The URL can be used to link to this page

Permits - Permit# 25SP-00060 - 2450 Island Drive - 9/3/2025City of Spring Park / 4349 Warren Ave, Spring Park, MN 55384 PARK Phone:(952) 471-9051 Fax: (952) 471-9160 For Inspections: (952) 442-7520 Re-Window/Exterior Door (Commercial) 25SP-00060 Date Issued: 09/03/2025 Property Owner: DOCKSIDE APTS ON LK MTKA LLC Expiration Date: 03/02/2026 Mailing Address: 5290 VILLA WAY Job Site Address: 2450 ISLAND DRIVE, SPRING PARK, MN 55384 EDINA, MN 55436 Category: Commercial Miscellaneous Phone: Permit Type: Re-Window/Exterior Door (Commercial) Email: Valuation: $300,000.00 Description of Work: new 153 windows - same size openings Subdivision: Required Setbacks: Parcel ID: 1911723220066 Filing: Actual Setbacks: Lot: Block: Total Sq Ft: Contractors: Fee Items Amount Primary SATOREE DESIGN LLC (612) 695-9167 State Surcharge $ 150.00 Building SATOREE DESIGN LLC (612) 695-9167 Commercial Roof/Siding/Window/Door $ 2,692.00 Commercial R/S/W/D Plan Review $ 1,749.80 Total Fees: $ 4,591.80 NOTICE Signature of Applicant/Date Building Department Signature/Date 09/03/2025 MUST BE POSTED ON JOB SITE INSPECTION CARD AL—�� City of Spring Park SPRING PARK On Gake Minnetonka 4349 Warren Ave, Spring Park, MN 55384 POST THIS CARD IN A SAFE CONSPICUOUS LOCATION. PLEASE DO NOT REMOVE THIS NOTICE UNTIL ALL REQUIRED INSPECTIONS ARE MADE AND SIGNED OFF BY THE APPROPRIATE AUTHORITY AND THE BUILDING IS APPROVED FOR OCCUPANCY. STAMPED APPROVED PLANS MUST BE AVAILABLE ON THE JOBSITE. Re-Window/Exterior PERMIT NO.: 25SP-00060 PERMIT TYPE: Door (Commercial) ISSUED DATE: 09/03/2025 EXPIRATION DATE: 03/02/2026 1911723220 PROJECT ADDRESS: 2450 ISLAND DRIVE, SPRING PARK, MN 55384 PARCEL NO.: 066 OWNER: DOCKSIDE APTS ON LK MTKA LLC OWNER PHONE: CONTRACTOR: SATOREE DESIGN LLC CONTRACTOR PHONE: (612) 695-9167 APPLICANT: Satoree Kitchen & Bath - Carrie APPLICANT PHONE: (612) 695-9167 DESCRIPTION OF WORK: new 153 windows - same size openings CONSTRUCTION TYPEi OCCUPANT LOAD: DATE DATE INSPECTION INSP PASSED COMMENTS INSPECTION INSP PASSED COMMENTS Final/In-Progress Fire Approval: Date: Engineering Approval: PW Approval: Date: Other To request an inspection: (952) 442-7520 Date: Date: Page 1 of 1 M PARK City of Spring Park 4349 Warren Ave Spring Park, MN 55384 Phone (952) 471-9051 Fax (952) 471-9160 Project Name: Date: 09/03/2025 Approval Status: Approved with Comments Jurisdiction: City of Spring Park Construction Type: ID: 25SP-00060 Applicant Name: Satoree Kitchen & Bath - Carrie Applicant Phone: (612) 695-9167 Applicant Email: carrie@satoreekb.com Jobsite: 2450 ISLAND DRIVE Code: 2020 1300, Minnesota Building Code Administration; 2020 1305, Minnesota Building Code Reviewed: Building The plans and specifications, for the project named above, have been reviewed for substantial compliance with the current Minnesota State Building Code. This review is limited to the submitted scope of work; is based upon the supposition that the data on which the design is based are correct and that the necessary legal authority has been obtained to construct the project. Although every attempt has been made to identify code issues or concerns for proper and necessary change, the project designer(s), the building contractor(s) and the property owner(s) are ultimately responsible for providing complete code compliance and maintaining minimum construction standards for the safeguarding of life or limb, health, public welfare and property while constructing this project. Approval is based on the correction of all noted deficiencies and compliance with all items listed below. Any changes from these documents and/or additional information shall be submitted to the Department of Building Safety for code compliance review and approval. Written response of approval must be on site prior to implementation of such changes. The following information