Permits - Permit# 26SP-00055 - 4300 Shoreline Drive - 7/8/2026 City of Spring Park Fire Suppression
(Commercial)
4349 Warren Ave, Spring Park, MN 55384
26SP-00055
WRING PARK
nGa e9lfirineton'a Phone:(952)471-9051 Fax: (952)471-9160
For Inspections: (952) 442-7520
Date Issued: 07/08/2026 Property Owner: TONKA VENTURES/Cole Buttenoff
Expiration Date: 01/04/2027 Mailing Address: 102 JONATHONA BLVD N, STE 200
Job Site Address: 4300 SHORELINE DR, SPRING
PARK, MN 55384 CHASKA, MN 55318
Category: Fire Phone: (612) 723-0783
Permit Type: Fire Suppression(Commercial) Email: cole@cornerstone-mn.com
Valuation: $2,985.01
Description of Work:
We will be reconnecting flow and gate valves that were changed out as well as connecting a new riser to the existing DMP
XR150 fire panel. a smoke and pull station will be installed at FACP to bring up to code
Subdivision: Required Setbacks:
Parcel ID: 1811723430188
Filing:
Lot: Actual Setbacks:
Block:
Total Sq Ft:
Contractors: Fee Items Amount
Primary NORTH STAR ALARM COMPANY(612) 822- State Surcharge $ 1.49
4094
Commercial Fire Permit $ 120.25
Fire NORTH STAR ALARM COMPANY(612) 822-
4094 Commercial Fire Plan Review $78.16
Total Fees: $ 199.90
NOTICE
Signature of Applicant/Date Building Department Signature/Date
07/08/2026
MUST BE POSTED ON JOB SITE
INSPECTION CARD
iwizzz City of Spring Park
SPRING PARK
OnGakfMinnetonka 4349 Warren Ave, Spring Park, MN 55384
POST THIS CARD IN A SAFE CONSPICUOUS LOCATION.PLEASE DO NOT REMOVE THIS NOTICE UNTIL ALL REQUIRED INSPECTIONS ARE MADE AND SIGNED OFF BY THE APPROPRIATE
AUTHORITY AND THE BUILDING IS APPROVED FOR OCCUPANCY.STAMPED APPROVED PLANS MUST BE AVAILABLE ON THE JOBSITE.
Fire Suppression
PERMIT NO.: 26SP-00055 PERMIT TYPE: (Commercial) ISSUED DATE: 07/08/2026 EXPIRATION DATE: 01/04/2027
1811723430
PROJECT ADDRESS: 4300 SHORELINE DR,SPRING PARK,MN 55384 PARCEL NO.: 188
OWNER: TONKA VENTURES/Cole Buttenoff OWNER PHONE: (612)723-0783
CONTRACTOR: NORTH STAR ALARM COMPANY CONTRACTOR PHONE: (612)822-4094
WELLINGTON SECURITY SYSTEMS
APPLICANT: -AMANDA APPLICANT PHONE: (612)822-4094
We will be reconnecting flow and gate valves that were changed out as well as connecting a new riser to the existing DMP
DESCRIPTION OF WORK: XR150 fire panel.a smoke and pull station will be installed at FACP to bring up to code
CONSTRUCTION TYPE: OCCUPANT LOAD:
DATE DATE
INSPECTION INSP PASSED COMMENTS INSPECTION INSP PASSED COMMENTS
Fire Suppression Hydrostatic Test
Rough-IN Fire Suppression Final
Reports
Fire Approval: Date: Engineering Date:
Approval:
PW Approval: Date: Other( ): Date:
To request an inspection:(952)442-7520
Page 1 of 1
City of Spring Park
4349 Warren Ave
Spring Park, MN 55384
Phone(952)471-9051
SPRING PARK Fax(952)471-9160
n La•e Minneton°a
Project Name:
Date: 07/01/2026 Approval Status: Approved with Comments
Jurisdiction: City of Spring Park Construction Type:
ID: 26SP-00055 Applicant Name: WELLINGTON SECURITY
SYSTEMS-AMANDA
Applicant Phone: (612) 822-4094 Applicant Email: ADM@wellingtonsecurity.com
Jobsite: 4300 SHORELINE DR
Code:
Reviewed: Fire Alarm
The plans and specifications,for the project named above, have been reviewed for substantial compliance with the
current Minnesota State Building Code. This review is limited to the submitted scope of work; is based upon the
supposition that the data on which the design is based are correct and that the necessary legal authority has been
obtained to construct the project.Although every attempt has been made to identify code issues or concerns for proper
and necessary change,the project designer(s),the building contractor(s)and the property owner(s)are ultimately
responsible for providing complete code compliance and maintaining minimum construction standards for the
safeguarding of life or limb, health, public welfare and property while constructing this project.
Approval is based on the correction of all noted deficiencies and compliance with all items listed below.Any changes from
these documents and/or additional information shall be submitted to the Department of Building Safety for code
compliance review and approval. Written response of approval must be on site prior to implementation of such changes.
The following information is related to the submitted plans/scope or as general information regarding code compliance.
Compliance with the stated requirements will be verified during the construction process.
All work shall be inspected. It is the responsibility of the contractor/installer to contact the Department of Building Safety,
when ready to schedule an inspection, at(952)442-7520 during regular business hours.
If you have any questions or concerns regarding this plan review, please contact me via telephone at(952)442-7520 or
email at codereview@mnspect.com.
