17 - POS (BY OTHERS) POS (by others) GAS SIZE MBTU KW CONN 1 C ELECTRICAL STEAM INLETSIZE I RETURNSIZE I LB/HR WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE PSIG (MIN) PSIG (Mi WASTE INDIRECT DIRECT SIZE SIZE 1 ITEM 18 - BACK BAR CABINET, REFRIGERATED (1 REQ'D) Glastender, Inc. Model C1FB84 Dimensions: 35(h) x 84(w) x 25.25(d) Cooler, one zone, front serviced, bar profile, 84"W, three -section, 20"W door opening, self-contained F refrigeration, LED interior lighting, front venting, stainless steel interior, R290 Hydrocarbon refrigerant, 1/4 HP, NSF Standard 7 for open food storage, cETLus, ETL-Sanitation, ETL Verified 1 ea The C1FB84 can hold (4) standard size kegs or up to (14) 1/6 kegs. A 5# CO2 bottle (05000636) with tank mount regulator (REG-0O2-HP) will NOT fit with (14) 1/6 kegs. See draft system accessories. 1 ea 1 year parts & labor warranty, 5 year compressor warranty (NOTE: applies to units sold and installed within the US & Canada) 1 ea 120v/60/1-ph, 7.0 amps, NEMA 5-15P, standard 1 ea Standard 34° to 40°F operation 1 ea (L) Refrigeration compartment on left side 1 ea Refrigeration compartment cover finish: Laminated 1 ea Door style, first: Laminated 1 ea Door hinge location, first: Left 1 ea Shelving style, first: (3) adjustable shelves, standard 1 ea Door handle, first: Polished stainless steel, standard 1 ea Door style, second: Laminated 1 ea Door hinge location, second: Right 1 ea Shelving style, second: (3) adjustable shelves, standard 1 ea Door handle, second: Polished stainless steel, standard 1 ea Door style, third: Laminated 1 ea Door hinge location, third: Right 1 ea Shelving style, third: (3) adjustable shelves, standard 1 ea Door handle, third: Polished stainless steel, standard 1 ea No finished top - stainless steel sub -top, standard 1 ea Back finish: Galvanized steel, standard 1 ea Left side finish: Black vinyl -clad, standard 1 ea Right side finish: Black vinyl -clad, standard 1 ea Bright White (7,000k), standard 1 ea 6" legs, stainless steel bullet feet 1 ea Surcharge Page 9 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring **ALL LAMINATE TO BE WILSONART MONTANA WALNUT** ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 1/4 2 120 60 1 Cord& 5-15P 7 15.0 g GAS SIZE MBTU KW CONN 1 C STEAM INLET SIZE I RETURN SIZE I LB/HR WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE PSIG (MIN) PSIG (M) WASTE INDIRECT DIRECT SIZE SIZE 1 ITEM 19 - BACK BAR CABINET, REFRIGERATED (1 REQ'D) Glastender, Inc. Model ClFBI08 Dimensions: 35(h) x 1O8(w) x 25.25(d) Cooler, one zone, front serviced, bar profile, 108"W, four -section, 20"W door opening, self-contained refrigeration, LED interior lighting, front venting, stainless steel interior, R290 Hydrocarbon refrigerant, 1/4 HP, NSF Standard 7 for open food storage, cETLus, ETL-Sanitation, ETL Verified 1 ea The C1FB108 can hold (5) standard size kegs or up to (18) 1/6 kegs. A 5# CO2 bottle (05000636) with tank mount regulator (REG-CO2-HP) will fit with (18) 1/6 kegs. See draft system accessories. 1 ea 1 year parts & labor warranty, 5 year compressor warranty (NOTE: applies to units sold and installed within the US & Canada) 1 ea 120v/60/1-ph, 7.0 amps, NEMA 5-15P, standard 1 ea Standard 34° to 40°F operation 1 ea (R) Refrigeration compartment on right side 1 ea Refrigeration compartment cover finish: Laminated 1 ea Specify laminate number when ordering 1 ea Door style, first: Laminated 1 ea Specify laminate number when ordering 1 ea Door hinge location, first: Left 1 ea Model DC -KC Factory door conversion to keg dispensing (DEDUCT), stainless steel keg rack replaces shelves, see spec sheet for keg capacities (NOTE: Standard size kegs require a minimum 17"W door opening) 1 ea Door handle, first: Polished stainless steel, standard 1 ea Door style, second: Laminated 1 ea Specify laminate number when ordering 1 ea Door hinge location, second: Left 1 ea Model DC -KC Factory door conversion to keg dispensing (DEDUCT), stainless steel keg rack replaces shelves, see spec sheet for keg capacities (NOTE: Standard size kegs require a minimum 17"W door opening) 1 ea Door handle, second: Polished stainless steel, standard 1 ea Door style, third: Laminated 1 ea Specify laminate number when ordering 1 ea Door hinge location, third: Right 1 ea Shelving style, third: (3) adjustable shelves, standard 1 ea Door handle, third: Polished stainless steel, standard Page 10 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring 1 ea Door style, fourth: Laminated 1 ea Specify laminate number when ordering 1 ea Door hinge location, fourth: Right 1 ea Shelving style, fourth: (3) adjustable shelves, standard 1 ea Door handle, fourth: Polished stainless steel, standard 1 ea No finished top - stainless steel sub -top, standard 1 ea Back finish: Galvanized steel, standard 1 ea Left side finish: Black vinyl -clad, standard 1 ea Right side finish: Black vinyl -clad, standard 1 ea Bright White (7,000k), standard 1 ea 6" legs, stainless steel bullet feet 1 ea Model BT-4-SS Tee Draft Dispensing Tower, countertop, (4) stainless steel faucets (handles not included), air-cooled, (1) 5"W insulated column, integral drain pan with removable perforated insert, all stainless steel construction, stainless steel finish, ETL-Sanitation 1 kt Model TCK34-1 Tower Cooling Kit, for 3 or 4-door cooler with one column (NOTE: Required to keep faucets cold when dispensing draft beer) 1 kt Model PRK-TC Tank mount CO2 Primary Regulator Kit 1 kt Model REG-0O2-LP1 Secondary Regulator Kit, (1) product 1 kt Model MAN4 Four Product Manifold Kit (includes: 6 feet of red air line per product & the fittings required for connection to keg) 4 ea Model 05001066 Sanke Keg Tap, stainless probe 1 ea Surcharge **ALL LAMINATE TO BE WILSONART MONTANA WALNUT** ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 1/4 CPrug 2 120 60 1 5-15P 7 15.0 GAS SIZE Mum KW CONN 1 C STEAM INLET SIZE I RETURN SIZE I LB/HR WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE PSIG (MIN) PSIG (MI WASTE INDIRECT DIRECT SIZE SIZE 1 1/2" ITEM 20 - REACH -IN UNDERCOUNTER FREEZER (1 REQ'D) True Mfg. - General Foodservice Model TUC-24F-HC Dimensions: 31.63(h) x 24(w) x 24.75(d) Undercounter Freezer, -10°F, (1) stainless steel door, (2) PVC coated adjustable wire shelves, stainless steel top, front & sides, clear coated aluminum interior with stainless steel floor, (4) recessed castors, front breathing, R290 Hydrocarbon refrigerant, 1/4 HP, 115v/60/1-ph, 2.3 amps, NEMA 5-15P, cULus, UL EPH Classified, CE, Made in USA 1 ea NOTE: Effective 7/1/21, all True pricing is tentative based on final production date of units ordered. Any units ordered that will be produced on or after January 1, 2022 will be subject to the new January 1, 2022 List Prices (+12%). True will confirm price at time of order. For more information, please contact your True representative. 1 ea Right Hand, Standard: Unit comes with field reversable hinges and is built with hinging on right side of unit. 1 ea Self-contained refrigeration standard n Page 11 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring 1 ea Warranty - 7 year compressor (self-contained only), please visit www.Truemfg.com for specifics 1 ea Warranty - 3 year parts and labor, please visit www.Truemfg.com for specifics 1 ea NOTE: Four (4) stationary castors. 31-5/8" (804 mm) work surface height. Two (2) front leg levelers included with unit for alternate use. No other castor/leg options are available for this model. ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 115 60 1 Cord 5-15P 2.3 1/4 g& GAS SIZE MBTU KW CONN 1 C STEAM INLETSIZE I RETURNSIZE I LB/HR WATER HOT SIZE I HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE C zd1C2t&dL`. WASTE INDIRECT SIZE DIRECT SIZE ITEM 21- REACH -IN REFRIGERATOR (1 REQ'D)=--- —------ __ Hoshizaki Model R2A-FG Dimensions: 79.5(h) x 55(w) x 34.5(d) Steelheart Series Refrigerator, reach -in, two -section, 50.37 cu. ft., top mounted self-contained refrigeration, (6) epoxy coated wire shelves, (2) full height hinged glass doors, digital temperature display/controls, LED _a interior lighting, stainless steel exterior front & sides, stainless steel interior, (4) 4" heavy duty casters (2IL with brakes), R290 Hydrocarbon refrigerant, 1/2 HP, NEMA 5-15P, cETLus, ETL-Sanitation s .. 1 ea Warranty: 3-Year parts & labor on entire machine 1 ea Warranty: 5-Year parts on compressor 1 ea 115v/60/1-ph, 8 amps, standard 4 pk Model HS-5052 Shelf, 21-1/4" x 26", epoxy coated wire, (1) pack, for 1, 2 or 3-section reach - in refrigerated units 1 st Casters, 4" (set of 4), standard ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 Cord& 5-15P 1/2 g 2 115 60 1 8 GAS SIZE MBTU KW CONN 1 C STEAM INLET SIZE I RETURN SIZE I LB/HR WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE PSIG (MIN) I PSIG (M) WASTE INDIRECT DIRECT SIZE SIZE 1 Page 12 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring ITEM 30 - SERVER COUNTER (1 REQ'D) Custom Model SERVER COUNTER Stainless server counter, 12' x 32", 10" x 14" x 10" sink, 20" x 20" x 2" glass fill rack shallow sink, opening for drawer warmer, under shelf where possible, cut out for drop in soup well, 4" backsplash, open leg design, NSF 1 ea T&S Brass Model B-1110 Faucet, 6" swing nozzle, deck mounted, quarter -turn Eterna cartridges, lever handles, low lead, ADA Compliant 1 ea T&S Brass Model B-0113-CR-BVB-A Glass Filler, vertical single -deck mount, 2.2 GPM aerator valve (B-0107-A), 44" flexible stainless steel hose, 24" riser, 18" flexible supply lines, 6" wall bracket, quarter -turn Cerama cartridges, low lead, (Product Not Designed/Intended for Commercial Warewashing in North America) GAS SIZE MBTU KW CONN 1 WATER ELECTRICAL STEAM INLET SIZE I RETURN SIZE HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE 1 1/2" 1/2" 2 1/2" 1/2" PSIG (MIN) I PSIG (MAX) WASTE INDIRECT DIRECT SIZE SIZE 1 2 ITEM 31- MEGA TOP SANDWICH / SALAD PREPARATION REFRIGERATOR (1 REQ'D) Hoshizaki Model SR60A-24MD2 Dimensions: 44.25(h) x 60(w) x 37.3(d) Steelheart Series Mega Top Refrigerator, two -section, 60"W, 17.55 cu. ft., self-contained rear mounted refrigeration system, (1) solid hinged door, (1) adjustable shelf, (2) drawers, provided with (24) 1/6 top pans 4" deep, 6" maximum pan depth (top rail), 10"D x 1/2" thick white polyethylene cutting board & a full set of adapter bars, stainless steel interior, stainless steel exterior front, sides & hinged top cover, (4) 6" casters (2 with brakes), R290 Hydrocarbon refrigerant, 1/3 HP, NEMA 5-15P, cETLus, ETL-Sanitation (Made to order: allow 4-6 week lead time) 1 ea Warranty: 3-Year parts & labor on entire machine 1 ea Warranty: 5-Year parts on compressor 1 ea 115v/60/1-ph, 6.0 amps, standard ELECTRICAL VOLTS I CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 C 5-15P 1/3 Plug 2 115 60 1 6 GAS SIZE MBTU KW CONN 1 C 610TA�&I INLETSIZE I RETURNSIZE I LB/HR WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE PSIG (MIN) I PSIG (MAX) C WASTE INDIRECT SIZE DIRECT SIZE Page 13 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring ITEM 32 - WARMING DRAWER, FREE STANDING (1 REQ'D) Wells Model RWN-2 Dimensions: 25(h) x 20.25(w) x 26.31(d) Warming Drawer Unit, freestanding, narrow, two drawers, capacity approximately 8 dozen rolls/drawer,-1 humidity and thermostat controls, stainless steel construction, cULus 1 ea 1 year parts & labor warranty, standard 1 ea Note: Must specify voltage and phase 1 ea 120v/60/1-ph, 900 watts, 7.5 amps, NEMA 5-15P ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP Cord& 1 120 60 1 5-15P 7.5 0.9 g GAS SIZE MBTU KW CONN 1 C STEAM INLETSIZE I RETURNSIZE I LB/HR WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE ITEM 33 - COFFEE MAKER (BY OTHERS) Coffee Maker (by others) PSIG WASTE INDIRECT DIRECT SIZE SIZE 1 ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 GAS SIZE MBTU KW CONN 1 C STEAM INLET SIZE I RETURN SIZE I LB/HR WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE ITEM 34 - GLASS DOOR COOLER (EXISTING) Glass Door Cooler (existing) PSIG (MIN) PSIG (M/ WASTE INDIRECT DIRECT SIZE SIZE Page 14 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring ELECTRICAL GAS STEAM SIZE MBTU I KW CONN I INLET SIZE I RETURN SIZE LB/HR 1 1 WATER C HOT SIZE I HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE ITEM 35 - WALL SHELVING (1 REQ'D) Custom Model WALL SHELVING Wall Shelving (allowance) GAS SIZE MBTU KW CONN 1 C ELECTRICAL STEAM INLET SIZE I RETURN SIZE I LB/HR WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE PSIG (MIN) I PSIG (MAX) Li - WASTE INDIRECT SIZE DIRECT SIZE PSIG (MIN) I PSIG (MAX) WASTE INDIRECT DIRECT SIZE SIZE 1 ITEM 36 - INDUCTION RETHERMALIZER (1 REQ'D) Vollrath Model 74110110 Dimensions: 13.5(h) x 13.88(d) Mirage® Induction Soup Rethermalizer, 11 quart, dry use, temperature control in °F or °C, (4) soup presets, stir indicator LED, solid state controls with locking function, includes: induction ready inset & inset cover, natural & black finish, 800W, 6.7 amps, cord with NEMA 5-15P, 120v/50/60/1-ph, cLILus, NSF, FCC, imported (cover not NSF) 2 ea Model 88204 Inset, 11 quart, induction ready, for Mirage induction rethermalizer, NSF ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP F120 50/60 1 Co 11,5-15P 6.7 .8 Page 15 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring GAS STEAM SIZE MBTU KW CONN I INLETSIZE I RETURNSIZE I LB/HR 1 1 WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE ITEM 500 - FREIGHT (1 REQ'D) FREIGHT Freight from Manufacturer and Delivery to Site C PSIG (MIN) I PSIG (MAX) WASTE INDIRECT SIZE DIRECT SIZE ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 GAS STEAM 1 SIZE MBTU KW CONN I 1 I INLET SIZE I RETURN SIZE I LB/HR PSIG (MIN) PS WATER WASTE C HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE C INDIRECT SIZE DIRECT SIZE ITEM 502 - INSTALL (1 REQ'D) BOELTER PREMIER Model INSTALL Install, SET IN PLACE, silicone, level, assemble equipment, final mechanical hook ups by plumber and electrician. ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 GAS STEAM SIZE MBTU KW CONN I INLET SIZE I RETURN SIZE I LB/HR I PSIG (MIN) PSIG (MAX) 1 1 WATER WASTE HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE 1 1 Page 16 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring ITEM 503 - DESIGN WORK (1 REQ'D) Custom Model DESIGN WORK Design Work, layout, mechanical drawings (NO CHARGE) ELECTRICAL VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP 1 GAS STEAM SIZE MBTU KW CONN INLET SIZE RETURN SIZE LB/HR PSIG (MIN) PSIG (MAX) 1 1 C WATER HOT SIZE HOT AFF HOT GPH COLD SIZE COLD AFF FILTERED SIZE FILTERED AFF CONDENSER INLET SIZE CONDENSER OUTLET SIZE Above pricing is good for 30 days from quotation date. Please call for extensions. 50% down payment at time of order. 45% due before delivery of equipment 5% due upon job completion C WASTE INDIRECT SIZE DIRECT SIZE All gas, plumbing and electric, including all control wiring and inter -connection of any individual items, is by others. Ventilation does not include roof penetrations, duct work or fire rating duct work, light bulbs, sprinkling of duct work, permits, or interlock between exhaust fan and make-up air units. Receiving and installation of hoods by others. Hood pricing is based on ceiling grid being installed and fastened to top of hood and does not include any insulation on ventilator if exposed into ceiling or required by fire codes. Fire extinguishing system does not include final connection of surface and duct collar nozzles. Piping to test valve and drain to be done by Sprinkler Contractor. Gas solenoid valve provided by Premier and installed by others. Shunt trip circuit breakers to be provided and installed by others. Walk-in boxes do not include any enclosures to ceiling unless otherwise specified and noted. Light bulbs and fluorescent light bulbs are not included and are to be by others. Dunnage removal by others. The dunnage will be stacked, piled and loaded into a dumpster provided by others on jobsite at time of installation. If provisions to remove dunnage from jobsite are not made, additional cost incurred by Boelter Premier to do so will be added to our invoice. Permit, plan review fee, health department and inspection fees by others. Prices and specifications subject to changes after review of local inspectors and health department. Orders will not be executed until all credit terms and contract documents have been completed and approved. Installation price does not include any crane or special unloading equipment charges or overtime rates. Our installation quote is Page 17 of 18 1110712021 Lord Fletchers - Upstairs bar - Spring based on the site being ready to accept equipment. The site is ready for equipment installation and fixtures when: 1. Access is clear to enter the building and kitchen for setting equipment from a finished parking lot surface suitable for fork truck. 2. The finished floor must be complete, grouted, and clean of construction materials and debris. 3. Walls have finish material applied. 4. Ceiling grid and pads are installed. If not installed, owner will take responsibility for any equipment damage caused by other trades people. 5. Plumber and electrician are on the job site. Any additional trips to the site, movement or storage of equipment resulting from site being inaccessible or not ready, will be charged as an extra to the contract. Final set and sealing will only be done once. If a second trip is required due to lack of other trade or customer cooperation, the additional labor will be added as an extra to the contract at prevailing rates. Any overtime costs incurred for reasons beyond our control required to complete this installation within the time frame outlined will be charged as an extra to the contract. All equipment is to be started up at the same time. If additional trips are required due to lack of other trade or customer cooperation, the additional labor will be added as an extra to the contract at prevailing rates. Manufacturer's standard catalog items are returnable subject to manufacturer's acceptance. Items must be unused and packaged in original carton. Manufacturer's standard restocking charge plus return freight to factory will be deducted from the credit issued by Boelter Premier. If not in original carton, a cartoning or crating charge will apply. Custom equipment is not returnable. The research and compliance with governmental and insurance code requirements not specifically addressed in this proposal, is and remains the responsibility of others. Boelter Premier extends the same warranties on the equipment quoted as are extended to Boelter Premier by the Manufacturer. All warranty information is available at the principal offices of Boelter Premier. Sales Tax as listed above is based on current tax rates and codes. If there are changes to the tax rate and/or tax code, sales tax on the final invoice will be based on the prevailing rate at the time the project is completed, regardless of when the contract was signed. Boelter Premier is not liable for legislative changes that affect sales tax. Thank you for the opportunity to quote on the above items. If you have any questions please feel free to call. We look forward to the opportunity to work with you on this project. Sincerely, Boelter Premier Page 18 of 18 ' Glastender CS-42X32-CCW Item #1 Project: AIA# Item #: Qty: SIS# A family company manufacturing in the USA Model #: NOTE: Cocktail stations can be ordered without the laminated front and end panels for customers who wish to provide their own. Add the suffix `-S' in the model number when ordering. CS-42x32-CW or CS-42x32-CCW Standard Features • Pass thru ice bin - capacity 110# • Two wet waste sinks with strainers - dimensions: 9-1/4" by 11-1/2" by 6" deep • Gooseneck faucet • Stainless steel draining tray shelf with removable perforated inserts • Tubing chase - dimensions: 4" by 8" by 6-1/2" high • Double speed rail - dimensions: 24" long by 10" deep - capacity: 12 bottles • Blender shelf - dimensions: 16" long by 10" deep • Laminated wooden front and end panels, specify laminate manufacturer, color, and catalog number when ordering (Conversion to stainless steel front and end panels is available) • Available in clockwise or counterclockwise rotation To view underbar installation instructions, please visit: https://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf To view cleaning and care instructions, please visit: https://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf I Specifications Ice Bin • 16" by 26-1/2" by 10-1/2" deep • Sink Bowls • 9 1/4" b 11-1/2" b 6" deep Y Y p M.,n,N Tubing Chase • 4" by 8" by 6-1/2" high Intertek Sneeze Guard (optional) 4004503 • 17-1/4" by 27-1/2" by 10" high Conforms to NSF/ANSI STD 2 Ice Bin Drain Certified to CSA STD B45.4 • Standard model ... 1-1/2" tailpiece • Ten circuit cold plate models ... 1/2" MPT Sink Drains • 1-1/2" I.P.S. Threaded drain will fit Dearborn part #8033 slipnut and part #W-573P washer. Tray and Overshelf (optional) Drains • 1/2" tailpiece Faucet • On 4" centers, accepts 3/8" sink leads, hot and cold water connections required Cold Plate • Ten circuit available Shelf Heights • Tray shelf...44" • Single overshelf (optional) ... 69" • Double overshelf (optional) ... 63" and 72" Rotation • Ice bin can be at bartender's left (clockwise) or right (counterclockwise) - specify when ordering Materials • 20 gauge stainless steel parts include: tray shelf and inserts, tubing chase, work surface, blender shelf, double speed rail steps, bowls, and ice bin (Stainless front and end panels if specified) • 18 gauge stainless steel parts include: leg set cross braces and leg pads • 16 gauge stainless steel parts include: leg mounting brackets and legs • 14 gauge stainless steel parts include: blender shelf ends and double speed rail ends • Laminated wooden front and end panels • 1/4" clear acrylic sneeze guard (optional) Recommendations • Provide 12" by 12" open floor drain (safe waste) under ice bin - consultlocalcodes • Provide 120V, 20 AMP, four-plex electrical outlet below ice bin for appliances such as blenders, carbonators, dispensers, etc. &WARNING: The plastic wet waste strainer included with this product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Warning applies to State of California only. Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780 ApprovaVNotes: 989.752.4275 •800.748.0423 • Fax 989.752.4444 www.glastender.com Specifications subject to change without notice. For current specifications please visit our website. Printed in USA CS-42x32 Rev. I 1-09-20 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 1 Glastender CS-42x32 Cocktail Station CS-42X32-CCW Item #1 Dimensional Information CS-42x32-CW (Clockwise Rotation) CS-42x32-CCW (Counterclockwise Rotation) TUBING CHASE 32" TRAY SHELF 42" 401/4" 15" SINKS HOT & COLD WATER FAUCET 42" Imo-- 401/4" � ENO PANEL 41 9/16" 0II II II �I_ _ 11 JI II `11— II � II II 1 I _ Jlk I G II II II O II II �� ICE BIN ICE BIN BLENDER SHELF BLENDER SHELF DOUBLE SPEED RAIL DOUBLE SPEED RAIL BARTENDER SIDE BARTENDER SIDE PLAN VIEW PLAN VIEW 69" OPTIONAL SINGLE OVERSHELF OPTIONAL SNEEZEGUARD 30" 72" 63" OPTIONAL DOUBLE OVERSHELF OPTIONAL SNEEZE GUARD 44" 45" TRAY SHELF TRAY SHELF 16" 19" BARTENDER SIDE ELEVATION BARTENDER SIDE ELEVATION OPTIONAL ACCESSORIES MODEL DESCRIPTION MODEL DESCRIPTION CPS-4202 Convert laminated panels to stainless IBD-H-CS32 Ice bin divider, half 02001023 Ten -circuit sealed cold plate CCD/T Clip -on condiment dispenser SOS/SS-42 Stainless steel single overshelf 03000509 Sneeze guard DOS/SS-42 Stainless steel double overshelf CDRY Clip -on dry waste, stainless steel Q&X. 5400 North Michigan Road • Saginaw, MI.48604-9780 989.752.4275.800.748.0423 • Fax 989.752.4444 www.glastender.com Printed in USA Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 2 Glastender DOS/SS-42 Item #1 Project: AIA# Q&ftM&XO Item #: Qty. SIS# A family company manufacturing in the USA Model #: DOS with enndd panel nXTV mounting brackets Intertek 4004503 Conforms to NSF/ANSI STD 2 15" 1" 2"-------Tj------- fEnd View SOS/SS- * Single Overshelf DOS/SS- * Double Overshelf * Reflects the length of the overshelf in inches I Standard Features I Stainless steel draining overshelves are optional accessories for all Glastender pass thru cocktail stations. They come in single or double versions. Overshelves are constructed of 20 gauge stainless steel and have stainless steel removable perforated inserts. The perforated inserts are recessed relative to the side rails to help prevent glassware from inadvertently sliding off the shelf. The drain is a 1/2" welded tailpiece. Overshelves are also available separately for installation into existing cocktail station areas. All overshelves are 15" front -to -back. The over - shelf length varies depending on the installation requirements. Overshelves include mounting brackets for one of three different instal- lation situations: end panel, bar top, or wall mount. The bar top and end panel mounting brackets are made with 3/4" stainless steel bar stock. To view underbar installation instructions, please visit: http://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-01 l_ss_clean_care.pdf Isometric View and Mounting Details 3/4" Single Overshelf Front View Bracket 1 3/4" End Panel End Panel Mounting Bracket 3/4" 7 1 /Bra cket Bar Toplz Bar Top Mounting Bracket Double Overshelf Front View Shelf _�. \--- 1" T Mounting Bracket Wall Mounting Bracket Glastender, Inc. - 5400 North Michigan Road - Saginaw, Ml - 48604-9780 Approval/Notes: 989.752.4275 - 800.748.0423 - Fax 989.752.4444 www.glastender.com Specifications subject to change without notice. For current specifications please visit our website. Printed in USA 2.16 Rev. 03-18-16 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 3 Glastender LDA-24D Item #2 awkMh&TO A family company manufacturing in the USA DA-24 n. Intertek 4004503 Conforms to ANSI/NSF STD 2 Project: AlA# Item #: Qty: SIS# Model #: See reverse side for model