is related to the submitted plans/scope or as general information regarding code compliance. Compliance with the stated requirements will be verified during the construction process. All work shall be inspected. It is the responsibility of the contractor/installer to contact the Department of Building Safety, when ready to schedule an inspection, at (952) 442-7520 during regular business hours. If you have any questions or concerns regarding this plan review, please contact me via telephone at (952) 442-7520 or email at codereview@mnspect.com. Kevin Kamerud Plans Examiner (952) 442-7520 kkamerud@safebuilt.com 2450 ISLAND DRIVE Page 1 i-2 PARK Plan Specific Items: Building: Approved with Comments - Kevin Kamerud, kkamerud@safebuilt.com City of Spring Park 4349 Warren Ave Spring Park, MN 55384 Phone (952) 471-9051 Fax (952) 471-9160 The following information is related to the submitted plans/scope as general information and/or code compliance requirements. Compliance with the stated requirements shall be verified during the construction process. Items to be Addressed and/or Corrected: Building Code Item_s_; 1030.1 General. In addition to the means of egress required by this chapter, emergency escape and rescue openings shall be provided in Group R occupancies as follows. Basements and sleeping rooms below the fourth story ' above grade plane shal I have at least one exterior emergency escape and rescue opening in accordance with this section. Where basements contain one or more sleeping rooms, emergency escape and rescue openings shall be required in each sleeping room, but shall not be required in adjoining areas of the basement. Such openings shall open directly into a public wayor to a yardor courtthat opens to a public way 1015.8.1 Window opening control devices. Window opening control devices shall comply with ASTM F2090. The window opening control device, after operation to release the control device allowing the window to fully open, shall not reduce the minimum net clear opening area of the window unit to less than the area required by Sec- tion 1030.2. 1015.8 Window openings. In occupancy Groups R-1, R-2, and R-3 where the lowest part of the opening of an operable window is located more than 72 inches (1829 mm) above the finished grade or other surface below, the lowest part of the window opening shall be at a height not less than 36 inches (914 mm) above the finished floor surface of the room in which the window is located. Operable sections of windows shall not permit openings that allow passage of a 4-inch- diameter (102 mm) sphere where such openings are located within 36 inches (914 mm) of the finished floor. Exceptions: 1. Operable windows where the lowest part of the opening is located more than 75 feet (22 860 mm) above the finished grade or other surface below and that are provided with window fall -prevention devices that comply with ASTM F2006. 2. Windows whose openings will not allow a 4-inch- diameter (102 mm) sphere to pass through the open- ing when the window is in its largest opened position. 3. Openings that are provided with window fall -pre- vention devices that comply with ASTM F2090. 4. Windows that are provided with window opening control devices that comply with Section 1015.8.1. 1. Access.ibility Code_lt_ems; 2. Refer to attached handouts for Accessibility requirements in restroom. 3. (MAC Subsection) General Information: 1. Comments: i. Read all attached information. 2450 ISLAND DRIVE Page 2 PRINIG PARK ')rr Cali :1lnrnclw;I;,r City of Spring Park 4349 Warren Ave Spring Park, MN 55384 Phone (952) 471-9051 Fax (952) 471-9160 ii. Every person performing work for which the code is applicable shall comply with the requirements of the code. iii. The person, firm, or organization securing the permit is responsible for code compliance for the work being performed. iv. The site address shall be posted and visible from the street. 