Michael Hauan
Plans Examiner
(952)442-7520
mhauan@safebuilt.com
4300 SHORELINE DR Page 1
.-►" City of Spring Park
4349 Warren Ave
Spring Park, MN 55384
Phone(952)471-9051
WRING PARK Fax(952)471-9160
n La fie Yinneton a
Plan Specific Items:
Fire Alarm:Approved with Comments-Michael Hauan, mhauan@safebuilt.com
PLANS DATED: 6/9/26
PLAN SHEETS REVIEWED: FA.1
SCOPE OF WORK:We will be reconnecting flow and gate valves that were changed out as well as connecting a new
riser to the existing DMP XR150 fire panel. a smoke and pull station will be installed at FACP to bring up to code
PLAN SPECIFIC ITEMS (to be completed during the construction process):
1. All initiating devices shall be tested for proper operation.
2. A monitoring report shall be submitted to the inspector during the inspection.
3. Fire alarm system shall be on a dedicated circuit and shall have an approved locking device installed. (NFPA 72-
2016, Section 10.6.5.1.2& 10.6.5.4)
4. Battery shall have the date of installation identified on it.
5. Date and time shall be current on the FACP during or shortly after the inspection has been completed.
GENERAL ITEMS:
1. Construction or work shall be inspected in accordance with the requirements of Minnesota Rule 1300.0210.
2. It is the responsibility of the contractor/installer to contact the Department of Building Safety,when ready to
schedule an inspection, at(952)442-7520 between the hours of 8:00 a.m. and 4:30 p.m., Monday through Friday.
3. The approved permit and all related plans and documentation shall be on site and available to the inspector at the
time of inspection.
4. Failure to provide the required documentation to the inspector at the time of inspection may result in a cancelation
of the inspection and additional inspection fees for the additional inspection(s).
5. The field inspector may identify additional code requirements during inspections. (Example of code requirement
items that might be identified are fire sprinkler heads being obstructed by framing, beams, lighting, ceiling
configurations, plumbing pipes, and mechanical system ductwork that will require review by the fire suppression
plan reviewer. Additional work being completed that is not consistent with the project scope of work or the
approved plans.)
Applicable Codes: 2020 Minnesota State Building Code, NFPA 72-2016
4300 SHORELINE DR Page 2
Read all attached Plan Revisions
materials. All construction shall comply with the approved plans.
Everyone performing Plan revisions will not be reviewed in the field without prior approval
from the Building Official. Submit all plan revisions to the Department
work to which the code of Building Safety for review, prior to their construction.
is applicable shall
comply with the code.
Electrical
All electrical must be approved by local Electrical Inspector.
The field copy these plans must For electrical permit inquiries please contact the City of
be kept on--ss ite and made Mound Electrical Inspector.
available to inspector during all Dave Hucky
inspections. (952) 442-7520
To schedule inspections call
(952) 442-7520
Please have the permit number
and street address ready at the
time of the call.
Reviewed for Code Compliance
This review is limited to the submitted scope of work, is based upon the supposition that the plan
accurately depicts the intended construction and end-use, that the necessary legal authority has
been obtained to construct the project and work is subject to code compliance and field
inspection during construction.
By: Mc4ae(Ilauan Type of Construction: N/A
Date: 7/1/2026 Occupancy Classification: N/A
Permit#: 26SP-00055 Code Edition: 2020 MN Building Code
0
0
� 8
v
n
m
O OnY
y � U
o
O
� 8
0
o -
EPA t?
zo N 8010 QH oBo �0�
0 1�
- £
—7 -- Z
_ FIRE TONKA-4300 2020 MN STATE CODE
a ! 1 4300 SHORELINE DRIVE NFPA 72 2016
WEIIINGTUNSE URITYSYSTEMS Dl SPRING PARK,MN 55384 NFPA 70 2023
w:.:�� �a
sjoinunwwo) ,, ,
pajap
pmjau 6ulsn uo►suedx3alows. ,. ,,
Alddns aaMod Aaelllxne ao a)uewjoljad pue Allllgeis snq aalM-inol A sauoz)QA Zi"'
laued woji paaaMod aq ue) . saansua u61sap uanoad . 6ulsn sa)IAap i)auuo) U01pajap uoll,
Meip juann)Mol . „,sng-Xl ao pedAa� sa)lAap umpaioid pue 4eajqsselfi '
aalM-inol of uoipauuo)Ase3 . jeou 6ullunow jol algelmS . ' '' '
jnq
6ulsnoq leiaw jo p•
)liseld Mipeaiie pue algeina . sadAi auoz uolsuedxa auoz Molle iegj
laued Ile ql!m apiedwo) . slaued dWa ql!m appedwo3 . '
uolie)lunwwo)laued
pooh saie)lpul xoq 6ue6-aajgi ao IIeM uo aalj pue Aael6inq
aapuedxa auoz uo a31 eiea . sase)anl>Mile iunow Apse] . aoi sauoz 8 ssep saplAoJd uoisuedxa
laued i
s3anib3=i
x'
salnpoW uoisuedx3 ouoZ
swadiddwaMD 0 ® ® 0 0 wo:)•dW(3
DMP.COM ® 0 e 0 Q Q @DMPALARMS
USE ON THE DMP LX-BUS 708 BUS EXTENDER MODULES 710
The modules can be used on the LX-Bus The 708 Bus Extender Modules allow As a splitter,the 710 provides superior
of DMP panels.The modules connect to you to increase the length of wire used mechanical wire connecting capability
the four-wire bus and use only one zone to run an LX-Bus or keypad bus by a for up to three additional 12 VDC LX-
address.To assign an additional zone maximum of 4,000 feet,while providing Bus or keypad bus circuits.This makes
expander,use the next available immunity to noise on the wires.This the 710 module an excellent junction
zone address. model comes as a pair of modules that box when terminating multiple LX-Bus/
connect between the panel and LX-Bus keypad bus runs at one location.