number key Standard Features • Easily usable height for storage • All stainless steel construction and stainless steel bullet feet • Includes radius interior corners for easy cleaning • Four (4) levels of liquor bottle storage for 24" deep models and five (5) levels for 29" deep models • Bottle retaining rails with clear lift-off liquor identification cover • Open step -and -rail design for easy cleaning and better view of bottles • Locking covers are available for each individual row, see Locking Speed Rail Covers on page 3.32 • Matches speed rail design for continuity • Specially designed side profiles to align with four different equipment mounting situations • Standard models available in 6" incremental lengths from 12" to 42" (Custom sizes also available) • Rear step on each model is extra wide for specialty liquor bottles To view underbar installation instructions, please visit: https://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf To view cleaning and care instructions, please visit: https://www.glastender.com/PDF/F-423-011_ss_clean care.pdf Specifications Product Information Legs • 1-5/8" diameter, 16 gauge stainless steel • Stainless steel bullet feet Materials • 20 gauge stainless steel parts include: all components unless otherwise noted • 18 gauge stainless steel parts include: leg pads • 14 gauge stainless steel parts include: sides • PVC plastic step and rail covers Liquor Steps provide tiered liquor bottle storage at a height convenient for bartender use. They maintain the same easy to clean, open step and rail design as a speed rail. Each step and rail has PVC sound deadening covers and each rail includes a clear lift-off liquor identification cover. The 24" deep models provide four levels of storage front to back and the 29" deep models provide five. Liquor steps cannot have a speed rail mounted to them. Since speed rails are so common on underbar, liquor steps have been designed to align with underbar that has a speed rail. The four different liquor steps styles are based on the four different equipment mounting situations. Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI.48604-9780 Approval/Notes: 989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Specifications subject to change without notice. For current specifications please visit our website. Printed in USA LD Rev. 02-19-20 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 4 Glastender LDA-24D Item #2 Liquor Steps Dimensional Information 24" Deep Models PLAN VIEW (both models) Single MdeC Imber'i„'' LDA-12S LDB-12 12" LDA-18S LDB-18 18" LDA-24S LDB-24 24" LDA-30S LDB-30 30" LDA-36S LDB-36 36" LDA-42S LDB-42 42" Ali r—f fnr No SI FRONT LDA- * S LDB- * ELEVATION SIDE ELEVATIONS * Denotes length in inches 29" Deep Models --1111 PLAN VIEW (both models) Ali--f fnr Dout o 10111,1 cfl Iter LDA-12D LDB-12S 12" LDA-18D LDB-18S 18" LDA-24D LDB-24S 24" LDA-30D LDB-30S 30" LDA-36D LDB-36S 36" LDA-42D LDB-42S 42" Alignment for Single Speed Rail FRONT LDA- * D ELEVATION — SIDE ELEVATIONS iffi5400 N Michigan Rd • Saginaw, MI-48604-9780 989.752.4275 - 800.748.0423 • Fax 989.752.4444 ff® www.glastender.com 29" LDB- * S * Denotes length in inches Printed in USA Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 5 Glastender DBA-48 Item #3 okotf mh&xe A family company manufacturing in the USA OT) W, .N�7 InterteK DBA-18 shown with 4004503 Conforms to ANSIMSF STD 2 optional speed rail Project: AIA# Item #: Qty. S1S# Model #: See reverse side for model number key Standard Features • All stainless steel construction • Adjustable stainless steel bullet feet • Work surface consists of a drain pan and separate perforated insert for better air circulation • One piece, seamless top and backsplash featuring 1/4" radius corners for easy cleaning • Standard models available in 6" incremental lengths from 12" to 48" (Custom sizes also available) • 24" deep models provide a larger drainboard storage area not just a deck extension on the back of 19" deep model • All storage is on a level plane • A 4" by 4" by 6-1/2" high tubing chase is available. Specify model number "TC" as an accessory • Also available with flat stainless steel filler board top in lieu of drainboard top. Substitute an "F" for the "D" in the model number when ordering To view underbar installation instructions, please visit: http://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf Specifications Drain • 1 1/2" I.P.S. Threaded drain will fit Dearborn part #8033 slipnut and part #W-573P washer Legs • 1-5/8" diameter, 16 gauge stainless steel • Stainless steel bullet feet Materials • 20 gauge stainless steel Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI •48604-9780 Approval/Notes: 989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Specifications subject to change without notice. For current specifications please visit our website. Printed in USA 3.09 Rev. 04-15-19 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 6 Glastender DBA-48 Item #3 Drainboards Dimensional Information "A" Depth-19" Deep Models DRAIN Model DBA-18 shown REMOVABLE PERFORATEDINSERT oo�Ooo voe 19„ PLAN VIEW BACKSPLASH 19, OVERALL LENGTH OPTIONAL SPEED RAIL I _ — — — — — — — — — — 37„ 1 SIDE VIEW 1-1"ADJUSTMENT FROM 3T'TO311"` FRONTVIEW "B" Depth-24" Deep Models DRAIN Model DBB-18 shown REMOVABLE PERFORATEDINSERT oo PLAN VIEW ooaao.00000000000 JIUC VICVV a ; 5400 North Michigan Road • Saginaw, MI •48604-9780 r 989.752.4275 - 800.748.0423 • Fax 989.752.4444 Nen el ® w wd.glastender.com VIEW Model Number Overall Length DBA-12 12" DBA-18 18" DBA-24 24" DBA-30 30" DBA-36 36" DBA-42 42" DBA-48 48" Model Number Overall Length DBB-12 12" DBB-18 18" DBB-24 24" DBB-30 30" DBB-36 36" DBB-42 42" DBB-48 48" Printed in USA Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 7 Glastender DSR-48 Item #3 ahAffi&ZO A family company manufacturing in the USA ok&_ Intertek 4004503 Project: AIA# Item #: QtY. SIS# Model #: (model numbers on reverse side) Standard Features • All stainless steel construction • Open step -and -rail design for easy cleaning and better view of bottles • Radius corners on steps and rails for easy cleaning • PVC sound deadening covers • Long underbar skirt allows speed rails to mount low enough that bottles do not rise above deck surface and inhibit work- flow • Single and double step models • Locking covers are available (see reverse side for model numbers) • Locking covers for single speed rails include built-in storage hangers when ordered with original equipment • Available in custom lengths up to 84" • Rails have a clear snap -on liquor identification label cover To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf Specifications Materials • 20 gauge stainless steel parts include: steps, rails, and locking covers • 14 gauge stainless steel parts include: ends • PVC step and rail covers WJ SSR-36 with SSRC-36 in storage below Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI.48604-9780 Approval/Notes: 989.752.4275 - 800.748.0423 • Fax 989.752.4444 www.glastender.com Specifications subject to change without notice. For current specifications please visit our website. Printed in USA Rev.12-07-16 3.32 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 8 Glastender DSR-48 Item #3 Speed Rails and Locking Covers Dimensional Information Single Speed Rails are available in one inch increments from 12" to 84" in length. The model number designation is SSR- X, where X = the length of the unit in inches. Speed rails over 48" also have a center support. x I rrF T PVC PLASTIC COVER 5" OVER STAINLESS STEEL "C" L CHANNEL PLAN VIEW 4" •,--- 81 8 1/4" � e s i L5"—J FRONT ELEVATION SIDE ELEVATION Single Speed Rail Locking covers are available in one inch increments from 12" to 48". The model number designation is SSRC- X , where X = the length of the unit in inches. Use multiple covers for speed rails longer than 48". (NOTE: 24" and 29" deep Liquor Displays require multiples of four and five locking covers, respectively) LOCKING SPEEC 3 3/8" LOCKING SPEED RAIL COVER HANGER AVAILABLE WITH SINGLE SPEED RAIL ONLY SSR- X I SSRC- x Double Speed Rails are available in one inch increments from 12" to 84" in length. The model number designation is DSR- X, where X — the length of the unit in inches. Double speed rails over 48" also have a center support. PLAN VIEW �e 101/ FRONT ELEVATION 4" 4" .I lsi 10 1 /2" L— 10.. --� SIDE ELEVATION Double Speed Rail Locking covers are available in one inch increments from 12" to 48". The model number designation is DSRC- X , where X = the length of the unit in inches. Use multiple covers for speed rails longer than 48". (NOTE: Double speed rail locking covers are actually just two single speed rail locking covers.) 3 3/8" LOCKING COVER J6 13/16" 13 7/T 8" i„ J-HOOK SPEED RAIL DSR- X I DSRC- X QA 5400 North Michigan Road • Saginaw, MI.48604-9780 989.752.4275 - 800.748.0423 • Fax 989.752.4444 ® www.glastender.com Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Printed in USA Page: 9 Glastender SWB-12 Item #4 Project: AIA# O&OWn&r Item #: QtY: SIS# � #: A family company manufacturing in the USA Model S1 SWA-12, SWA-18, SW13-12, SWB-18 Standard Features • Manufactured with total welded construction to meet NSF standards • All stainless steel construction • One-piece seamless top and backsplash featuring 1/4" radius corners for easy cleaning • Adjustable stainless steel bullet feet • 9-1/4" by 11-1/2" by 6" deep sink bowl with hot and cold water faucet • Faucets are standard and ship mounted • Includes a lift -out perforated plastic wet waste strainer n(UN!, Intertek 4004503 Conforms to ANSI/NSF STD 2 Certified to CSA/CAN STD B45.4 All faucets are NSF/ANSI 61, Annex G �Iz low lead compliant Specifications Drain Sink Bowl Dimensions • 1-1/2" I.P.S. Threaded drain will fit Dearborn part • 9-1/4" by 11-1/2" by 6" deep #8033 slipnut and part #W-573P washer Faucet • Deck mount on 4" centers, accepts 3/8" sink leads, hot and cold water connections required (excluding Model SWA-12) • Model SWA-12: Backsplash mounted on 4" centers, accepts 3/8" sink leads, hot and cold water connec- tions required • NSF/ANSI 61, 372 low lead compliant Legs • 1-5/8" diameter, 16 gauge stainless steel • Stainless steel bullet feet Materials • 20 gauge stainless steel parts include: all components unless otherwise noted QI WARNING: The plastic wet waste strainer included with this product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. . Warning applies to State of California only. To view underbar installation instructions, please visit: https://www.glastender.com/PDFIF-750-165_Underbar_Installation Instructions. pdf To view cleaning and care instructions, please visit: https://www.glastender.com/PDF/F-423-011 _ss_clean_care. pdf Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI.48604-9780 Approval/Notes: 989.752.4275 - 800.748.0423 • Fax 989.752.4444 www.glastender.com Specifications subject to change without notice. For current specifications please visit our website. Printed in USA ► 12A Rev.04-08-19 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 10 Glastender SWB-12 Item #4 Wet Waste Sinks Dimensional Information PLAN VIEWS �12„� 71811 O 19" O 19" SWA-12 SWA-18 FRONT RAIL O 24" O 2411 SWB-12 DRAIN SWB-18 SIDE ELEVATIONS "A" DEPTH SIDE ELEVATION "B" DEPTH SIDE ELEVATION (12" wide unit shown with backsplash mounted faucet. 18" wide units have deck mounted faucet.) 