2. Inspections: I. Construction or work shall be inspected in accordance with the requirements of Minnesota Rule 1300.0210. ii. It is the responsibility of the contractor/installer to contact the Department of Building Safety, when ready to schedule an inspection, at (952) 442-7520 between the hours of 8:00 a.m. and 4:30 p.m., Monday through Friday. iii. The approved permit and all related plans and documentation shall be on site and available to the inspector at the time of inspection. iv. Failure to provide the required documentation to the inspector at the time of inspection may result in a cancelation of the inspection and additional inspections fees for the additional inspection(s). v. The field inspector may identify additional code compliance requirements. Required Inspections: • Final - in progress Required Documentation_ • Special Inspections Summary Report 1. Ap�liicable Codes: i. 2020 MN Building Code (MBC) (2018 IBC as amended) ii. 2020 MN State Fire Code (MFC) (2018 IFC, as amended) iii. 2020 MN Accessibility Code (MAC) (2018 IBC Ch.11 & 2009 [CC/ANSI A117.1 as amended) iv. 2020 MN Energy Code (MCEC) (2018 IECC as amended, 2016 ASHRAE 90.1) 2450 ISLAND DRIVE Page 3 Read all attached materials. Everyone performing work to which the code is applicable shall comply with the code. The field copy of these plans must be kept on -site and made available to inspector during all inspections. To schedule inspections call (952) 442-7520 Please have the permit number and street address ready at the time of the call. Plan Revisions All construction shall comply with the approved IP ans. Plan revisions will not be reviewed in the field without prior approval from the Building Official. Submit all plan revisions to the Department of Building Safety for review, prior to their construction. REFER TO APPROVAL LETTER FOR ADDITONAL COMMENTS AND REQUIREMENTS Buildings shall have approved address numbers, building numbers or approved building identification placed in a position that is plainly legible and visible from the street or road fronting the property. These numbers shall contrast with their background. Addresses shall be Arabic numbers or alphabetical letters. Numbers shall not be spelled out. Each character shall be a minimum of 4 inches high with a minimum stroke width of 1/2 inch. Where access is by means of a private road and the building cannot be viewed from the public way, a monument, pole or other sign or means of identification shall be used and maintained. Electrical All electrical must be approved by local Electrical Inspector. For electrical permit inquiries please contact the City of Mound Electrical Inspector. Dave Hucky (952) 442-7520 In dwelling units, where the lowest part of the opening of a new operable window is located more than 72-inches above the finished grade or surface below, the lowest part of the window opening shall be a minimum of 24-inches above the finished floor of the room in which the window is located. Operable sections of windows shall not permit openings that allow passage of a 4-inch diameter sphere where such openings are located within 24-inches of the finished floor. Window opening control devices shall comply with ASTM F 2090 and R312.2.2 The window opening control device, after operation to release the control device allowing the window to fully open, shall not reduce the minimum net clear opening area of the window unit to less than the area required for Emergency Escape and Rescue openings when such openings are required. Reviewed for Code Compliance This review is limited to the submitted scope of work, is based upon the supposition that the plan accurately depicts the intended construction and end -use, that the necessary legal authority has been obtained to construct the project and work is subject to code compliance and