CONNECT TO KEYPAD BUS or keypad bus devices.
As a repeater,the 710 module can be
You can also use the modules as an Use the 708 modules for applications installed at the end of an LX-Bus or
addressed device on the keypad data
bus of DMP control panels. that include running wire over long keypad bus circuit to allow an additional
distances,through noisy environments circuit to be added,thus increasing the
Simply set the module to an available or where the bus is bundled with other total wire length.
keypad address and connect the wiring wires,such as telephone company wire.
to the appropriate screw terminals. The 708 extender can be used on all 712-8 ZONE EXPANSION MODULE
DMP panels. Expand your system at an affordable
SIMPLE ADDRESSING
price!You can connect non-powered
Address the 711S,714,714-8,714-16,715, burglary devices to DMP panels using
715-8 and 715-16 modules by setting two the 712-8 module.It is compatible with
onboard rotary switches with a small many intrusion contacts,glassbreak
screwdriver.The 712-8 uses slide detectors,motion detectors and
dip switches. intrusion detectors.
EASY INSTALLATION 108 FEATURES
Zone expansion modules are mounted a
'S
in a decorative plastic housing suitable Extends keypad bus orLX-Bus by4,000 feet with
�
for installing outside the panel enclosure, one pair of modules '
such as on walls or single-gang boxes. Connects to an auxiliary power supply for added _--'- -
After all wiring connections are made, n i°' r zA,4
the covers go on to form tight-fitting polder
protection against incidental contact or Uses existing wire:No need to run additional wire
tampering. Allows twisted pair and/or shielded wire between 712-8 FEATURES
714-8,714-16,715-8 and 715-16 Zone the 708 modules ' Eight grounded,addressable burglary zones
Expanders are housed in a rugged, 710 BUS SPLITTER/REPEATER MODULE Set jumper for LX-Bus or keypad bus operation
20-gauge,cold-rolled steel enclosure. Compatible with all DMP panels
The 710 Bus Splitter/Repeater Module Expand systems by connecting a second 112-8
You may also mount the 708 and '
Y allows you to expand the typical LX-Bus
710 modules inside a DMP enclosure or keypad bus installation both in the Easily address using dip switches
using the three-hole configuration number of devices and the length of the ' Snaps into panel enclosure using three-hole pattern
and the provided standoffs.The 712-8 wire used.Each 710 module provides Separate zone I k End-of-Line resistors included
only mounts using the three-hole three bus connections up to 2,500
configuration and provided standoffs. feet.When using multiple modules,the
ZONE PROGRAMMING total distance of all circuits can be an
incredible 15,000 feet!
Program the zone on the modules with
any of the panel's available zone types
for use in burglary applications including
arming type zones when used with
keyswitches.
The expansion zones are programmable
for annunciation on DMP keypads
connected to the panel.Each zone
can also be individually programmed to
report alarms,troubles and
restorals to remote DMP SCS-1R or
SCS-VR Receivers.
SALES APP
BUILD A SYSTEM
714/715 ZONE EXPANDERS 714-8,714-16,715-8 AND 715-16 711 DES(RIPTION
The 714 contains four Class B burglary The expanders are housed in a model The 711 Zone Expansion Module connects
zones and is suitable for use with 340 locking metal enclosure suitable to the panel's four-wire keypad bus or
burglary and fire devices that are for mounting in a remote location.Each LX-Bus and is set to an address that
normally opened or normally closed. expander provides screw terminal determines the reporting zone number.
Individual zones are supervised with strips for zone inputs and data bus The 711 provides one Class B zone for the
1 k ohm End-of-Line(EOL)resistors and connections,a two position jumper to connection of detection devices.
can be programmed with any burglary or designate connection to the keypad bus r
fire zone type. or the LX-Bus and an LED to indicate
The 715 contains four Class B powered
communication with the panel.Separate s
zone EOL resistors are included with
zones and is suitable for use with W I
12 VDC,two-wire smoke detectors each expander. — J�
and non-powered fire or burglary
devices.Individual zones on the 715 are
supervised with a 3.3 k ohm EOL resistor 711 FEATURES
and can be programmed with any ' Single-zone expander
burglary or fire zone type. . Rugged screw terminals accommodate
14-22-AWG wire
OPTIONAL ACCESSORIES �The standard wiring harness can be Board fits in Radionics POPIT housing
�replaced with the optional 718T Plug-in 714-8/714-16 EXPANDERS Easy rotary switch addressing
Screw Terminal. The 714-8 Expander contains eight Class
7115 DESCRIPTION
The enclosure can also accommodate the B zones.The 714-16 Expander contains 16 The 711S Zone Expansion Module is a
719T Terminal Boards for the 714 or the Class B zones.Both are suitable for use flying lead style,single-zone,addressable
720T Terminal Boards for the 715,which with normally open or normally closed expansion module that allows you to
pass through the wiring of the panel's burglary and fire devices.Individual increase the number of reporting zones
LX-Bus.1 k EOL resistors are included zones are supervised with a 1 k ohm EOL available on XT30/XT50 and XR150/
with the 719T,and 3.3 k resistors are resistor and can be programmed as any XR550 Series panels.It's ideal for smaller
included with the 720T. zone type.The 714-8 hardware level E applications,such as installing in a pull
is compatible with 1k-4.7k end of line station back-box or even in a recessed
'• resistors,making takeovers easy.