5400 N Michigan Rd • Saginaw, MI •48604-9780 989.752.4275 - 800.748.0423 • Fax 989.752.4444 Q&X. www.glastender.com Printed in USA Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 11 Glastender GT-24-CW-208 Item #7 ahAM&ZO A family company manufacturing in the USA GT-24-CW •,ET��v. c ETA uS ��11gN 1P" liaTEd Intertek Intertek 4004503 Conforms to NSF/ANSI STD 3 and UL STD 921 Certified to CSA STD C22.2 No. 168 Specifications General Plumbing [Hot water and cold water required] • Plumb with 1/2" water supply. Adapt to 3/8" FMPT. • Minimum water pressure is 25 PSI • Maximum water pressure is 100 PSI. Install water pressure regulator if line pressure is over 100 PSI. Water valve on unit has built-in strainer and flow control to provide consistent volume between 25 and 100 PSI • Install separate water shut-off valve for each connection • Unit has built-in air gaps. Vacuum breakers are not required Hot Water Only • Maximum temperature is 150OF (660C), minimum is 130°F (540C). • Initial fill is 3 gallons. Maximum consumption is 1/4 gallon per minute during operation Cold Water Only • Minimum temperature is 750F (24°C) per FDA Code. Install hot/cold mixing valve if necessary. • Initial fill is 2-1/4 gallons, maximum consumption is 2 gallons per minute during operation Drain • 1-1/2" tailpiece • Use open type floor drain for maximum drainage • Two white plastic drain cocks extending below the bottom are for recirculating pump drainage when required for replacement or winterizing. The drain cocks are in the closed position - no plumbing is required. Project: AIA# Item #: Qty: SIS# Model #: GT-24-CW-208, GT-24-CW-240, GT 24-CCW-208, GT 24-CCW-240 Standard Features • Removable top and front shield for easy cleaning access • Available with clockwise or counterclockwise rotation • Conveyor lifts out for easy cleaning • Set of three separate curtains is included • Switch panel may be relocated in the field • Removable side panels for easy service access • Spray boxes unlatch for easy cleaning - engineered for maximum soil removal • 4000 watt heater encased in an incoloy sheath to resist caustic detergents • Digital temperature gauges built into switch panel • Thermostat controls wash tank temperature • Automatic electronic peristaltic metering pumps • 1/6 HP pumps recirculate wash water and rinse water • Fractional HP drive motor powers the belt driven conveyor and includes built-in slip clutch • Sensor activated low water cutoff in wash tank protects heater • Automatic chemical sensor alerts operator when detergent and sanitizer is low • Prime switches provided for high speed chemical priming Electrical • 120/208-240V, single phase, 60Hz, 3-wire (two hot and one neutral), ground connected per local code (green wire), 20 amp for 240 volt or 30 amp for 208 volt (4 wire total), unit will operate within 10% of rated voltage • Dedicated 20 amp circuit required 130 amp for 208V] • A power relay in the unit separates the high and low voltages and directs the respective power to the electrical components. The heater and power light operate on 208 or 240 volts - all other components operate on 120 volts. Detergent • Extra heavy duty, non -foaming, commercial liquid dishwashing detergent is required - .30% concentration • Consult local chemical supplier to match detergent with local water conditions Sanitizer • Liquid chlorine bleach (sodium hypochlorite - 5.25% solution) adjusted to 50 ppm or iodophor adjusted to 12.5 ppm Capacity • 3 minute cycle, 60 second wash and 60 second rinse exposure • 1000 - 2-1/2" diameter or 800 - 2-3/4" diameter glasses per hour (maximum glass height 10" - including pitchers and wine carafes) Materials • 20 and 22 gauge stainless steel parts include: cabinet • 18 gauge stainless steel parts include: floor and tanks • 16 gauge stainless steel parts include: leg mounting brackets and legs • Conveyor is electropolished, welded stainless steel wire Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI.48604-9780 Approval/Notes: 989.752.4275 - 800.748.0423 • Fax 989.752.4444 www.glastender.com Specifications subject to change without notice. For current specifications please visit our website. Printed in USA Rev.07-19-18 1.01 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 12 Glastender GT-24-CW-208 Item #7 29-1/2" 7" GT-24 Glasswasher Dimensional Information COUNTERCLOCKWISE (CCW) ROTATION CLOCKWISE (CW) ROTATION DRAIN- \ 24-1/8" 24 1/8 —1 rDRAIN ROTATION 16" (ROTATION 16" 24-1/8" 24-1/8" D �SWAD r ZZ FRONT 8-1/8 FRONT 8-1/8 POSSIBLE SWITCH PANEL LOCATIONS POSSIBLE SWITCH PANEL LOCATIONS - LEFT SIDE (FOR CCW COCKTAIL STATION) © FRONT (UNDERBAR-CW ROTATION) ©- FRONT (UNDERBAR-CCW ROTATION) QD - RIGHT SIDE (FOR CW COCKTAIL STATION) FRr)MT FI F\/ATIf11J \/IFW TV, MINIMUM CLEARANCE T 38-1 /2" 36-1/2" 16" 29-1 /2" O 7" ADJUSTABLE FROM 38-1/2" TO 39-1/2" —U MINIMUM CLEARANCE T 38-1 /2" 36-1/2" Mechanicals 1. In all cases, consult local plumbing, 3. The Glastender policy of constant quality electrical, and health codes for improvm:nt means specifications are subject regulations which may not be consistent to change without notice. with the information on the front of this 4. Detergent and samfizer containers are stored specification sheet externally. Six-foot lenghts of tubing are provided. 1 The utiltty connections are made from the floor at the bottom of Storage for two one -gallon containers is required within five feet. the unit approximately T'to 8" high 5. Front side service is essential. 24-1 /8" 12-1/16" 2 f 4" U 16-1/8" 12-1/16" 1-7/16"� CCW FRONT 24-1/8" Q1 = HOT WATER =COLD WATER T �f = DRAIN } ®= ELECTRICAL 9 ffiff. 5400 North Michigan Road • Saginaw, MI.48604-9780 989.752.4275.800.748.0423 • Fax 989.752.4444 www.glastender.com Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC 2,--1 I _ `-12-1/16" CW FRONT 12-1/16" 2 4" 16-1 /8" 6-1/2" 1-7/16" Printed in USA Page: 13 Glastender DHSB-12 Item #8 QkAm&ze A family company manufacturing in the USA FOF-D • DHSB-12 nEW W/ Intertek 4004503 Conforms to ANSUNSF STD 2 Certified to CSA/CAN STD B45.4 Optional foot -operated faucet Project: AIA# Item #: Qty: SIS# Model #: DHSA-18, DHSB-12, DHSB-18 Standard Features • Manufactured with total welded construction to meet NSF" standards • All stainless steel construction • One-piece seamless top and backsplash featuring 1/4" radius corners for easy cleaning • Adjustable stainless steel bullet feet • 9-1/4" by 11-1/2" by 6" deep sink bowl with hot and cold water faucet • Faucets are standard and ship mounted • Feature a soap dispenser and hinged front access door to conceal C-fold paper towel dispenser • A lift -out perforated plastic wet waste strainer is available as an accessory. Specify part number 03000483. • Soap dispenser is easily refilled from above, no need to crawl under equipment • Model DHSB-12 is available with a foot -operated faucet. Specify accessory number FOF-D. All faucets are NSF/ANSI 61, Annex G low lead compliant Specifications Product Information Drain Door -style hand sink models feature a soap dispenser and • 1-1/2" I.P.S. Threaded drain will fit Dearborn part hinged front access door to conceal C-fold paper towel dis- #8033 slipnut and part #W-573P washer penser. Paper towels are easily accessed below the door. The Faucet access door is only opened for re -loading paper towels into the • Deck mount on 4" centers, accepts 3/8" sink leads, hot dispenser. and cold water connections required • Optional foot -operated faucet on DHSB-12: single hole, (2) 1/2" NPT female inlets and (1) 1/2" NPT female outlet • NSF/ANSI 61, 372 low lead compliant Sink Bowl Dimensions • 9-1/4" by 11-1/2" by 6" deep Legs • 1-5/8" diameter, 16 gauge stainless steel • Stainless steel bullet feet Materials • 20 gauge stainless steel parts include: all components unless otherwise noted • 18 gauge stainless steel parts include: leg pads &WARNING: The plastic wet waste strainer accessory can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Warning applies to State of California only. To view underbar installation instructions, please visit: https://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf To view cleaning and care instructions. Dlease visit: htti)s://www.izlastender.com/PDF/F-423-011 ss clean care.Ddf Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI.48604-9780 Approval/Notes: 989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Specifications subject to change without notice. For current specifications please visit our website. Printed in USA Rev. 05-28-20 DHS Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 14 Glastender DHSB-12 Item #8 Door -Style Hand Sinks Dimensional Information PLAN VIEWS 191, LIQUID SOAP DISPENSER ACCESS DOOR FOR EASY LOADING OF PAPER TOWELS LIQUID SOAP DISPENSER— a CESS DOOR FOR SY LOADING OF PAPER TOWELS N DHSA-18 DHSB-12 DHSB-18 FRONT AND SIDE ELEVATIONS "A" DEPTH "B" DEPTH SIDE ELEVATION SIDE ELEVATION (12" wide unit shown with backsplash mounted faucet. 18" wide units have deck mounted faucet.) 5400 N Michigan Rd • Saginaw, MI •48604-9780 989.752.4275 - 800.748.0423 • Fax 989.752.4444 Qaff® www.glastender.com Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC DHSB-12 FRONT ELEVATION Printed in USA Page: 15 Glastender IBA-30-CP10 Item #10 gmben&r. A family company manufacturing in the USA Project: AlA# Item #: QtY SIs# Model #: See reverse side for model number key Standard Features • All stainless steel construction • One-piece, seamless top and backsplash • PVC plastic breaker strip around ice bin liner: creates 5/16" raised edge around liner, acts as thermal barrier to prevent heat transfer, and makes the cover slide easier. • Tubing chase available centered in backsplash of 12" and larger models. Specify accessory model #TC-BS. • Available in 6" incremental lengths from 6" to 48" • 24" deep version provides larger ice bin not just a deck exten- sion on the back of the 19" deep model • Sliding stainless steel cover • CFC free foamed -in -place insulation • Adjustable stainless steel bullet feet • Ten circuit available with all 24" and wider models (add suffix `-CP10' to model number ) • Extra deep version is optional (add suffix `-ED' to model number) nou. I•,,4, Intertek 4004503 Conforms to ANSUNSF STD 2 To view underbar installation instructions, please visit: http://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_Care.pdf Specifications Drain • Non -cold plate model: 1-1/2" tailpiece • Ten circuit cold plate model `-CP10': 3/4" MPT Tubing Chase in Backsplash (Optional) • 2-3/8" by 4" hole centered in backsplash Cover • Two-piece sliding cover, 20 gauge stainless steel, included with all models Cold Plate (Models with `-CP10'suffix) • Ten circuit available with all 24" and wider models • Connection is 5/16" O.D. stainless steel tubing with swaged end Liner Depth • 10-1/2" standard • 14-1/2" for extra deep models Ice Capacity • "A" depth standard = 2.79 lbs X length • "A" depth extra deep = 3.85 lbs X length • `B" depth standard = 3.54 lbs X length • `B" depth extra deep = 4.89 lbs X length Legs • 1-5/8" diameter 16 gauge stainless steel • Stainless steel bullet feet Materials • 20 gauge stainless steel • PVC plastic breaker strip around opening of ice bin liner Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI .48604-9780 Approval/Notes: 989.752.4275 •800.748.0423 • Fax 989.752.4444 www.glastendencom Specifications subject to change without notice. For current specifications please visit our website. Printed in USA 3.01 Rev. 12-07-16 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 16 Glastender IBA-30-CP10 Item #10 Ice Bins Dimensional Information "A" Depth-19" Deep Models PLAN VIEW BACKSPLASH OVERALL 1 g"� LENGTH SLIDING COVER III el a I° I OPTIONAL I SPEED RAIL 10 1/2" I I I I I I I 11 I 3 1 SIDE ELEVATION V ADJUSTABLE BULLET FEET "B" Depth-24" Deep Models PLAN VIEW SLIDING COVER FRONT ELEVATION L0 ' 24" L-OVERALL� LENGTH OPTIONAL I I SPEED RAIL I I I I � 10 1/2" � I I I 1 I f VADJUSTABLE BULLET FEET SIDE ELEVATION FRONT ELEVATION 5400 North Michigan Road • Saginaw, MI.48604-9780 989.752.4275 - 800.748.0423 • Fax 989.752.4444 QAff. www.glastender.com Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Modei;Number Overall Length IBA-6* 6" IBA-12 12" IBA-18 18" IBA-24 24" IBA-30 30" IBA-36 36" IBA-42 42" IBA-48 48" Note: 6" unit cannot be free standing Model Number Overall Length IBB-6* 6" IBB-12 12" IBB-18 18" IBB-24 24" IBB-30 30" IBB-36 36" IBB:42 42" IBB-48 48" * Note: 6" unit cannot be free standing Printed in USA Page: 17 Glastender SHA-4 Item #10 OhAM&MXW A family company manufacturing in the USA SHA-6 `,\ I ISO• Intertek 4004503 Conforms to ANSUNSF STD 2 Installation Details Project: AIA# Item #: Qty: SIS# Model #: SHA-4, SHA-4-ED, SHA-6, SHA-6-ED, SHB-4, SHB-4-ED, SHB-6, SHB-6-ED, SHP-4, SHP-4-ED, SHP-6, SHP-6-ED Standard Features • All stainless steel construction • Designed to house the manifold of Wunder -Bar® or Schroeder AmericaTM 8 to 14 button soda guns • Includes integral drip pan with radius corners for easy cleaning • Built-in holder for soda gun • Top cover is removable for access to the soda manifold • Allows you to dictate the soda gun location • Eliminates the need for tubing bundles above the work surface • Designed to mount to at least one other piece of underbar equipment (there is no provision for leg mounting) • Includes camlock in backsplash for mounting to adjacent underbar • Extra deep "-ED" models available to align with extra -deep style ice bins Specifications Drain • 1/2" welded tailpiece Materials • All stainless steel construction Figure 3 Figure 4 1. Remove three cover screws and the cover (Figure 1). 2. Remove the manifold containment bracket by removing the thumbscrew (Figure 2). 3. Plumb drip pan drain, which may be more convenient to do while the cover is removed. 4. Connect soda tubing from inside housing to soda gun manifold (Figure 3). Figure 5 Figure 6 5. Insert manifold and lines into the housing while placing the soda gun line in the front cut-out. Secure the manifold in place with the bracket and thumbscrew removed in step two (Figure 4). 6. Reattach cover with the three screws removed in step one (Figure 5). 7. Set the soda gun in the holder (Figure 6). 