Loading...
Permits - Permit# SP-2021-00022 - 4421 Lafayette Lane - 1/1/2021CITY OF P, �' Fit(CO,e° City of Spring Park Permit Permit Number: SP-2021-00022 1 Issue Date: 3/12/2021 Zoning Type: RESIDENTIAL 1 Use Type: 1-- ---- - __---..... ......... - ... -- - ............. To Schedule an Inspection Call: 952-442-7520 24 HOUR NOTICE REQUIRED FOR ALL INSPECTIONS MON-FRI: 8AM-4:30PM NO HOLIDAYS Details Site Address_ 24-DAFAYET7E-1ANE,_SP yMN 55384 Description: PLG FOR ADDITION: 3 wc, 4 lav, 1 shower, 3 bathtubs, 1 laundry tub Permit Granted To: GLACIER PLUMBING INC Homeowner's Name: JESSE BERGLAND permit Type: PLG -General (residential) Permit Exp: 9/6/2021 Phone Number: Valuation: $0.00 Parcel#_1911723210040 — Fees-------------- ------ — —---------- —-_ ---- Receipt # Product Sale Date Quantity Date Paid Status Pmt Info Amount 11754 State Surcharge Flat Fee - $1.00 3/10/2021 1.00 3/12/2021 Paid Cash $1.00 11754 PIG - $10 per Fixture over Min 3/10/2021 12.00 3/12/2021 Paid Cash $120.00 Total: $121.00 Notes • This permit is issued in accordance with and subject to all provisions of Ordinances and policies governing building and zoning in City of Spring Park. • Permit Holder/Contractor/Owners Agent is responsible to call for the inspections! • Permit Packet, including approved plan, and this inspection record must be posted in an accessible location before calling for inspection. Maintain this inspection record until work is complete. • No deviations from the approved plans are allowed without prior consent from the building inspections department. • To Owner, Occupant, or Contractor: It is ILLEGAL TO OCCUPY this area/building until all required final inspections have been made, approved, signed, and certificate of occupancy issued! Scott Qualle, Building Official City of Spring Park *4349 Warren Avenue ♦ 55384 Copyright 02021 INSPECTION RECORD 2020 MN State Building Code City of Spring Park Permit Number: SP-2021-00022 Issue Date: 3/12/2021 SITE ADDRESS: 4421 LAFAYETTE LANE, SP, MN SS384 Description: PERMIT TYPE: PIG - General (residential) PLG FOR ADDITION: 3 wc. 4 lay, I shower. 3 bathtubs, I laundry tub ZONE/USE TYPE: RESIDENTIAL APPLICANT: GLACIER PLUMBING INC OWNER: 3ESSE BERGLAND No inspection will be performed, and a re -inspection fee will be charged, if this "Inspection Record", the "City of Spring Park Permit', and, when applicable, the approved plans are not available to the inspector. This permit expires if construction activity does not commence within 180 days from obtaining this permit; when construction activity has been suspended or abandoned for at least 180 days; or the work has not been inspected within 180 days from the last documented activity. IF SEPARATE PERMITS ARE REQUIRED, REFER TO THE "SEPARATE PERMITS REQUIRED FOR:" STAMP ON YOUR APPROVED PLANS/CONSTRUCTION DOCUMENTS TO IDENTIFY WHAT SEPARATE PERMITS ARE REQUIRED. ALL REQUIRED ROUGH -IN INSPECTIONS, NOTED ON SEPARATE PERMITS, MUST BE COMPLETED PRIOR TO SCHEDULING A FRAMING INSPECTION. ALL REQUIRED FINAL INSPECTIONS, NOTED ON SEPARATE PERMITS, MUST BE COMPLETED PRIOR TO SCHEDULING A BUILDING FINAL INSPECTION. DO NOT COVER ITEMS TO BE INSPECTED. Permit Card (4) Plumbing Underground R. I. Required Plumbing Aboveground R. I. Required Gas Line Certification Required Plumbing Final Required MUST CALL TO SCHEDULE NO LATER THAN THE BUSINESS DAY PRIOR TO THE INSPECTION DAY: 8:00 A.M. TO 4:30 P.M. MONDAY THRU FRIDAY. PHONE NUMBER TO CALL: 952-442-7520 When a Certificate of Occupancy is needed, return this card and the approved final inspection notice to the City of Spring Park office. Thank you for your Payment! Transaction ID: 11754 Transaction Number: Cash Transaction Type: Payment Recipient: Contractor Notes: Fees CITY OF MINNESOTA City of Spring Park 4349 Warren Avenue SP MN,55384 Ph: 952-442-7520 $121.00 Date: 3/12/2021 Method: Cash Address: 4421 LAFAYETTE LANE, SP, MN 55384 Reference: Permit Number: SP-2021-00022 Type: PLG - General (residential) for GLACIER PLUMBING INC State Surcharge Flat Fee - $1.60 - Paid" `.1.00"- $1:00 $1.00 PIG - $10 per Fixture over Min Paid 12.00 $120.00 $120.00 Total Amount: $12f.00 Page 1 of 1 Printed on: 3/12/2021 CITY OF SPRING PARK PAGE 1 BUILDING PERMIT S?".loa I" cno 4349 Warren Avenue 0 