contact hole behind the contact.The
715-8/715-16 EXPANDERS modules connect to the panel's four-wire
The 715-8 Expander contains eight Class keypad bus or LX-Bus and are set to an
B address that determines the reporting
powered zones.The 715 16 Expander
zone number.The 711S provides one Type
contains 16 Class B powered zones.Both A Class B zone.
are suitable for use with 12 VDC two-
wire devices,such as smoke detectors
or with non-powered fire or burglary { ,__.-------
devices.Individual zones are supervised
with a 3.3 k ohm EOL resistor and can be
programmed as any zone type. 114N-POE
714/715 FEATURES The 714N-POE Network Zone Expander
• Four protection zones on each module 714-8,714-16,715-8 AND allows you to add four zones to the
• Comes withl2-conductor wire harness 715-16 FEATURES XR150/XR550 Series panels using IP
• Optional l2-position screw terminal 8 or 16 protection zones per expander network capability.Individual zones
are compatible with 1 k-10 k resistors,
Durable metal enclosure housing with lock and key giving a wide variety for takeovers.POE
Individual screw terminals accommodate compatibility provides power for the
14-22-gauge wire for easy connection expander and provides 12 V output
Suitable for mounting in a remote location for powered zones such as PI Rs or
glassbreaks.Using AES encryption to talk
to the panel provides the next level of
protection to the expander.
ssloz I zfzo n I'>ul`spnpoid 6wJolluoW lell6lO OZOZ 0 0,SCI x H„SL'Z X M,S'V suolsuawlatlw Z xew')OA S a6elOA auoZ
tlw OSC luaJJn)lndln0 algel!eAV
'6olele)Jo isn Mid dWQ MS671 McJO MOON
aql q)aq)Jo A)ueJieM/wo)dWa of o6`AluerJeM pallwn dWo MA Zl (30d)a6elloA indin0
Ilnl aql pear of uopadsul iol dWQ of paumlar are spnpad MA Zl le tlw St wJeltl M,,S'Z x HST suo!suawl0
aelpalap agl to saldwes aAlleluasaJdaJ legl papinad'JaAnq AA ZI le tlw SL AgpuelS Lwele u1 auoz lad tlw Z+tlw Ll
leul6po agl of alep anonul aql wal SMA(D aajgi to pouad McJO luaJJn) auoz anlue lad tlw 9'l+tlw Ll McJO luaJJn)
e iol 6ul6eJped pue'6ullagel'iunpeinuew to spalap wort MA S8Z of MA 58 JaMod AJewlJd MA Et 01 8*8 a6elloA 6ulleJadp
awl aq Ilegs ularaq pagpsap pue dWQ Aq pampelnuew alnpoW uolsuedX3 auoZ�MaN 30d-NVII alnpoW uolsuedx3 auoZ 8-Zit
spnpad aql leqj sluejjem dWQ-AmvauvM O311Wn
paa J010)911-S1L H,,SL'Z x M„SZI suo!suawl0
sluouodwo legol6 g•S•n 6ulsn lsaQ AeJ9 Jolo)91/8 VlL tlw Z xew')OAS a6elloA auoZ
OW'Play6uudS ul paJnl>elnuew g paJaaul6ua`pau6 0,S'f X H,S'll x M,,S'Zl suOlsuawla wJeltl
tlw LT
fOSS9OW`plag6updS'pa18 dipauped'N OOSZ laals pa!loJ-plot a6ne6 OZ aJnsol)u3 tlw Z'VLT AgpuelS
wosdWO I zon-m-008 UlJele
ul allows lad tlw Of allows aJIM-Z lad luaJJn)6ulleJadO
MA 0'Sl of g�g a6elloA 6ulleJadO
[O+auoz pallogs lad tlw SS+tlw OZ �eltl alnpoW uomJedx3 auoZ SILL
allows aJIM-Z
lad rO+auoz lad tlwV+tlwOZ a6eJaAV 0,,SC'lxH,,SL'ZxM,,S'V suo!suawlO
91/8-SIL (103 ssone tlw TO MA S a6ellOA auoZ
auoz lad tlw Z+tlw OZ wJeltl wJele u1 auoz lad tlw Z+tlw 11 wJeltl
auoz lad tlw 9'l+tlw OZ a6eJaAV auoz anll)e lad tlw g'l+tlw It a6eJaAV
91/8-VL luaJJn)6ulleJadO
luaJJn)6u1leJado MA O'Sl 018'8 a6elloA 6ulleJado
MA O'Sl 019*8 a6ellOA 6u!leJadO alnpoW uolsuedx3 auoZ ltL
uolsuedx3 auoZ 9l-Sit wnwlxew laal 000'Sl
pue 8-SlL 191-VLL IS-VLL `(alnpow auo)ON OOS'Z a)uelslO
R't x H„SCZ.MST suo!suawl0
a)uelldwo)/w0)dW0 0„SCl■H,,SCZ=MST suolsuawlO 0, tlw Of luaJJn)6upeJadO
of 06 uogewolul leuolllppe Jo j wJele u1 allows lad tlw Of+allows aJIM-Z lad MA 0'Sl of g g a6elloA 6ulleJad
l�O+auoz palJogs lad tlw 8S+tlw L wJeltl
paisll(1p)sauoleJogel slalpMJapun(Aluo 51L allows aJIM-Z lad alnpoW jaleadaapalpIdS sne OLL
'V IL'IID(L919#VO)ANO3)All)WA MaN(W3S)) rO+auoz lad tlw V+tlw L a6eJaAV SIL salnpow 80L oMl
JjeqSjelaawW Ai ale1S .sluawa inballdde Jeln)l1Jed auoz lad tlw Z+tlw L wJeltl a41 uaaMlaq laal 000'V a)uels!O wnw!xeW