8. Installation complete. To view underbar installation instructions, please visit: https://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf To view cleaning and care instructions, please visit: https://www.glastender.com/PDF/F-423-011_ss_clean care.pdf Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780 Approval/Notes: 989.752.4275 - 800.748.0423 • Fax 989.752.4444 www.glastender.com Specifications subject to change without notice. For current specifications please visit our website. Printed in USA Rev. 10-29-20 SH Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 18 Glastender SHA-4 Item #10 Soda Gun Holders Dimensional Information PLAN VIEWS ACCESS �. q" �6"' I—� COVER �- ►r4" 14 19„ 14" 14 24" ® ® SHB-4 NOA SHA-4 SHA-6 SHB-4-ED SHA-4-ED SHA-6-ED FRONT VIEWS SHA-4 SHA-6 SHB-4 SHB-6 21" 25" SHP-4 SHP-6 T 18" T 22" SHP-4-ED SHP-6-ED SHA-4-ED SHA-6-ED SHB-4-ED SHB-6-ED 38" �- — 30-3/8" �{ O O' O O O 18" 14" 0 0 0 o e SHP-4, SHP-6 BACKSPLASH NOTE: Soda Gun is not included SHP-4, SHP-4-ED F- — 30-3/8" T i® 14" L r 38" ° SHB-6 s C SHB-6-ED 30-3/8"� SHP-6, SHP-6-ED SIDE ELEVATIONS SHA-4, SHA-6 SHA-4-ED, SHA-6-ED 5400 N Michigan Rd • Saginaw, MI •48604-9780 989.752.4275 - 800.748.0423 • Fax 989.752.4444 www.glastender.com 22" 18" SHB-4, SHB-6 SHB-4-ED, SHB-6-ED SHP-4-ED, SHP-6-ED Printed in USA Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 19 Glastender IFC-24/30R Item #13 QkAM&xO A family company manufacturing in the USA 4 Intertek 4004503 Conforms to ANSIMSF STD 2 Project: AIA# Item #: Qh''. SIS# Model #: IFC-19/19, IFC-19/24L, IFC-19/24R, IFC-19/30L, IFC-19/30R, IFC-24/24, IFC-24/30L, IFC-24/30R Standard Features • Stainless steel construction • Designed to mount between two adjacent pieces of Glastender underbar equipment • Work surface consists of a drain pan and separate perforated insert for better air circulation • Work surface features 1 /4" radius comers for easy cleaning • Custom sizes available To view underbar installation instructions, please visit: http://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf Specifications Product Information Drain • 1-1/2" I.P.S. Threaded drain will fit Dearborn part #8033 slipnut and part #W-573P washer. Materials • 20 gauge stainless steel parts include: all components unless otherwise noted • 14 gauge stainless steel parts include: front rail Dimensional Full Corner Drainboards are for 90' inside turns only. The dimensions of the corner are specified in the model number. If the dimensions of each side are not the same, the longest dimension is specified second along with its location. See drawings on back. Corner drainboards are designed to mount between two pieces of underbar. However, corner drainboards can be used to mount between any two stable vertical surfaces. Comers should not be mounted to objects that are mobile or on casters. Because they are intended to mount between two vertical surfaces, comer drainboards do not come free standing with finished sides and leg sets. If one side of the corner does not have a vertical surface on which to mount, then a side and leg set must be ordered as an accessory. Specify the following model numbers: CA -LEG - 19" deep CB -LEG - 24" deep Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI.48604-9780 Approval/Notes: 989.752.4275 •800.748.0423 • Fax 989.752.4444 www.glastender.com Specifications subject to change without notice. For current specifications please visit our website. Printed in USA I«ll Rev.04-15-19 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 20 Glastender IFC-24/30R Item #13 Corner Drainboards Dimensional Models Dimensional Information BACKSPLASH DRAIN PLAN VIEWS 000a0000000000;;; 191, °oeeeee oaeeoao� e;;; c; L-1 9', l L—24' I FC-19/19 IFC-19/24L BACKSPLASH DRAIN ov=$io ••a •s3: o 719"PLAN VIEWS aoo soa �24 �30"l IFC-19/24R IFC-19/30L BACKSPLASH DRAIN o q.eeeeee. ea sa. sea Oo Ba 24" PLAN VIEWS 19 eoo aoo 30" I FC-19/30R I FC-24/24 BACKSPLASH DRAIN o'°i ageeeeeaa sae ee sasses ease eqs be .. eS:a PLAN VIEWS 24 ooesaeeepe°seesNN0000eeeeevesee;; --- 30"� 30" IFC-24/30L IFC-24/30R o 5400 North Michigan Road • Saginaw, MI •48604-9780 r.www.glastender.com • Fax 989.752.4444 Nen e o www.glastender.com Printed in USA Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 21 Glastender C1FB84 Item #18 Project: AIA# Ghzten&r Item #: Q1Y: SIS# � #: A family company manufacturing in the USA Model . a CIFB60 with compressor left, glass doors, and CIFB32, C1FB36, C1FB52, C1FB60, stainless top C1FB72, C1FB84, C1FB92, CiFB108 C 1 FB Configurable Options wen steorClopafibl qe Temperature: Shelving (specify per door section): • Beer/Food - 34°F to 40°F •Three adjustable shelves CONFIGURATION HIGHLIGHTS White wine - 50°F to 55°F • Red wine - 60°F to 65°F • • ' ' ' ' ' Refrigeration Compartment Location: • • Left or Right Refrigeration Compartment Cover Finish: • Black vinyl -clad UnlETA c �� us nxav Stai less std • Stainless steel T ,T1O1,,,s• Jeweled stainless • Laminated Intertek Intertek Intertek Door/DrawerStyle &Finish: EP 5016978 4004503 • Door - Black vinyl -clad Energy Performance Conforms to NSF/ANSI STD 7 • Door - Unlaminated Verified / Rendement and UL STD 471 • Door - Stainless steel �nerg(�tique Vi�rifi6 Certified to CSA STD C22.2 No. 120 • Door - Jeweled stainless Listed to NSF Standard 7 •Door -Laminated for open food as a storage refrigerator . Door - Glass, black vinyl -clad Standard Features • Door - Glass, stainless steel • Door - Glass, jeweled stainless • Locking door(s) • Door - Glass, laminated • LED interior lighting • Drawers - Black vinyl -clad • Heated mullion to minimize condensation • Drawers - Unlaminated • Evaporator above compressor compartment to • Drawers - Stainless steel • Drawers- Jeweled stainless maximize storage capacity • Drawers - Laminated • Any door opening may be converted to a drawer Door Hinge Location (specify for section or to draft dispensing each door): • Available without a finished top for integrated • Left or Right installation below customer supplied bar top See page 3 of this spec for a • 180° swinging door complete list of cooler accessories. • Keg rack • Pull-out wine shelves: » w/combination upright and horizontal storage » w/upright storage » w/horizontal storage (Note: not available for the door next to the compressor compartment) Door Handle: (Note: drawers come with a stainless pull tab handle) • Polished stainless • Polished brass • Stainless pull tab Top Style: • No finished top • Stainless top • Laminated top Left and Right Side Finish: • Black vinyl -clad • Stainless steel • Laminated Back Finish: • Galvanized steel • Stainless steel LED Lighting Style: • Bright white (7,000k) • Warm white (3,500k) • Amber (2,700k) • Blue Specifications Electrical Plumbing • 120V, 1 phase, 60 Hz • Automatic condensate evaporator. No drain connection required. • Full load amps - CIFB32, CIFB36 - 3.0, C1FB52, C1FB60, Shelving CIFB72, CIFB84, CIFB92, CIFB108 - 7.0 • Three adjustable coated shelves per door included (does not include • Dedicated 15 amp circuit is required sections with drawers or pull-out wine shelves) • Includes a 6 foot NEMA 5-15P grounded cord and plug Two to six pull-out wine shelves per door optional which exits the back of refrigeration compartment WI ' Refrigeration • R290 - 125 grams 5-15P • Compressor- CIFB32, CIFB36 - 1/8HP, CIFB52, CIFB60, CIFB72, CIFB84, CIFB92, CIFB108 - 1/4HP • Heat rejection - CIFB32, CIFB36 - 1228 BTU/Hr, CIFB52, CIFB60, CIFB72, CIFB84, CIFB92, CIFB108 - 2867 BTU/Hr Operating Range • 34°F (1°C) to 40°F (4°C) Materials • Stainless steel parts include: exterior sub -top, interior, front of cabinet, hinges, hinge and lock brackets, and optional legs • Black vinyl -clad steel parts include: standard sides, doors and compressor cover • Galvanized steel parts include: back and bottom • Zinc plated CR steel parts include: leg sockets Weight Bearing Capacity • Counter tops and other accessories should not exceed 500 pounds per door Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780 Approval/Notes: 989.752.4275 - 800.748.0423 • Fax 989.752.4444 www.glastender.com Specifications subject to change without notice. For current specifications please visit our website. Printed in USA Rev. 09-21-21 C1FB Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 22 Glastender C1FB84 Item #18 Coolers - One Zone, Front Serviced, Bar Profile Dimensional Information PLAN VIEWS RECESSED BACK FOR RECESSED BACK FOR ELECTRICAL PLUG SPACE 16" DOOR PENING ELECTRICAL PLUG SPACE 20" DOOR OPENING 1-1 12"� X y 1-1/8' 12"� - X Y SWING WILL T----- - - - - -- i SWING WILL T -- CONTINUE I-- - - - - --- 18" CONTINUE IF BACK LINER TO I 2 NO CABINET I - INSIDE DOOR SILL I PTO I PEDE I I IF NO 18„ BACK LINER TO I 2 CABINET INSIDE DOOR SILL i TO IMPEDE _ _ I S_ZGF=------- ll iSStd7R1=1I-I---____I \ � 180* SWING / I ��i � 180° SWING) CONDENSING UNIT \ i CONDENSING UNIT \ i COMPARTMENT _ _ COMPARTMENT =—OPTIONAL - - - OPTIONAL DRAWER DRAWER FRONT VIEWS 16" DOOR OPENING 20" DOOR OPENING _ l� 'I ■�� OPTIONAL DRAWERS ADD 1" TO HEIGHT FOR FACTORY INSTALLED 5" TOP COMBINATION UPRIGHT/HORIZONTAL UPRIGHT PULL-OUT HORIZONTAL PULL-OUT PULL-OUT WINE SHELVES WINE SHELVES WINE SHELVES SIDE VIEWS 16" DOOR OPENING 20" DOOR OPENING STANDARD CABINET WITH OPTIONAL DRAWERS ADD 1" TO HEIGHT FOR FACTORY INSTALLED 35' TOP 9 OEM == 1••• OPENING FROM -_ 1 s� 4DD 1" ADD 1" TO HEIGHT FOR FACTORY INSTALLED TOP TO-25 1/4"--I_� I 43"�— OPTIONAL LEGS EIGHT tl FOR — — }— — — — — — AND CASTERS ,CTORY I I I I I JALLED 1 30 3/4" I 13-1/2' TOP I IJ -L I I I I 35" 7 I 35" 6- to � 20 'I I I 7-1 /4' 3-3/4 rg 2-5/6'1(T7N I I I I 6' LEG 4' CASTER 2-12' CASTER MODELS SHOWN WITH OPTIONAL 6" LEGS IL4 cv Note: Available with compressor left or right. Compressor left model shown *Wine bottle capacity is based on adjustable she lves. Drawers will hold less. Capacities 16" Door Opening Models X Y DOORS 12 oz. bottles, cases 750mi wine bottles * 1/2 barrel kegs 1/6 barrel kegs ClFB32 32" 16" 1 5.8 57 N/A 2 ClFB52 52" 36" 2 13.3 116 N/A 7 ClFB72 72" 56" 3 21.1 188 N/A 11 C1FB92 1 92" 76" 1 4 28.8 260 N/A 15 Capacities 20" Door Opening Models X Y DOORS 12 oz. bottles, cases 750mi wine bottles* 1/2 barrel kegs 1/6 barrel kegs ClFB36 36" 20" 1 7.8 70 1 4 ClFB60 60" 44" 2 17.3 164 2 8 ClFB84 84" 68" 3 1 27.1 248 4 14 ClFB108 1 108" 1 92" 1 4 36.8 1 332 1 5 1 18 5400 N Michigan Rd • Saginaw, MI •48604-9780 989.752.4275 - 800.748.0423 • Fax 989.752.4444 Q&X® www.glastender.com Printed in USA Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 23 Glastender C1FB84 Item #18 Direct Draw Draft Beverage Towers and Accessories Configuring Bar Profile Coolers for Draft Beverage Dispensing All Glastender bar profile coolers can be configured for draft beverage dispensing. Please note that a minimum 17" wide door opening is required for full size (i.e., 16" diameter) 1/2 barrel kegs. Refer to the capacity statements in the Product Directory or Specification Sheet for the sizes and quantities of kegs each unit will hold. Direct Draw Draft Beverage Towers Glastender Beverage Towers come standard with the stainless steel faucets and shanks necessary to dispense keg beer, wine, soda, coffee, or cocktails. See individual spec pages for complete information. Look for the Draft Beer Compatible logo ►Ve y]�}sr�� s ?�s 1 BRT-20-SSR CT-3-SS r-,,'BT4-SS Bridge Towers Column Towers Tee Towers *; See spec page BRT for See spec page CT for See spec page BT for complete information complete information complete information Tower Cooling Kits Direct draw beverage towers are chilled by air from inside the host cooler. This is especially important for draft beer, as warm faucets cause the beer to foam. MODE 6 DESCRIPTION AI TCK12-1 For 1 & 2-door coolers w/ one tower column 3# TCK12-2 For 3 & 4-door coolers w/ two tower columns 6# TCK34-1 For 3 & 4-door coolers w/ one tower column 8# TCK34-2 For 3 & 4-door coolers w/ two tower columns 11# �ywtitt" PRK-BC 13 rt. REG-M-HP 05001026 .d 05000368 Saginaw, MI •48604-9780 t8.0423 • Fax 989.752.4444 4-MF a Towers See spec page CBT for complete information Primary regulators are used to step down the CO2 or nitrogen pressure from the main source. A tank mount CO2 primary regulator attaches directly to the CO tank. A bulk or in -line CO2 primary regulator is used to splice into a C62 line when the CO2 tank is shared by more than one system. A tank mount nitrogen primary regulator is used with pre -blended nitrogen and CO2 or pure nitrogen gas. Each primary regulator kit includes 50 feet of nylon braided hose. MODEL DESCRIPTION WGT PRK-TC Tank mount CO2 primary regulator kit 15# PRK-BC Bulk CO2 primary regulator kit 15# PRK-TN Tank mount nitrogen primary regulator kit 15# The REG-0O2-LP1 secondary regulator kit is normally mounted inside the direct draw cooler and connects to the gas line coming from the externally mounted primary regulator. For installations with more than one keg on tap, also order the appropriate manifold kit(s). When no external source of CO2 is available, a 5 pound CO2 cylinder may be stored inside the cooler, which will require the REG-0O2-HP regulator. A manifold kit will also be required if there is more than one keg on tap. MODEL DESCRIPTION WGT REG-0O2-LP1 Secondary regulator kit 7# REG-0O2-HP Primary regulator kit for use with 5# 7# CO2 tank MAN2 Two product manifold kit 2# MAN3 Three product manifold kit 3# MAN4 Four product manifold kit 