field inspection during construction. By: xevinxamerud Type of Construction: Not Applicable Date: 9/3/2025 Occupancy Classification: Manufacturer's Installation Instructions Shall Be Followed And Available To The Field Inspector At Time Of Inspection. Permit #: 25SP-00060 Code Edition: 2020 MN Building Code Here is a screenshot of the window order and it has the energy ratings on it, I have also attached a copy of the spec sheet from Sierra Pacific's website. Please let me know if there is anything else that you may need. Thank you Aaron PK374 JUNE 2025 PRICEBOOK Vinyl 8000 Designers Single Slider Left/Fixed 59 x 47.75 Custom: Frame Width = 59, Frame Height = 47.75, Sash Split = 50/50, Screen Width = 27.0625, Screen Height = 43.6445 Complete Unit Frame = Black 023, Frame Interior Finish = White, Non J-Channel Frame Sash = Black 023 Low-E, Argon Gas, Standard Intercept Spacer Half Screen Applied, F1exScreen, View Clear Mesh Applied Hdwe, Standard Lock, Hdwe = White, 2-Locks Jamb = 1 15/ 16", No Dry Wall Return Integral Rigid Vinyl Nailing Fin, No Drip Cap IPG = LC-PG40, Ind. CCL = 448-H-005.14, Ind. FL = 0, Ind. TDI = 0 U-Factor = 0.29, SHGC = 0.3, CR = 55, VT = 0.54, Al = <0.30/<1.5, CPD = SIE-N-131-01726- 00001, GapFill I = ARG, Can ER = 19.7979, W m 2k = 1.65 Number Wide = 1, Number High = 1, Width = 59, Height = 47.75, Shape = Rectangle PROD-UCT DATA SHEET Vinyl Designers' Slider At Sierra Pacific, we have a long history of making highly -regarded, smoothly -operating vinyl windows. Our Vinyl Designers' Sliders use the newest materials and technologies to enhance their beauty and performance. And unlike ordinary vinyl windows, ours are available with a black laminated exterior and interior or as painted exterior in 14 decorator colors or color matched to any color in the rainbow. Standard Construction: • 3-1/4" fully welded frame with integral nail fin in European White or Beige with optional painted exterior. • Substantial .060" extruded PVC wall thickness. • Two frame styles: Integral J-channel and Non-J-channel. • Fully welded sash with aluminum reinforced interlock for added structural integrity. • 3/4" Insulated Glass. • Single and triple sliding operating configurations. Surface mounted lock matching the Designers' Single Hung hardware with recessed tilt latches for easy sash removal. Optional auto lock with or without string pull. • Adjustable brass rollers for smooth operation. • Available as New construction (8000 Series) or Replacement (8500 Series) MINIMUM / MAximum FRAME SIZES Custom sizing available in Ill6" increments. Additional sizes may be available upon approval. VINYL DESIGNERS' SINGLE SLIDER VINYL DESIGNERS' TRIPLE SLIDER Minimum Frame Width 23.5' Minimum Frame Width 41.5' Minimum Frame Height 15.5' Minimum Frame Height 15.5' Maximum Frame Width 77.5' Maximum Frame Width 107.5" Maximum Frame Height 71.5" Maximum Frame Height 71.5" Pict Designers seder. singie seder (top) and Triple Slider (bottom). � 'JJ - SIERRA PACIFIC WINDOWS Performance Data: Designers' Slider: 71.5"x 71.5" Designers' Slider: 95.5" x 59.5" AIR INFILTRATION......0.07 AIR INFILTRATION.....0.09 WATER ........................ NO 0.07 AGE @ 4.59 PSF � WATER.......................NO LEAKAGE @ 5.25 PSF STRUCTURAL ... . ........ LC-PG35 (+30/-00) STRUCTURAL..............LC-PG30 (+30/-30) For a comprehensive list of tested and rated sizes and configurations, please refer to the Vinyl Designers' Slider Product Performance Guide (Structural) located in the Technical Resources Library on our website. Thermal Performance (NFRQ F Air Filled Argon Filled Low-E Clear Low-E 366 Low-E 366 w/i89 Low-E Clear Low-E 366 Low-E 366 w/i89 U-FACTOR...... 0.32 U-FACTOR...... 0.32 U-FACTOR...... 0.27 U-FACTOR...... 0.28 U-FACTOR...... 0.29 U-FACTOR.......... 