e laaw of Aiessa)au sluawaJ!nbaJ 6ulwweJ6wd auoz lad w � + w a6eJan
pue uogellelsw Jol s6ugs!l a)uelldwo) tl 9 t tl L tl V lL 0,SCI H,,SL'Z M,S'V suolsuaw!0
)Opads Jol sapin6 uogellelsul pue luaJJn)6u!leJado lied lad tlw OZ luaJJn)6ulleJado
6ulwweJ6wd hued aleudoJdde aql of Jalad )GA O'St 018*9 a6elloA 6upejad0 MA O'St 01 TO a6elloA 6u!leJadO
suol;eai;i:wa:) alnpoW uomJedx3 auoZ SUIVLL alnpoW zapualx3 m8(in-noN)80L
sauaS BX 30d Jo)OA ZI SaA ON V 30d-NVIL
)OA Zl aJnsopu3 IelaW ON 8 sseD 91 AJeloB 91-SIL
)CA ZI amsopu3 IelaW ON 8 sseD 8 AJeloB 8-slL
)CA ZI saA ON 8 SseD V AJeloB SIL
MA Zt amsopu3 IelaW ON 8 sseD 91 AJeloB 9t-VV
)CA ZI amsopu3 IelaW ON a sseD 8 AJeloB 8-W
sapaS BX Pup sapaS 1X
MA ZI saA ON 8 sseD V AJeloB VlL
MA ZI ON ON t AJeloB SILL
)CA Zl SaA ON I AJeloB ILL
)CA ZI ON SaA 8 p pmS dIO 8-ZIL
dWOIIV MA It SaA saA VIN V/N OIL
MA ZI SaA saA V/N tlIN SOL
spued i , OUR"
,alnpow uolsuedxo auoz dW0 tpeo Joj sain;ea4 ay;;o uoslaedwoo a Jol nnolaq;Jeyz)ay;o;aalab
AM MOM)MOW N01SNVdX3 3NOZ
•
S3inaOW N0ISNVdX3 3NOZ
LISTED )
Simple operation
' � 4
provides instant
alarm
UAL
i
P
_ = The 850 Series Fire Alarm Pull stations offer
quick and simple operation that's economical
and reliable.
• Available in single or dual-action manual
putts
• SPST contacts and terminal strip
connections
• Gold-plated contacts to avoid the risk of
corrosion
• Approvals: UL and CSFM • Mounts on standard single-gang box
• Americans with Disabilities Act (ADA) compliant • Optional surface and weatherproof backboxes available
• Die-cast metal construction • High-gloss red enamel finish
• Reset key • Scored acrylic breakrod
'ING OPTIONS 8SG_
The DMP 850 Series Fire Alarm Pull A variety of mounting options are On the Model 850D Dual Action Pull
Station is a high quality, die-cast available for the 850 series. It can be Station, the push bar rotates inward
metal manual pull station available flush mounted to a standard single gang allowing the PULL handle to be grasped
in either single-action or dual-action switch box or surface mounted in two in a one handed motion.
configurations with SPST contacts and optional configurations. The Model
terminal strip connections.The normally 850-SB Interior Surface Backbox or the
open contact,which closes when the pull Model 850-WP Weatherproof Backbox To create an addressable reporting zone
station is activated,is rated for 1 Amp @ both allow conduit connection to the for the 850 Series, install a Model 711
30 VDC.The contacts are gold-plated to 850 Series Pull Stations. Zone Expansion module.
avoid corrosion risks.
Scored acrylic breakrods are used with The Model 8505 Single Action Pull Station
the 850 series. is operated by pulling the handle on the
COMPI a P,"_ front of the station as far down as it
The 850 series has been tested by UL for goes. When the handle locks into place
compliance to the latest requirements it is easily visible from up to 50 feet.
of the ADA. Reset the handle by opening the station
with the supplied key,placing the handle
in the normal upright position and
re-locking the station.
PULL Screw
Terminals
To next
To Fire Alarm device or
Control Panel EOL resistor
Model 850 Wiring Diagram
SPECIFICATIC ORDERING INFOi
Switch Rating 1 Amp @ 30 VDC 8505 Single-action pull station
Dimensions 4.75" H x 3.25"W x 2.25" D 850D Dual-action pull station
Color Red w/raised white letters,white 850-SB Interior surface sheetmetal backbox s` =
PULL handle w/raised red letters 850-WP Weatherproof surface die-cast backbox
850-AR Scored acrylic breakrods (1 dozen) _
The 850 Series Fire Pull Station is compatible with all 850S/711 Single-action pull station w/addressable module s
DMP Command Processors. 850D/711 Dual-action pull station w/addressable module
Note:All models are supplied with one scored acrylic breakrod and
one key.