4# MAN5 Five product manifold kit 5# MANE Six product manifold kit 6# MODEL DESCRIPTION Aj 03004240 1/2" ID black drain line, per foot N/A 05000400 5/16" ID red vinyl air line, per foot N/A 05000386 1/4" ID nylon braided air line, per foot N/A 05001066 Sanke keg tap, stainless steel probe 2# 05001026 Sanke keg tap, low profile 2# 05002019 U system keg coupler w/ss probe for 2# Guinness and Harp 05000368 Lock for beer faucet 2# 05000636 5# CO2 tank (unfilled) 15# LCK Line cleaning kit 06007084 Drain bottle Printed in USA Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 24 Glastender BT-4-SS Item #19 Q&Ztffi&Xo A family company manufacturing in the USA www.glastender.com NOTE: Faucet handles not included. Intertek 4004503 Conforms to NSF/ANSI STD 18 9 BT-S-SSR with optional Rinser Faucet Extension Project: AlA# Item #: Qty: SlS# Model #: BT - Size: Stainless Steel Specify the number of finished as: faucets from 4, 5, 6, 8, 10, 12 SS = Grainline MF = Mirror PB = Brass Standard Features • All stainless steel construction • Integral surface mount drain pan with lift -out perforated insert • 1/4" shanks with 3/16" restriction lines • Available in grainline finish, mirror finish, or brass finish* (*NOTE: Brass finish towers provided with mirror finish drain pan and brass finish perforated insert) • Available with insulated cold plate assembly for recirculating system • Available in 4, 5, 6, 8, 10, and 12 faucet sizes • All models include all stainless steel faucets and shanks • Eco friendly foamed -in -place insulated column for extra rigidity. Eco friendly foamed -in -place insulation has zero impact on global warming or ozone depletion. • Unique internal support system for solid mounting • Base plate serves as template for hole cutting • Available with rinser faucet extension to the left or right of the drain pan. Specify RFE accessory. To view cleaning and care instructions, please visit: https://www.glastender.com/PDF/F-423-011_ss_clean care.pdf Specifications Drains NOTE: Rinser faucets are not intended for use with towers • Drain pan models - 1/2" tailpiece mounted to a refrigerator due to risk of water line freeze up. Materials 20 gauge stainless steel parts include: head, column, drain pan, and perforated inserts 16 gauge galvanized steel parts include: subsurface head stiffener and base plate 11 gauge stainless steel parts include: inner column base and top plate and tower head mounting plate Shank Sizes • 1/4" I.D. with 3/16" fittings Rinser Faucet (optional) • Accepts 3/8" cold water lead 30 psi water pressure regulator included Rinser Faucet Installation Notes • Important: Unit must be installed in 03012383 Rinser Faucet Assembly conformance with applicable federal, state, and local plumbing codes, including adequate backflow when required. • Must install backflow prevention device •�� ,N conforming to ANSI/ASSE 1022 or ANSI/ ASSE 1024 to meet plumbing code (not Intertek included). 4004503 Conforms to NSF/ANSI STD 372 • Install in -line water regulator (included). • A separate shut-off valve is recommended (not included). Glastender, Inc. • 5400 North Michigan Road • Saginaw, Ml - 48604-9780 Approval/Notes: 989.752.4275 - 800.748.0423 • Fax 989.752.4444 www.glastender.com Specifications subject to change without notice. For current specifications please visit our website. Printed in USA BT Rev. 09-20-21 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 25 Glastender BT-4-SS Item #19 Tee Towers Dimensional Information NOTE: Faucet handles not included. 1/8" 512" 12- f 1 18" 1 1 /2" 12" DRAIN BT SIDE ELEVATION 7/8" 7/8" 1-1/4" BT -RF FRONT ELEVATION E 12" ° BT -RF PLAN VIEW COLUMNSINGLE • - FAUCETS 4 5 6 "A" WIDTH 14" 17" 20" DOUBLE COLUMNTOWER FAUCETS 8 10 12 "B" WIDTH 26" 32" 38" "C" WIDTH 12" 15" 18" Z TOWERTEE COLUMNSINGLE FAUCETS 4 5 6 "D" WIDTH 14" 17" 20" "E" WIDTH 19" 22" 25" DOUBLE COLUMN FAUCETS 8 10 12 "F" WIDTH 26" 32„ 38" "G" WIDTH 31" 37" 43" "H" WIDTH 12" 15" 18" 5-1/8" BT -RF SIDE ELEVATION 18" 12-1 /2" 1/2" DRAIN 12" o 5400 North Michigan Road • Saginaw, MI.48604-9780 r 989.752.4275-800.748.0423 • Fax 989.752.4444 ene ® www.glastender.com 5" 1 11-7/8" 1-1/4" BT FRONT ELEVATION BT FRONT ELEVATION t 4-7/8" 11-7/8" A 1-1/4" BT -RF FRONT ELEVATION Printed in USA Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 26 True Mfg. - General Foodservice TUC-24 F-H C TRUE MANUFACTURING CO., INC U.S.A. FOODSERVICE DIVISION 2001 East Terra Lane • O'Fallon, Missouri 63366-4434 a (636)240-2400 Fax (636)272-2408 • Toll Free (800)325-6152 • Intl Fax# (001)636-272-7546 Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com Model: TUC-24F-HC r"07 ROUGH -IN DATA C•r•®®Nunn GCC[9® ®QCGCG�t•@r'CC� Project Name: Location: Item #: Model # Item #20 AIA # Qty: s/s # / True's undercounter units are designed with enduring quality that protects your long term investment. / Designed using the highest quality materials and components to provide the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today's food service marketplace. / Factory engineered, self- contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). All stainless steel front, top and ends. Corrosion resistant GalFan coated steel back. 1 Interior -attractive, NSF approved, clear coated aluminum liner. Stainless steel floor with coved corners. / Heavy duty PVC coated gray wire shelves. / Automatic defrost system time - initiated, time -terminated. 1 Foamed -in -place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Specifications subject to change without notice. Chart dimensions rounded up to the nearest''/8" (millimeters rounded up to next whole number). Cabinet Dimensions Cord Crated (inches) Length Weight (mm) NEMA (total ft.) (Ibs.) W Dt H Model Doors Shelves HP Voltage Amps Config. (total m) (kg) TUC-24F-HC 1 2 24 243/a 315/8 '/a 115/60/1 2.3 5-15P 7 165 610 627 802 '/a 230-240/50/1 1.6 1 ♦ 1 2.13 1 75 t Depth does not include 1" (26 mm) for rear bumpers. ♦ Plug type varies by country. APPROVALS: AVAILABLEAT.• /NNOVAT/ON U q O THE usa C 4/20 Printed in U.S.A. Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 27 True Mfg. - General Foodservice TUC-24F-HC Item #20 Model: TUC-24F-HC DESIGN • True's commitment to using the highest quality materials and oversized refrigeration systems provides the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today's food service marketplace. REFRIGERATION SYSTEM • Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydro carbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). • High capacity, factory balanced refrigeration system that maintains -10°F (-23.3°C) temperatures. Ideal for both frozen foods and ice cream. • State of the art, electronically commutated evaporator and condenser fan motors. ECM motors operate at higher peak efficiencies and move a more consistent volume of air which produces less heat, reduces energy consumption and provides greater motor reliability. • Condensing unit access in back of cabinet, slides out for easy maintenance. • Automatic defrost system time -initiated, time -terminated. ri7 , ,k1 l%M1yJfA 24" [610] FRONT VIEW CABINET CONSTRUCTION • Exterior - stainless steel front, top and ends. Corrosion resistant GalFan coated steel back. • Interior - attractive, NSF approved, clear coated aluminum liner. Stainless steel floor with coved corners. • Insulation - entire cabinet structure and solid door are foamed -in -place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). • Four (4) stationary castors. 315/a" (804 mm) work surface height. Two (2) front leg levelers included with unit for alternate use. DOOR • Stainless steel exterior with clear coated aluminum liner to match cabinet interior. • Door fitted with 12" (305 mm) long recessed handle that is foamed -in -place with a sheet metal interlock to ensure permanent attachment. • Positive seal self -closing door with 90' stay open feature. Door swings within cabinet dimensions. • Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. 2511/16" [652.621 24 1 [627] SIDE VIEW 31 17/32" [802] 9/32" [6.88] r� 0 SHELVING • Two (2) adjustable, heavy duty PVC coated wire shelves 201 x 13 7/s "D (508 mm x 353 mm). Four (4) chrome plated shelf clips included per shelf. • Shelf support pilasters made of same material as cabinet interior; shelves are adjustable on 1/2" (13 mm) increments. MODEL FEATURES • Evaporator is epoxy coated to eliminate the potential of corrosion. • NSF/ANSI Standard 7 compliant for open food product. ELECTRICAL • Unit completely pre -wired at factory and ready for final connection to a 115/60/1 phase,15 amp dedicated outlet. Cord and plug set included. 115/60/1 NEMA-5-15R OPTIONAL FEATURES/ACCESSORIES Upcharge and lead times may apply. ❑ 230 - 240V / 50 Hz. ❑ Heavy duty 16 gauge tops ❑ Exterior rectangular digital temperature display (factory installed) ❑ Left hinge available ❑ SPEC3 package TOP VIEW 32' 31 METRIC DIMENSIONS ROUNDED TO THE NEAREST WHOLE MILLIMETER R PARTS+LABOR COMPRESSOR �L TUC'24F-HC TFQY013 lh Model 3D Back Elevation Right Plan TFQYOIE ` TFQY015 TFQYOtP Lord Fletchers -Upstairs bar -Spring Park MN Boelter LLC Page: 28 r_ Lord Fletchers -Upstairs bar -Spring Park MN Boelter LLC Page: 28 r_ Hoshizaki R2A-FG R2A=FG r Two Section Full Glass Door Refrigerator WxDxH 55" x 34.5" x 79.5" 'with 4" casters Bw�� ® Eta c M ~� o Intertek Intertek Dimensions / Capacity Interior Storage Capacity (CF) (AHAM) Overall Width x Depth Height (including 4" casters) Door Opening Width x Height Depth with Door Open at 900 Adjustable Shelves Shelf Dimensions (W x D) Adjustable Center Shelves Center Shelf Dimensions (WxD) Crated Shipping Weight Crated Length x Width x Height Electrical / Refrigeration Voltage HACR Breaker Electrical Connection (NEMA) Voltage Range Ambient Temp. Range Control Setpoint Range Amperage Energy Consumption (kWh/day) t@ASHRAE Heat Rejection (BTU/Hr.) @NSF Approx. Nominal Compres. BTU/HR (HP) Refrigerant / Charge Amount (oz) Options CSOY3 *I[A NAp L Two Section R2A-FG 50.37 W 55" x 34.5" 79.5" 21.75" x 59.25" 57" 6 21.25" x 26" 3 6" x 17.8" 570 Ibs 58" x 37.5" x 81 " Two Section R2A-FG 115/60/1 15.0 Amps 5-15P 104-126 45° to 100'F 31' to 52'F 8 5.05 978 1545(1/2HP) R290 / (4.9 oz) ❑ Additional epoxy shelves ❑ Tray/Pan slides ❑ Stainless steel shelves ❑ 6" Adjustable legs ❑ Additional center shelves ❑ Condensate pan (HS-5462) Lord Fletchers'VU airs bar -Spring Park MN ^ ^ Warranty * 3 Year - parts and Labor on entire machine. 5 Year - Parts on Compressor Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for warranty in other countries. Boelter LLC Item #21 iu �u STEELHEART } Item #: Project: 4ty: AIA#: Features ncH-ru 08/02/19 Item # 13510 ► Maximum interior storage capacity with smallest external footprint ► Stainless steel interior with stainless steel exterior front, sides and top ► Unique ducted air distribution system • Energy efficient interior LED light • Environmentally friendly R290 hydrocarbon refrigerant • Solid state digital controller with temperature alarms and LED display (Fahrenheit or Celsius) • Cabinet and doors are insulated with 2-3/8" of CFC free, foamed in place polyurethane • Glass doors are energy efficient multi pane, argon filled with locks • Exclusive stepped door design to protect recessed door gasket • Self -closing doors with stay open feature • One piece, full length, chrome handle • Sturdy 8 gauge stainless steel hinge plate with welded hinge pin • Extruded aluminum flush mount door handle • Field reversible doors • Evaporator coils are epoxy electrocoated (E-Coat) to help fight corrosion • Energy efficient automatic hot gas condensate evaporator • Top mount refrigeration comes standard with a condenser filter • Refrigerant flow is controlled with thermostatic expansion valve • Stainless steel shelf supports • (3) epoxy coated wire shelves are standard • Center shelves for added storage capacity • Standard with 4" casters (two with brakes) • Stackable (two units high) to conserve warehouse floor space • 10 ft. cord and plug Hoshizaki reserves the right to change specifications without notice. Page: 29 Hoshizaki R2A-FG • R2A=FG Two Section Full Glass Door Refrigerator FRONT VIEW 55" PLAN VIEW Cabinet Construction 79.5" 3.63" 55" Item #21 STEELHEART' .. SIDE VIEW 59.25" 79.5" nLH-ru 08/02/19 Item # 13510 The exterior cabinet front, sides, and top are constructed of high quality stainless steel. The exterior back, and bottom are constructed of coated steel. The cabinet interior is constructed of stainless steel with a unique ducted air flow system. Three (3) heavy duty epoxy coated shelves per section are standard. Mounted on stainless steel pilasters shelves are adjustable in 1" increments. Cabinet walls and doors are insulated with 2-3/8" of environmentally friendly, CFC free, foamed in place polyurethane. Two interior LED light strips are mounted vertically and controlled by a separate switch on the controller. 