0.25 SHGC............ 0.31 SHGC............ 0.22 SHGC...............0.21 SHGC............ 0.30 SHGC............ 0.21 SHGC............... 0.21 VT..................0.55 VT ................. 0.50 VT .................... 0.49 VT .................. 0.55 VT ................. 0.50 VT .................... 0.49 CR.................53 CR.................. 53 CR.................... 41 CR................. 58 CR.................. 56 CR.................... 44 All values represent insulated glass units using standard Intercept spacer. Additional glazing options available. �AMB DETAIL OPERATING viNYL DESIGNERS' SINGLE SLIDER -INTEGRAL J-CHANNEL FRAME SAD & SILL DETAIL OPERATING VINYL DESIGNERS' SLIDER 8000 SERIES - INTEGRAL J-CHANNEL FRAME ►i II 1 2" Brickmould 3" Flat Casing I Pictured. Vinyl Designers' Sill Nosing slider with flat casing. Vinyl exterior casings are mitered and welded at the corners with the sill nosing mechanically fastened to the bottom of the casing. Each casing is cut and fit per unit and shipped loose to be applied once the unit is installed and flashed. ------------------------ f ' I � ------------------------ I � I � i ' New Construction (8000 Series) Replacement (8500 Series) Operating Designers' Slider Operating Designers' Slider MDTI— n*��+� I AMB DETAIL J�-ouu�:sa+en�-1 OPERATING VINYL DESIGNERS' SINGLE SLIDER - INTEGRAL J-CHANNEL FRAME 8000 SERIES r-AUAMB DETAIL OPERATING VINYL DESIGNERS' TRIPLE SLIDER - NO.., -CHANNEL FRAME 8000 SERIES Typical configurations shown as viewed from exterior. Contact SPW for additional options. LU 1,1 =� I I � Ell Left/Fixed (Xo) Left/Fixed/Right (OXO) Left/Fixed/Right (OXO) Fixed/Rlght (OX) 1/3 —1/3 —1/3 split 1/4-1/2 —1/4 split Optional Flexscreen Ft FEU Vinyl Designers' Slider Additional Features • Painted exterior vinyl using our exclusive 6-step Ultrabond Paint System in 14 decorator colors or custom matched to any color. • Laminated Vinyl (Black): 0.18mm thick film of poly methyl methacrylate (PMMA) including a PVDF top layer. Highly fade resistant with infrared reflecting pigments. Tested in accordance with RAL-GZ 716. • Extensive offering of performance and decorative glass available with intercept spacer for optimum efficiency. • Grille options including Simulated Divided Lites and Grilles - Between -The -Glass. Please visit our website www.sierrapacificwindows.com for additional details or to contact vour nearest Sierra Pacific Branch or Dealer location. %-I I i Ur- %3VKIINU PARK 4349 Warren Avenue PAGE 1 BUILDING PERMIT 25SP-00060 Spring Park, MN 55384 ❑ Handout Given Phone: 952-471-9051 Fax: 952-471-9160 ❑ Lead Handout Given Routed to SAFEbuilt siTE ADDREss:2450 Island Drive Sorina Park. MN 55384 PID:19-117-23-22-UU66 1) Was the home constructed before 1978? (YES ❑, continue with line 2, NO p continue without completing EPA Section) 2) Will the work disturb ?6 sq ft of interior painted surfaces or>20 sq ft of exterior painted surfaces? (YES ❑ to line 4, NOOline 3) go 3) Are there any windows being replaced? (YES ❑, go to line 4. NO❑continue without completing EPA Section) 4) Has this home been Certified Lead Free? (YES [1, you MUST Attach Certification Information, NO ❑ complete line 5) 5) EPA Contractor Certification Number: NAT - PROPERTY OWNER: Highland Management Address:5290 Villa Way cit Edina sate: MN z*:55436 Email: ngreene@highlandapts.com Contact Name: Nick Greene Phone. 