641 -4 82 INTRUSION FIRE ACCESS NETWOR
NNW www.d . 2500 North Partnership Boulevard
0�9�=•�^^� =�M^9Products _ Springfield, Missouri 65803-8877 � IIh
£60Z 3-L0-06Z OLZ:60ZL-ZLZL W,10£ LL6S
panoidde panoidde 03^odddd �31S11
WJSW d3Was!
o
aohaiap pea 1e uo!lea!pui snlels a316u!pinoid Aq 6uu!nn dool
6u!le!l!ui ayl sayuan ainlea;s!yl•sjoiDalap d anM-ow uo algel!ene
s!amlea;lsal dool IleM Z3 ayl'lo:)oload E!ayl yl!M laued a jo
alnpow aDueualu!ew/lsal dool ZaOW-MZ ayl of pal:)auuo:)uagm
•algnoil azaaa;jo'wlele'/4!nil!suas-;o-lno'Agpuels lewjou:uoll!puo:)
s,Johalap ayl;o uopadsui luelsui ao;sioleDlpui Q31 uaaj6
pue paj albue-ap!m sap!noid sauas Ei ayl•uoipedsuw juelsul
-uo!lejmsgo-loo;-jad lua»ad;o swial u!siohalap E!;oA1!n!l!suas gDJIMs lsal u!-ll!nq
ay1 sAelds!p'aalnap ssalannn e'aQa-SN3S ayl'laued ayl pue alnpow
aanlea;IIeM Z3 e!n 6u!lsal dool
alll le paleDol s(131 Aq palea!pui sl leu6!s s!yl•lo:)olad E!ayl yl!M
Padd!nba laued a of io'aIn ow a:)ueualu!ew sal dool Z 0W-MZ uolleD!pul(331 JoloD lenp'al6ue apM
ayl of paiDauuoa ua4m'leu61s aDueualu!ew alowaa a alejauab luawainseaw k!nll!suas pag!ldw!S
ue:)6ulueap 6u!paau sJohalap E!anM-omi-swiele a:)ues!nu swyl!ao61e 6u!yloows pue uo!lesuadwo:)l}p0
az!w!ulw of au!l E!ayl yl!M piepuels aie swyluoble 6u!yloows
pue uo!lesuadwoa l}up•aDueualu!ew pue bullsal/C!Idwls of bu!leu6!s aoueualu!ew alowaj u!-lpng
sa.nlea;wa6lpalu!;o jagwnu a la}}o saohalap E!•02us6llla;ul jagwego pue aanoa johalap algenowaa
aseq of luawyaelle Vo1 N,dad-dolS
uo!lae_pot
N,doj(]-doiS aIdw!s a l!m aseq a l of u!6nId s eay E!'uo!leIIelsu! 6up!a:)of hasp jo'saxoqlheq
ayl alaldwo:)of-sjoy:)ue llemAip yl!m 6ullunow IDaa!p se Ilam se ajenbs-b'saxogj:)eq bueb-albu!s pue leuo6elDo of slunoW
'spoylaw bu!lunow xoq NDeq;o d1a!aen a salepowwo»e aseq ayl sMaDs SW35 4l!^^sleu!wjal cull-ul
-aseq ayl ap!su!6uu!nn ayl 6upnoa Alleau jo;woa aldwe ap!nad liod tilua anM a6je1
sleu!wjal au!l-u!pue liod Ajlua anon a6jel ayl•speay ayl yl!M
papnpui saseq ayl anon-aid of jallelsw ue snoops slyl•u6isap ui-bnld papnlDul aseq bu!lunow'au!l johalap u!-6n!d
sll pm asea uo!lellelsui saugapai au!l E!ayl•asea uoi�elle;sub Sa,111lpa:l
,uoNDadsui�uoisui pun'aaua6i11a�u.1'asoa
uoiiollo�sui:saIdiauud aaaq� uo papunoj si Xl!woj FI a yl
UoijaajapIouoiIuanuoa ui Jual.uaauonpo Junayiu6is
luasaadaa saoiaa�ap a�ouas sauas_�i sjosuaS walsIfS
SJ043848a 831OWS
�g 2ia43019040yd
rql
'' MWSAS ��
6L43)Smoke Detector Specifications
Architectural/Engineering Specifications
Smoke detector shall be a System Sensor R Series model number listed to Underwriters Laboratories UL 268 for Fire Protection Signaling Systems.The
detector shall be a photoelectric type(Model 2W-B,4W-B)or a combination photoelectric/thermal(Model 2WT-B,4WT-B)with thermal sensor rated at 135°F
(572'C).The detector shall include a mounting base for mounting to 3'h-inch and 4-inch octagonal,single gang,and 4-inch square back boxes with a plaster
ring,or direct mount to the ceiling using drywall anchors.Wiring connections shall be made by means of SEMS screws.The detector shall allow pre-wiring of
the base and the head shall be a plug-in type.The detector shall have a nominal sensitivity of 2.5 percent-per-foot nominal as measured in the UL smoke box.