4" polyolefin, casters (two with brakes) are standard. Door Construction Glass doors are constructed of high grade silver anodized aluminum with a full length chrome handle. Door glass is energy efficient multi pane, argon filled with locks. The door hinges are all metal and include an adjustable torsion spring closure that will not wear out like traditional cam -lift hinges. Hinge plates are constructed of heavy duty stainless steel. Doors stay open at 90° and are self -closing at 75°. Snap -in magnetic door gaskets are durable and easily removed for cleaning. Door hinging is field reversible. Refrigeration System The high efficiency refrigeration system is self-contained with an epoxy electrocoated (E-Coat) evaporator for extended life. Top mounted refrigeration system is easily accessible for service and includes a condenser filter with easy access from the top of the unit. The refrigeration system components are assembled on a high density expanded polypropylene platform that is removable from the main unit. A unique ducted airflow system achieves uniform air distribution within the cabinet to eliminate hot spots. Condensate removal is accomplished with atop mounted energy efficient non -electric evaporation system. A thermostatic expansion valve JXV) controls the flow of environmentally friendly R290 refrigerant through the evaporator. Refrigeration system utilizes a time initiated off cycle defrost to eliminate any ice on the evaporator coil. Solid state digital controls monitor the operation and performance of the refrigeration system. The controls also provide visual high and low temperature and high and low voltage alarms. A LED display shows the cabinet temperature and is adjustable to Fahrenheit or Celsius. 115 volt units are equipped with a ten foot cord and plug (20.0 amps or less). Lord Fletc1 ers - Upstairs bar - Spring Park MN Boelter LLC Page: 30 T&S Brass B-1110 Item #30 T&S BRASS AND BRONZE WORKS, INC. Model No. 1W 2 Saddleback Cove / P.O. Box 1088 B-1110 Travelers Rest, SC 29690 Item No. Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com ThisSpace for Architect/Engineer Approval El JbName Date ADA Compliant Model Specified Quantity 8 5/8" Customer/Wholesaler [ 219mm ] Contractor Architect/Engineer 6 1/2" 165mm0 2" [51mm] Polished Chrome Plated Escutcheon Swivel Joint Quarter -Turn Eterna Cartridges w/ Spring Converts to Rigid Checks & Lever Handles w/ 014200-45 w/ Color Coded Indexes 6" Lock Washer 153mm� (Included) 059X-A22 6" Swing Nozzle w/ 2.2 GPM Aerator ® _ 6 3/16" 1" 0156mm� 3 5/16" [ 26mm ] 3 1 /16" [ 84mm ] [ 77mm ] Mounting Surtace 1/4" [ 6mm ] 4" � 25mm � (2)150A Optional Tailpieces & Maximum [102mm� 1/2" NPT Male Inlets Nuts For 1/4" NPT Thickness Connection (Included) Rough -In Requirement: (2)01" [25mm] Mounting Holes Product Specifications: Product Compliance: 4" Deck Mount Workboard Faucet, Quarter -Turn Eterna Cartridges w/ Spring ASME Al12.18.1 / CSA 13125.1 Checks, Lever Handles, 6" Swing Nozzle, 2.2 GPM Aerator & 1/2" NPT Male NSF 61 - Section 9 Inlets NSF 372 (Low Lead Content) ANSI A117.1 (ADA) Drawn: DMH Checked: JRM A roved: JHB Date: 06/01/16 1 Scale: 1:4 Sheet: 1 of 2 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 31 T&S Brass B-1110 Item #30 0 T&S BRASS AND BRONZE WORKS, INC. Model No. 1W 2 Saddleback Cove / P.O. Box 1088 B-1110 Travelers Rest, SC 29690 Item No. Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com ITEM I SALES NO. DESCRIPTION 1 B-0199-01 2.2 GPM Aerator, 55/64"-27 UN Female 2 059X-A22 6" Swing Nozzle w/ 2.2 GPM Aerator 3 019360-40 Swivel Nut (New Style) 4 009538-45 Swivel Washer 5 011429-45 Swivel Sleeves (2) 6 001074-45 O-Ring 7 014200-45 Star Washer, Anti -Rotation 8 019363-45 Blue Button Index, Press -in 9 000925-45 Lab Handle Screw 10 019361-45 Lever Handle (New Style) 11 019382-40 Quarter -Turn New Style Eterna Cartridge w/ Integral Spring Check, LTC 12 019376-40 Escutcheon Lock Nut 13 019374-40 B-1110 Eterna Workboard Escutcheon 14 000999-45 Brass Lock Washer 15 002954-45 Shank Lock Nut 16 150A 1/4" NPT Tailpiece & Nut 17 019383-40 Quarter -Turn New Style Eterna Cartridge w/ Integral Spring Check, RTC 18 019364-45 Red Button Index, Press -in Product Specifications: 4" Deck Mount Workboard Faucet, Quarter -Turn Eterna Cartridges w/ Spring Checks, Lever Handles, 6" Swing Nozzle, 2.2 GPM Aerator & 1/2" NPT Male Inlets nce: ASME Al12.18.1 / CSA 6125.1 NSF 61 - Section 9 NSF 372 (Low Lead Content) ANSI All 17.1 (ADA) IDrawn: DMH IChecked: JRM jApproved: JHB IDate: 06/01/16 (Scale: NTS Sheet: 2 of 2I Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 32 T&S Brass B-0113-CR-BVB-A Item #30 T&S BRASS AND BRONZE WORKS, INC. Model No. 1W 2 Saddleback Cove / P.O. Box 1088 B-0113-CR-BVB-A Travelers Rest, SC 29690 Item No. Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com Easyl nstall Lock Nut & Bushing- 2 5/16" 58mm Q 44" Flexible Stainless Steel Hose w/ Spring & Spray Valve Items Not Shown For Clarity Finger Hook [c7E:31�►1i1�'i�• ��:� B-0107-A Spray Valve w/ 2.2 GPM Aerator B-0970-FEZ Vacuum Breaker Quarter -Turn Cerama Cartridges w/ Check Valves & Lever Handles w/ Color Coded Indexes This Space for Architect/Engineer Approval Job Name Date Model Specified Quantity Customer/Wholesaler Contractor Architect/Engineer 16 3/4" [ 426mm ] B-0109-01 6" Wall Bracket 14" [ 356mm ] 46" �1169mm� Mounting r r Surface 2 1/4" 1 3/8" [57mm] Q35mm —18" Flexible Deck Maximum Stainless Steel Flange Supply Hoses Thickness Compression Fittings for 5/8" O.D. Copper Tubing Rough -In Requirement: (Remove Compression Nut 0 1 1/2" [0 38mm] Hole for 1/2" NPSM Male) Product Specifications: Product Compliance: Single Deck Mount Vertical Glass Filler, Quarter -Turn Cerama Cartridges NSIF 61A-112 ton gCSA 6125.1 w/ Check Valves, Easylnstall Vacuum Breaker, Flexible Supply Hoses, 24" NSF 372 (Low Lead Content) Riser, 44" Flexible Stainless Steel Hose, Spray Valve w/ 2.2 GPM Aerator, EPAct 2005 Non -Compliant (PRSV) 6" Wall Bracket & Flexible Stainless Steel Supply Hoses CSA B64.8 (VB) Product Not Designed/Intended for Commercial Warewashing in North America Drawn: JBC Checked: JRM Approved: JHB Date: 02/29/16 Scale: 1:10 Sheet: 1 of 2 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 33 T&S Brass B-0113-CR-BVB-A Item #30 T&S BRASS AND BRONZE WORKS, INC. Model No. 1W 2 Saddleback Cove / P.O. Box 1088 B-0113-CR-BVB-A Travelers Rest, SC 29690 Item No. Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 - Fax: 864-834-3518 • www.tsbrass.com ITEM NO. SALES NO. DESCRIPTION 1 B-0107-A 2.2 GPM Aerated Spray Valve 7 2 010476-45 #27 Washer 2 3 000907-45 Spray Valve Hold Down Ring 8 4 002987-40 Grip Handle 5 001014-45 Washer, B-0100 Hose Barrel 6 6 B-0044-H2A 44" Flexible Stainless Steel He Less Handle 9 7 000888-45 Easylnstall Overhead Spring 8 000821-40 Spring Body 10 9 B-0109-01 6" Wall Support 10 004R Finger Hook 5 11 000372-40 3/8" NPT x 24" Riser 4 12 B-0970-FEZ Easylnstall Vacuum Breaker 11 13 014200-45 Star Washer, Anti -Rotation 3 2 24 14 23 rfi 14 012447-25 Quarter -Turn Cerama Cartridge LTC w/ Check Valve, Handle, Index & Screw 15 012395-25 Quarter -Turn Cerama Cartridge LTC w/ Check Valve 16 001660-45 Blue Index-CW 17 002290-45 Lock Washer 18 000965-45 Lock Nut 19 012436-45 Flexible Connector Hose 20 012394-25 Quarter -Turn Cerama Cartridge RTC w/ Check Valve 21 001638-45 Lever Handle 22 001661-45 Red Index-HW 23 000922-45 Lever Handle Screw 24 012446-25 Quarter -Turn Cerama Cartridge RTC w/ Check Valve, Handle, Index & Screw Product Specifications: Product Compliance: Single Deck Mount Vertical Glass Filler, Quarter -Turn Cerama Cartridges ASME Al12.18.1 / CSA B125.1 Install Vacuum Breaker, Flexible Supply Hoses, 24" NSF 61 - Section 9 w/ Check Valves, Eas Y pP Y NSF 372 (Low Lead Content) Riser, 44" Flexible Stainless Steel Hose, Spray Valve w/ 2.2 GPM Aerator, EPAct 2005 Non -Compliant (PRSV) 6" Wall Bracket & Flexible Stainless Steel Supply Hoses CSA 664.8 (VB) Product Not Designed/Intended for JHB IDate: Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 34 Hoshizaki SR60A-24MD2 r Mega Top 60" Prep Refrigerator with One Door and Two Drawers WxDxH 60" x 34" x 44.25" 'with 6" casters .. `o Intertek Intertek Dimensions / Capacity Interior Storage Capacity (CF) Interior Storage Capacity (CF) (AHAM) Overall Width x Depth (including 1" bumper) Height (including 6" casters) Depth with Cutting Board Installed Door Opening Width x Height Depth with Drawer Fully Open (including 1" bumper) Depth with Door Open at 900 (including 1" bumper) Pan Capacity (# of 1/6 size x 4" deep) Adjustable Shelves / Shelf Dimensions (W x D) Crated Shipping Weight Crated Length x Width x Height Electrical / Refrigeration Voltage HACR Breaker Electrical Connection (NEMA) Voltage Range Ambient Temp. Range Control Setpoint Range Amperage Energy Consumption (kWh/day) @NSF Heat Rejection (BTU/Hr.) @NSF Approx. Nominal Compres. BTU/HR (HP) Refrigerant / Charge Amount (oz) SR60A-24MD2 Item #31 STEELHEART: gjoRY A rts 8 La F YR NATURAL eWdene Two -Section SR60A-24MD2 17.55 ft' 15.38 ft' 60" x 35" 44.25" 37.3" 25.5" x 23" 52" 58.5" 24 1 / 27.25" x 16" 420 lbs. 61.75" x 36" x 46" Two -Section SR60A-24MD2 115/60/1 15.0 Amps 5-15PC 104-126 45° to 100°F 32' to 527 6 4.3 613 1360 (1/3HP) R290 (3.1 oz) Options Warranty ❑ 2.25" Casters ❑ Stainless steel back * 3 Year - parts and Labor on ❑ 4" Casters ❑ Overshelves entire machine. 5 Year - Parts on Compressor ❑ Stainless steel lift off covers ❑ Drawer divider bars Valid in United States, Canada, Puerto ❑ Additional epoxy shelves ❑ Rail adapter bars Rico and U.S. Territories. Contact ❑ Composite cutting board (HS-5268) ❑ Stainless steel shelves factory for warranty in other countries. Item #: Project: Qty: AIA#: Features onuuM-LYIVI VG 01/28/20 Item # 13481 ► Engineered to maintain NSF-7 temperatures in 100OF ambient. (Certified to NSF-7 temperatures in 86OF ambient.) No. Stainless steel exterior front, sides and top with stainless steel interior sides, back, and floor ► Front breathing air flow design • Environmentally friendly R290 hydrocarbon refrigerant • Cabinet and doors are insulated with 2" CFC free, foamed in place polyurethane • Innovative air distribution system distributes air evenly to maintain product temperature • Provided with a full complement of polycarbonate plastic 1/6th size pans, 4" deep and adapter bars • Rails will also accept 6" deep pans for 50% more pan volume • 60" x 10" x 1/2" thick white polyethylene cutting board is standard • Drawer module frames, acetal rollers, and drawer stops are formed of heavy duty stainless steel all welded construction and securely fastened in the cabinet • Top drawers will accommodate (1) 12 x 20 full size pan and (2) t/4 size pans. Bottom drawer will accommodate (1) full size pan • Extruded aluminum flush mount drawer handle • Magnetic door gasket is easily removable for cleaning • Removable stainless steel prep guard simplifies cleanup from accidental rail pan drips and spills. • E-coated evaporator coil • Standard with 6" stem casters (two with brakes) • 10 ft. cord and plug Note: Made to order. Allow 4-6 weeks. Door or drawer can be located in any section of the cabinet. Location must be indicated at time of ordering. Hoshizaki reserves the right to change specifications without notice. Page: 35 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Hoshizaki SR60A-24MD2 Item #31 _i 01 /28/20 f STEELHEART� Item #13481 SR60A-24MD2 ❑_., . Mega Top 60" Prep Refrigerator with One Door and Two Drawers FRONT VIEW SIDE VIEW PLAN VIEW 55" (24) -1/6 Pan Capac 60" x 10" x 1/2" Think Cutting Boar T 6" 60" Cabinet Construction The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. Cabinet is provided with a stainless steel top enclosure and an easily removable stainless steel insulated lift -up cover. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are stainless steel with an ABS ceiling and stainless steel floor. Cabinet walls and drawers are insulated with 2" CFC free, foamed in place polyurethane. 