952-928-7556 CONTRACTOR: Satoree Kitchen and Bath Address: 5806 W 36th St city: St. Louis Park state MN zip: 55416 Phone:612-695-9167 Contractor License No: BC705300 Fax: Contact Name: Carrie Shere Phone: 612-695- 1167 I - mail: Carrie@sato reek b.com ARCHITECT: Address: City State- MN Zip: Phone. Fax: Email: TYPE OF WORK: [3 New TYPE Construction Contact Name: Phone - ❑Deck ❑Cgmmerciai ❑Residential ❑Change of Use ❑Pool ❑Re -Roof R ATONOOFrVbCM ❑Finish Basement ❑Retaining Wall ❑FceES e ❑Remodel Square feet. ❑Addition ❑Porch ❑Shed s ft q ❑Demolition ❑Window/Door Replacement ❑Garage-Attached/Detach [Plumbing -provide detail on Page 2 # being replaced Detailed Description of Work: ❑Accessor Structure New windows like for like ❑Mechanical -provide detail on z Pa e y ❑ Misc Other New Lap siding like for like. Signature of ILis application ":he legal property evm^r or a licensed contractor, as the owners representative, is required and authorizes the Zorvng Administrator or tlesigned nrnf the Building Oflioal or designee to enter upon the property to perform needed inspections Entry may be without prior notice. I hereby acknowledge is We that I have read this a and cortect to the best Of my knowledge I further agree that all work performed vAll be In accordance with approved plans, s p�'nd 10a and state that all noes ft he specifications and conditions and to Municipality and the laws of the State of Minnesota regarding actions taken pursuant to this all ordinances of Uro expires when work is not commenced within 180 days from date of permit, or d wurk rs suspend dIt abandoned. o not plan inspected reviewf if even if ed w th rrlg0 days be and the not eproceed with the work. Pernit a emul or in':rRcuon, wdl be rwb eel to J penal p y scope of this permit, or work Kithout SIGNATURE OF APP CANT: PRINTED NAME: (' DATE: This is the signature of: []Owner or ElOwner's Representative OCCUP. TYPE. CONST TYPE: CODE: VALUATION: $ BLDG SPRINKLED Yes / No Permit Fee: $ Plan Review Fee: $ 1'7 D Park Dedication: $ State Surcharge: $ �. &0 SAC Charge: $ _ _ Site Inspection Fee: $ WAC Charge: $ S.E.C. Fee: $ Sewer Hook -Up: $ Investigation Fee / Other Fee: $ Water Hook -Up: $ 1 Copy Charge ($.25 per 8.5x11 page) $ Sewer Trunk: $ O License Check ($5) / Lead Check ($5) $ Water Trunk: $ ILI co SUB -TOTAL $ R5 �1- W Water Meter $ Plumbing Fee (from Page 2) $ City Fee: $ -- w L) Mechanical Fee (from Page 2) $ Other: $ U. Special Conditions!Required Setbacks: TOTAL DUE: S J, O i Building Approval By: DATE: 9 Printea Building Approval By: Kev i n Kame rud ❑ License Verification ❑Lead Verification - Checked By: City Approval By Paid: y �, Date: ti/3/a Receipt No. DATE: 3 BY: Jamie Hoffman From: payment@thepaymentgroup.com Sent: Wednesday, September 3, 2025 1:28 PM To: Jamie Hoffman Cc: payment@thepaymentgroup.com Subject: CARRIE SHERE Permit Payment to Spring Park, MN - Permits & Licenses from TPG Dear Spring Park, MN - Permits & Licenses, CARRIE SHERE has made a web Payment through The Payment Group for: Date Paid: Confirmation: Credit Card Number (last 4 digits): Credit Card Type CARRIE SHERE Wednesday, 03 September 2025 13:27:40 CT DJUHBY 2603 Visa SATOREE KITCHEN 2450 ISLAND DRIVE 25SP-00060 $4,591.80 AND BATH CARRIE SHERE can be reached at: 612-695-9167 or carrie@satoreekb.com if there are any questions regarding this payment. Click here to login to your The Payment Group admin account Thank you once again for choosing The Payment Group! RECEIPT City of Spring Park 4349 Warren Ave, Spring Park, MN 55384 (952) 471-9051 25SP-00060 I Re-Window/Exterior Door (Commercial) Payment Amount: $4,591.80 -WA -i �-- SPRING PARK On Lake 11innetonka Receipt Number: 475 September 3, 2025 Transaction Method Payer Cashier Reference Number Credit Card Satoree Kitchen and Bath Jamie Hoffman DJUHBY Comments Assessed Fee Items Fee items being paid by this payment Assessed Fee Item On Account Code Assessed Amount Paid Balance Due 09/02/25 State Surcharge $150.00 $150.00 $0.00 09/02/25 Commercial R/S/W/D Plan Review $1,749.80 $1,749.80 $0.00 09/02/25 Commercial Roof/Siding/Window/Door $2,692.00 $2,692.00 $0.00 Totals: $4,591.80 $4,591.80 Previous Payments $0.00 Remaining Balance Due $0.00 Application Info Property Address Property Owner Property Owner Address Valuation 2450 ISLAND DRIVE DOCKSIDE APTS ON LK 5290 VILLA WAY $300,000.00 SPRING PARK, MN 55384 MTKA LLC EDINA, MN 55436 Description of Work new 153 windows - same size openings