The detector shall be capable of automatically adjusting its sensitivity by means of drift compensation and smoothing algorithms.The detector shall provide
dual color LED indication which blinks to indicate power up,normal standby,out of sensitivity,alarm,and freeze trouble(Model 2WT-B,4WT-B)conditions.When
used in conjunction with the 2W-MOD2 module,2-wire models shall include a maintenance signal to indicate the need for maintenance at the alarm control
panel,and shall provide a loop testing capability to verify the circuit without testing each detector individually.
Electrical Specifications
Operating Voltage Nominal: 12/24V non-polarized
Minimum: 8.5V
Maximum:35V
Maximum Ripple Voltage 30%peak to peak of applied voltage
Standby Current 2-wire:50 NA maximum average;4-wire:50 NA maximum average
Maximum Alarm Current 2-wire:130 mA limited by control panel;4-wire:20 mA @12V,23mA @ 24V
Peak Standby Current 2-wire:100 NA;4-wire:n/a
Alarm Contact Ratings 2-wire:n/a;4-wire:0.5 A @ 30V AC/DC
Physical Specifications
Dimensions(including base) 5.3 inches(127 mm)diameter;2.0 inches(51 mm)height
Weight 6.3 oz.(178 grams)
Operating Temperature Range 2W-B and 4W-B:32"F-120°F(0°C-49°C);2WT-B and 4WT-B:32°F-100°F(TC-37.8"C)
Operating Humidity Range 0 to 95%RH non-condensing
Thermal Sensor 1357(572°C)fixed
Freeze Trouble 2WT-B and 4WT-B only:41'F(5°C)
Sensitivity 2.5%/ft.nominal
Input Terminals 14-22 AWG
Mounting 3'h-inch octagonal back box
4-inch octagonal back box
Single gang back box
4-inch square back box with a plaster ring
Direct mount to ceiling
N Modes Power Up Sequence for LED Indication
LED Mode Green LED Red LED Condition Duration
Power up Blink every 10 seconds Blink every 10 seconds Initial LED status indication 80 seconds
Normal(standby) Blink every 5 seconds off
Out of sensitivity off Blink every 5 seconds
Freeze trouble off Blink every 10 seconds
Alarm off Solid
Ordering Information
Model Thermal Wiring Alarm Current
2W-B No 2-wire 130 mA max limited by control panel
2WT-B Yes 2-wire 130 mA max limited by control panel
4W-B No 4-wire 20 mA @ 12V,23mA @ 24V
4WT-8 Yes 4-wire 20 mA @ IN 23mA @ 24V
Accessories
2W-MOD2 2-wire loop test/maintenance module RT Removal/replacement tool
SENS-RDR Sensitivity reader A77-AB2 Retrofit adapter bracket,6.6 in.(I6.76cm)diameter
✓, STEMes, OM System S—,
SENSOR hone:8i0-SENSe•St.ax:63 -377- 49 amd sv�fttbnsuracmaa,� meWestwMstsymmwmfor
sdmsee.
Phone:800 SENSOR2•Fax:630 377 6495 N en pad C1fi �S-031d"06.7/0���°^orm�aNa:n�.
A05-0318-006.7/06•N7676
CITY OF SPRING PARK PAGE 1 BUILDING PERMIT
4349 Warren Avenue 07,C->��
Spring Park, MN 55384 ❑ Handout Given
Routed to MNSPECT
Phone: 952-471-9051 Fax: 952-471-9160 ❑ Lead Handout Given JOAUILe d 5
SITE ADDRESS: Tonka,4300,4300 Shoreline Drive,Spring Park,MN 55384 PID:
1)Was the home constructed before 1978?(YES ❑,continue with line 2, NO ❑ continue without completing EPA Section)
2)Will the work disturb>_6 sq ft of interior painted surfaces or>_20 sq ft of exterior painted surfaces?(YES❑go to line 4,NO❑line 3)
3)Are there any windows being replaced?(YES n,go to line 4, NO❑continue without completing EPA Section)
4)Has this home been Certified Lead Free?(YES❑,you MUST Attach Certification Information, NO n complete line 5)
5)EPA Contractor Certification Number. NAT- (applies to contractor only)
! PROPERTY OWNER:TOnka Ventures Address: 102 Jonathan Blvd N #200
cityChaska State:M N Zip: Emaii:cole@cornerstone-mn.com
Contact Name:Cole Buttenoff Phone:612-723-0783
CONTRACTOR: Wellington Security Systems Addres0555 West 78th Street,Ste.H,
City:Edina State:MN Zip:55439 Phone 612-822-4094 Fa012-822-0351
Contractor License No: TS000657 Contact Name:Amanda Nelson Phonef612)822-4094
Email: ADM@wellingtonsecurity.com
ARCHITECT: Address:
City: State: Zip: Phone: Fax:
• Email: Contact Name: Phone:
TYPE OF WORK: ❑New Construction ❑Deck ❑Re-Roof
to Commercial ❑Residential o Change of Use ❑Pool ❑Re-Side
EST.VALUATION OF WORK ❑Finish Basement ❑Retaining Wall ❑Fence
$ 2,985.01 ❑Remodel a Porch ❑Shed
Square feet: ❑Addition ❑Demolition o Window/Door Replacement
❑Garage-Attached/Detach ❑Plumbing-provide detail on Page 2 #being replaced
•• Detailed Description of Work: ❑Accessory Structure ❑Mechanical-provide detail on Page 2 to Misc Other
We will be reconnecting flow and gate valves that were changed out a well as connecting a new riser to the existing DMP XR 150 fire panel.a smoke
• and pull station will be installed at FACP to bring up to code
Signature of this application by the legal property owner or a Ikensed contractor,as the owner's representative,is required and authorizes the Zoning Administrator or designee and the Building official
or designee to enter upon the property to perform needed inspections.Entry may be v tout prior notice.I hereby acknowledge that I have read this application and state that all Information Is true and
correct to the best of my knowledge.I further agree that all workperformed will be In accordance with approved plans,specifications and conditions and to abide by all ordinances of the Municipality
and the laws of the State of Minnesota regarding actions taken pursuant to this permit.I agree to pay all plan review fees even If I choose not to proceed with the work.Penult expires when work
�s is not commenced within 180 days from data Of pafmft,or if work is suspended,abandoned,or not inspected for 180 days.Work beyond the scope of this permit,or work without a permit or inspection,
• will be subject to a penalty.