6" polyolefin, stem casters (two with brakes) are standard. Preparation tables are supplied with a full length, 10" deep x 1/2" thick N.S.F. approved white polyethylene cutting board. Drawer Construction Drawer fronts are constructed of high grade stainless steel inside with stainless steel interior liners and are insulated with 2" CFC, foamed in place polyurethane. The bottom drawers will accommodate 6" deep pans. Full size pans in the top drawer can be oriented longways from front to back or left to right. The top drawer will accommodate 4" deep pans with either orientation. The top drawer will also accommodate 6" deep full-size pans when oriented longways from left to right and provide capacity for (2) 1/4 size pans 4" deep in the rear of the drawer. HS-5433 divider bar is recommended for this configuration. The drawer slides are constructed of heavy duty 16-gauge stainless steel and durable acetal rollers with stainless steel ball bearings to prevent metal to metal contact. The drawer slides have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and closings without showing significant wear. Door Construction Doors are constructed of high grade stainless steel exterior with an ABS interior liner and are insulated with 2" CFC free, foamed in place polyurethane. Hoshizaki's exclusive "stepped" design protects the gasket while product is removed from the cabinet. Spring assisted self -closing doors are equipped with a stay open feature past 90 degrees. Field reversible door hinging is standard. Doors & drawers are provided with a one piece, extruded aluminum, flush mount handle. Snap -in magnetic door gaskets are durable and easily removed for cleaning Refrigeration System Front breathing refrigeration system allows unit to be built into any enclosure with zero side or rear clearance. The high efficiency refrigeration system is self-contained with an E-coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non -electric evaporation system. A capillary tube controls the flow of environmentally friendly R290 refrigerant through the evaporator. Unit uses a heated, time initiated defrost to eliminate any ice on the evaporator coil. An innovative air distribution system distributes air evenly around the pans. Engineered to maintain NSF-7 temperatures in 100°F ambient. (Certified to NSF-7 temperatures in 86°F ambient.) Preparation tables are supplied with a full complement of N.S.F. approved plastic 1/6 size pans, 4" deep and stainless steel adapter bars. Units will also accommodate 6" deep pans. Pans are located 1.5" below the top to keep food product within easy reach. 115 volt units are equipped with a ten foot cord and NEMA rated plug (20.0 amps or less). Lord Fletchers -Upstairs bar - Spring Park MN Boelter LLC Page: 36 WELLS MANUFACTURING ITEM NO. Item #32 RWN-1, RWN-2, RWN-3 BUILT-IN NARROW DRAWER WARMERS Specifications Overall Dimensions: Inches MM Width 20 1 /4 514 Depth 21 1 /2 546 Height (ind. 4" legs 8 splashguard) RWN-1 series 14 7/8 378 RWN-2 series 25 635 Height (no legs) RWN-3 series 31 1 /8 791 Temperature Range: Fahrenheit Celsius RWN series 900 to 2100 1 320 to 990 Pre -Heat Time to 175' F: 120V & 240V 208V RW series 15 minutes 22 minutes Typical Capacity: Dinner Rolls Individual drawer Appox. 8 doz. Weights: Lbs. KG RWN-1 series: Installed 59 27 Shipping 71 32 RWN-2 series: Installed 106 48 Shipping 121 55 RWN-3 series: Installed 147 67 Shipping 183 83 Wells Narrow Drawer Warmers can keep a variety of foods hot and ready to serve. Their narrow width saves valuable space, yet the drawers accept all standard 12" x 20" pans up to 6" deep. All Wells warmers come with individual controls on each drawer for temperature and humidity, allowing food to be hot and crispy in one drawer, warm and moist in another. Features • Narrow width saves space while accommodating standard 12"x20" pans. • Exclusive self -latching mechanism provides easy, one -touch, secure closure. • Individual thermostatic temperature control on each drawer gives these warmers maximum versatility. • Durable stainless steel tracks and bearings provide smooth, trouble -free operation. • Adjustable front vent on each drawer allows for humidity control. • A stainless steel pan is provided with each drawer warmer and is capable of holding a standard 12" x 20" pan. • Fully insulated for maximum efficiency. • Models with optional built-in thermometer (T) are NSF approved for potentially hazardous foods. • The RWN series Drawer Warmers are Underwriters Laboratories, Inc. LISTED and meet the NSF International and Canadian standards. • A one-year warranty against defects covers parts and labor. Accessories / Options Stainless Steel Replacement Pan, for all narrow drawer warmers, 22228 Optional Built-in Thermometer (T), for individual drawers, contact factory Caster Kit, 10" high casters, set of four, with two front brakes, 21034 Caster Kit, 3 1 /2" high casters, set of four, all with brakes, 22201 Leg Kit, 6", set of four, metal, 20576 107 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 37 Wells RWN-2 Item #32 S OC S LISTED STDA LISTED E6070 E6070 DIMENSIONS: 20 1 /4 (514) 10 7/8 Qo (276) 4 (102) MODEL RWN-1, RWNT-1 NARROW DRAWER WARMERS INCH (MM) 19 5/8 26 5/16 (498) (668) [i POWER j SUPPLY CORD RWN-1, RWNT-1 ELECTRICAL SPECIFICATIONS: RWN-1 120 450 3.8 SINGLE NEMA 5-15P RWN-1 208 338 1.6 SINGLE NEMA 6-15P RWN-1 240 450 1.9 SINGLE NEMA 6-15P * RWNT-1 models are provided with a thermometer and have the same electrical specifications as the standard models. NOTE: Specifications are subject to change without notice. 02/02 • REV(F) • PART NO. 49339 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 38 Wells RWN-2 WELLS MANUFACTURING & O C LISTED STDA E6070 E6070 DIMENSIONS: 25 (635) 20 1 /4 (514) LM11 -T 21 (533) H 4 (102) Item #32 MODEL RWN-2, RWNT-2 NARROW DRAWER WARMERS INCH (MM) 19 5/8 26 5/16 (498) (668) RWN-2, RWNT-2 ELECTRICAL SPECIFICATIONS: RWN-2 120 900 7.5 SINGLE NEMA 5-15P RWN-2 208 676 3.3 SINGLE NEMA 6-15P RWN-2 240 900 3.8 SINGLE NEMA 6-15P * RWNT-2 models are provided with a thermometer and have the same electrical specifications as the standard models. NOTE: Specifications are subject to change without notice. 02/02 • REV(F) • PART NO.49339 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 39 Wells RWN-2 WELLS MANUFACTURING S NSF CS LISTED STDA E6070 E6070 DIMENSIONS: INCH (M M) 20 114 (514) �mI LEG/CASTER KI1 (OPTIONAL) SEE FRONT FOR PART NOS. Item #32 MODEL RWN-3, RWNT-3 NARROW DRAWER WARMERS 19 5/8 26 5/16 (498) (668) RWN-3, RWNT-3 ELECTRICAL SPECIFICATIONS: 1 -- I SUPPLY CORD RWN-3 120 1350 11.3 SINGLE NEMA 5-15P RWN-3 208 1014 4.9 SINGLE NEMA 6-15P RWN-3 240 1350 5.6 SINGLE NEMA 6-15P * RWNT-3 models are provided with a thermometer and have the same electrical specifications as the standard models. NOTE: Specifications are subject to change without notice. WELLS MANUFACTURING COMPANY 2 CIRCLE, BOX 280, VERDI, 89439 U.S.A. Q �� USAA P PHONE: (77575)689-5700• FAX: (77775)689-5972 FOR ORDERS ONLY: (888) 356-5362 • FAX: (800) 356-5142 www'wellsbloomfield.com 0 2002 WELLS MANUFACTURING • PRINTED IN THE U.S.A. 02/02 • REV(F) - PART NO. 37116 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 40 Vollrath 74110110 Item #36 Outperform every day." DESCRIPTION MirageO Induction Countertop Rethermalizers use innovative induction technology to run dry (without a water bath), improve food quality and minimize food waste; while using a fraction of the energy. They are shipped complete with an induction -ready inset and slotted hinged cover. PERFORMANCE CRITERIA The MirageO Induction Countertop Rethermalizer are designed to take a container of cooked food from a chilled state (below 40.00 F [4.4° Cj) through the HACCP "danger zone" of 1650 F (73.90 C) in less than 90 minutes. The performance standard is measured using the NSF mixture chilled to 35° F (1.7° C). The electric unit will raise the temperature of this product above 165° F (73.90 C) in less than 90 minutes. The temperature will be maintained above 1500 F (65.6° C) when the food product and pan or inset are used with a standard pan or inset cover, and the food product is stirred regularly. AGENCY LISTINGS C@us NSF. FCC This device complies with Part 18 FCC Rules. LISTED Cover is not NSF. Due to continued product improvement, please consult www.voilrath.com for current product specifications. VOL mwe �� Outperform every day.- ...........-1.- 1 ---- Lord Fletchers - Upstairs bar - Spring Park MN Project: Item Number: Quantity: ITEMS 7470110 7 Qt. Induction Rethermalizer, Natural (US/CAN) 7470140 7 Qt. Induction Rethermalizer, Red (US/CAN) 74110110 11 Qt. Induction Rethermalizer, Natural (US/CAN) 74110140 11 Qt. Induction Rethermalizer, Red (US/CAN) FEATURES • 800 watt 3D induction coil heats food evenly and efficiency. • Dry use. Heat is transferred directly to the induction -ready inset, which eliminates the need to monitor and refill water levels. • Sensors monitor the temperature at three points on the inset to activate the Stir Indicator LED which notifies the operator to stir the food to maintain temperature and quality. • Sensors reduce food waste and make clean-up easier by preventing food from burning in near -empty insets. • Advanced solid state controls with highly visible white LEDs include: temperature control in OF and °C; four presets - broth soups, creme soups, chili, mac and cheese; rethermalize mode; stirring indicator; and a locking function that prevents untrained operators from changing settings. • Maximum temperature setting of 190°F. • Includes cover — item 47488 for 7 Qt.or 47490 for 11 Qt., and inset— item 88184 for 7 Qt. or item 88204 for 11 Qt. Covers and insets are also sold separately. • Requires use of included Vollrath induction -ready inset. • Meets NSF4 Performance Requirements for rethermalization and hot food holding equipment. • 6' power cord plugs into any NEMA 5-15R 15 or 20 amp 120V receptacle. WARRANTY • All models shown come with Vollrath's standard warranty against defects in materials and workmanship. For full warranty details, please refer to www.Vollrath.com. CLEARANCE AND ENVIRONMENT REQUIREMENTS • Failure to use Vollrath induction -ready insets may damage the unit and will void the warranty. • All models require unrestricted intake and exhaust air ventilation for proper operation of the controls. The maximum intake temperature must not exceed 110OF (430C). Temperatures are measured in ambient air while all appliances in the kitchen are in operation. • Countertop models require a minimum clearance of 4 inches (10.2 cm) at the rear and 1 inch (2.5 cm) at the bottom. Approvals Date The Vollrath Company, L.L.C. 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A. Main Tel: 800.624.2051 or 920.457.4851 Main Fax: 800.752.5620 or 920.459.6573 Customer Service: 800.628.0830 Canada Customer Service: 800.695.8560 Boelter LLC Technical Services ec tservlcereps vollrathco.com Induction Products: 800.825.6036 Countertop Warming Products: 800.354.1970 All Other Products: 800.628.0832 Page: 41 eo C9 a c ea o' c� 0 c 0 CD 0 a CD 0• CD 0 N� CD Vollrath 74110110 Item #36 VOLLRATHO Outperform every day: www.vollrath.com The Vollrath Company, L.L.C. 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A. Main Tel: 800.624.2051 or 920.457.4851 Main Fax: 800.752.5620 or 920.459.6573 Customer Service: 800.628.0830 Canada Customer Service: 800.695.8560 Technical Services ec servicereps vollrathco.com Induction Products: 800.825.6036 Countertop Warming Products: 800.354.1970 All Other Products: 800.628.0832 ° 2018 The Vollrath Company L.L.C. Form Number L35920 11/5/18 Printed in USA Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 42 Vollrath 74110110 Item #36 Countertop Rethermalizers Ships with induction -ready inset and hinged cover Set temperature in F° or C° for soup, cream soup, mac & cheese, or chili REFERENCE OUR SERVING SYSTEMS & COMPONENTS CATALOG FOR DROP -IN STYLES KI ITEM # DESCRIPTION COLOR DIMENSIONS IN (CM) FREQUENCY VOLTAGE WATTS AMPS PLUG CASE LOT 7470110 7 qt induction rethermalizer Silver 11Y x 131 (30.3 x 34.2) 50/60hZ 120 800 6.7 5-15P 1 7470140 7 qt induction rethermalizer Red 11Ys x 13Y (30.3 x 34.2) 50/6OhZ 120 800 6.7 5-15P 1 74110110 11 qt induction rethermalizer Silver 13/ x 13% 135.3 x 34.2) 50/6OhZ 120 800 6.7 5-15P 1 74110140 11 qt induction rethermalizer Red 137A x 13Y (35.3 x 34.2) 50/6OhZ 120 800 6.7 5-15P 1 88184 7 qt induction inset 47488 Hinged inset cover, fits 7 qt inset 88204 11 qt induction inset 47490 Hinged Inset cover, fits 11 qt inset 88184NS' 71/4 qt nonstick induction inset 88184NS' 71/ qt nonstick induction inset 88204NS• 11 qt nonstick Induction inset 88204NS' 11 qt nonstick induction inset "Nonstick insets are made to order: call Vollrath for minimums and lead time. For 7 quart International models with 220-240V, change the fifth digit to "2" for Schuko, 3"for UK, '4"for China, or "5"for Australia (e.g., Schuko 7470110 to 7470210) For 11 quart International models with 220-24OV, change the sixth digit to "2"for Schuko, 3" for UK. "4" for China, or "5"for Australia (e.g., Schuko 74110110 to 74110210) NContemporary Hinged Inset Lids IMPROVED INSET COVER DESIGN Welded handle is permanently attached and stays secured to cover Handle serves as kickstand, keeping cover open for easy access to food No friction -fit tabs to lose Design of handle dissipates heat, keeping it cooler to the touch Fits most 7-quart and 11-quart insets Large opening for easy access ITEM # DESCRIPTION 47493 Hinged inset lid — 71A qt 47494 Hinged inset lid — 11 qt DROP -IN PRODUCTS ©REFERENCE OUR SERVING SYSTEMS & COMPONENTS CATALOG FOR DROP -IN STYLES. OVERALL DIAMETER: IN (CM) HEIGHT: IN (CM) CASE LOT 9 %� (25.3) 2'A (7) 1 114A (30) 23/4 (7) 1 KOOL-TOUCHID LADLES WITH HIGH TEMPERATURE JUST GOT COOLER • Kool-Touch' Handles are color safe up to 225°F (107.2°C) Fully functional to 350°F (176.6°C) • Insulated coating permanently bonded to utensil — will not slip or peel • Provides cool, comfortable grip See page 143-144 for product details. 56 Lord Fletchers - Upstairs bar - Spring Park MN Boelter LLC Page: 43