Noise Ordinance In Effect:MONDAY-FRIDAY Before 7 a.m.and after 10 p.m.Weekends/Holidays before 7 a.m.and after 8 p.m.
SIGNATURE OF APPLICANT: DATE: 06/15/26
PRINTED NAME:Amanda Nelson This is the signature of: ❑ Owner or ®Owner's Representative
OCCUP.TYPE: CONST.TYPE: CODE: BLDG SPRINKLED Yes/No
VALUATION:$
Permit Fee: $ 00 WAC Charge: $
Plan Review Fee: $ ' 1 •l Sewer&Water Hook-Up: $
State Surcharge: $ I Sewer&Water Disconnect: $
Site Inspection Fee: $ Water Meter. $
S.E.C. Fee: $ Muni SE/WA Fee: $
Investigation Fee/Other Fee: $ *2016 SAC Escrow: $2,485
>_ Copy Charge($.25 per8.5 x11 page) $ Other. $
J
zO License Check($5)/Lead Check($5) $ TOTAL DUE: $
W SUB-TOTAL $
fn NOTE:Commercial plans will be submitted to the Met Council Environmental Svcs
D Plumbing Fee(from Page 2) $ for SAC determination. Escrow payment will be required when permit is issued. If
W Mechanical Fee from Page 2) $ after Met Council review no SAC is determined,escrow will be refunded in full.
U
LL Special Conditions/Required Setbacks:
LL
O
Building Approval By: DATE:
Printed Building Ap roval By: ❑ License Verification ❑ Lead Verification-Checked By:
City Approval By: DATE: " '7
Paid:l� Date: Receipt No.l�l1( I` By:
I �—
Jamie Hoffman
From: payment@thepaymentgroup.com
Sent: Tuesday, July 7, 2026 12:14 PM
To: Jamie Hoffman
Cc: payment@thepaymentgroup.com
Subject: MIKE ELDREDGE Permit Payment to Spring Park, MN - Permits & Licenses from TPG
ATTENTION: if you need assistance with this payment, please FORWARD this email to
tpgclientsupport@nuvei.com and include your request. Your client manager will respond.
Dear Spring Park, MN - Permits & Licenses,
MIKE ELDREDGE has made a web Payment through The Payment Group for:
Payment Information
Date Paid: Tuesday, 07 July 2026 12:13:52 CT
Confirmation: MNSA9R
Credit Card Number(last 4 3685
digits):
Credit Card Type: Visa
Full Address- Permit or
Business Payment
First Name Last Name Name City, State & License Amount
Zip Number
5555 WEST
WELLINGTON 78HT STREET,
MII<E ELDREDGE SECURITY SUITE H, 26SP-00055 $199.90
SYSTEMS EDINA, MN
55439
MIKE ELDREDGE can be reached at : 612-822-4094 orAnelson@wellingtonsecurity.com if there
are any questions regarding this payment.
Click here to login to your The Payment Group admin account
Thank you once again for choosing The Payment Group!
1
RECEIPT
City of Spring Park ,.
4349 Warren Ave, Spring Park, MN 55384
(952)471-9051
SPRING PARK
26SP-00055 i Fire Suppression (Commercial) On Lake Minnetonka
Receipt Number:573
Payment Amount: $199.90 July 7,2026
Transaction Method Payer Cashier Reference Number
Credit Card Wellington Security Systems Jamie Hoffman MNSA9R
Comments
Assessed Fee Items
Fee items being paid by this payment
Assessed Fee Item Account Code Assessed Amount Paid Balance Due
On
07/01/26 State Surcharge $1.49 $1.49 $0.00
07/01/26 Commercial Fire Plan Review $78.16 $78.16 $0.00
07/01/26 Commercial Fire Permit $120.25 $120.25 $0.00
Totals: $199.90 $199.90
Previous Payments $0.00
Remaining Balance Due $0.00
Application Info
Property Address Property Owner Property Owner Address Valuation
4300 SHORELINE DR TONKA VENTURES/Cole 102 JONATHONA BLVD N, $2,985.01
SPRING PARK, MN 55384 Buttenoff STE 200
CHASKA, MN 55318
Description of Work
We will be reconnecting flow and gate valves that were changed out as well as connecting a new riser to the existing DMP
XR150 fire panel. a smoke and pull station will be installed at FACP to bring up to code