Handout Gam' Spring Park, MN 55384 RouW to k4NSPECT Phone: 952-471-9061 Fax: 952-471-9160 0 Lead Handout Ghv, e__At4a Itd, 346 -al ADDRESS: ` q Pm blEL 1) Was the home constructed before 19787 with the 2. NO o con cruse without corrlpletirg EPA Section) 2) Will the work disturb 4 sq R of interior painted surfaOes or t20 sq fl of exterior painted suAaces? (YES u go to line 4. NO c+ the 3) 3) Are Bhere any windows being replaced? (YES u. go to line 4. NO ❑ continue without com*tinlg EPA Section) ) Has an home been Certifled Lead Free? (YES c. you MUST Atbclh Certifxakon Information. NO ❑ complete the 5) 5) EPA Contrador Certification Number. MAT - (aN ties to contractor only) PROPERTY OWNER: t 1 ss: k S1ate: &Al Zip-' Emait Contact Name: Y,4Vfff. lKUA 7 Z Phone: CONTRACTOR: , Address: Fax: city State: ZjP7 Phone: Contractor Dense No: Contact Name: Email: ARCHITECT: Address: L" QW State: zip: Phone: µ Contact Name ,Phone: Email: n TYPE OF WORK: ❑ New Construction a Deck ❑ Re -Roof o Corninercial JResidential ❑ Change of Use [IPool = ❑ Re -Side OF WORK ❑ Finish Baseent ❑ Few EST. VALUA m g to) - ,Remodel ❑ Shed Replacement Square feet: ❑Addition �� ❑ Vlfiridoru0ar 7 � PWmDu '� caret on Vage 2 0beehg replaced Detailed Deser4Wo n o! Wbrk: ❑ Aocessci r d❑ Mechanicaljxo•+ac dew on � 2 ❑ Misc Other d nor epD= I wive i prmoq o mw w* �d=Retw• as ve ii, repmw=a- a rspraee elm aeTam er �+0 or dasoVe SM oea daahvee tc wem us v+ the papory m p�m neeasa Moan. ErOy crsY oa. t ruroca. t l aw I hmrs re00 eft ay�kx�m ara arse arcs asr a aue eno to Ve Oasf d mp krona. r tta trrr agree out as what 0�pscoeeerres W= apSspiam ana tona:aorn er+o m oIDe. h m p d 9vw kaWtic4eLdy aeams � Dam 0*b P rcia l ewes to pep as pun rsaAae isas ewwr it 1 Moores col to p►OOaoO UM Efe wort Paao9 — eerwi erork Oro tmea of Ora Sys of 6CmaPi s M cacmw sea WCM ISO cap [tarn �! on tai awJk pm0ad . v tors mr tor) oc/a. Waal ogorar Ow crape d tr+® Demur v svt silJoit s owm3 v a avecovr be- to a pullm, Hobe OrtfinarlM FFNDAY Before 7 am. and after 10 pm. W atlw%ofifta before 7 am. and after 6 p.m. { : SMATURE OF DATE P1�7 - IVAM M; This Is tho signatlme of: o Owner or zz Owners R�resentative OCCtp. CONST. TYPE: CODE: BLDG SPRINKLED Yes / No VALUATION Permit Fee: S WAC Charge: S Plan Review Fee: S Sewer & Water Hook4Jp: S State Surcharge: $ Sewer & Water Disconnect: $ Site Inspection Fee: S Water Meter. $ S.E.C. Fee: S Muni SEIWA Fee: $ Investigation Fee / Other Fee: $ ' 7016 SAC Escrow. Sa 485 y Copy Charge ($.25 per 8.5 x11 page) S Offer. $ TOTAL tom: S t70 CLmense Check (S5)1 Lead Check 45) $ Uj SUB -TOTAL S .NOrc: C phem oiu be sad to CO alas Canoes Enwbor h SVCS Phanbing Fee (from Page 2) $ 6) i • o(Z m. saC Eavow Pmsmer•borsgrerea.men is baand. a ca W Mechanical Fee from 2 S char mot Co ~n ea.iew no SAC is deterads escrow will be d inf� u, Special Conditions./Required Setbacks: O Buikfin9 Approval By: DATE: Printed Bku7dueg Approval By: D License Verffcation ❑ Lead Verification - Checked By: City Appmal By: DATE: Paid: �'��$ iv Date: 3"'/ t3 a I Receipt N . 117 5 �" CITY OF SPRING PARK 0 MECHANICAL PERMIT 0 PLUMBING PEffiff PAGE 2 FOR PERMIT ISSUANCE PAGE i and PAGE 2 should be complete MECHANICAL INFORMATION biAedu Contractor. Address: State- ry: Phone: Fax: toBond No: lContact Name: te lContact Phor*7 l: Detailed DescrWOon of Work: will be installing Indicate type of project, fixtures, and Gas Lines you will be 111�11�01 or replacing (include count for each type' kfbdure): AffECHANICAL FWTURES GAS Quarift Cmantity Furnace Kitchen Fan Air Conditioning System Bath Fan Chmilithy Furnace Fireplace Air Exchanger Grill Unit Heater Fireplace Water Und Heater Floor Heal Grill In Gas Lon • Replacement (one fixture only, no piping or vent changes) N I Perm d Fee: $ Fee- $ • Addition(Rernodel Gas Line Permit State Surcharge: $ I] New Constru;dion Other. S 0 Other Total Mechanical Pe"nit S PLUMBING !NFORMATION 1, UNLMa 11 ct A TE_ Addr.. Phone. 7ZeL5-q5-/9nFax: City: Me: Plumbers License No: \N State Bond No: -v�\ 867 - E 719 Contact Name: SeLhe— n 1Contact Phone: (z 3 , , 'Z'. Email.- <1 — 14 A U Debited Descof Work: Indicate type of project and fixtures you will be installing or replacing (include count for each type of fixture): pLLwWNG FVfTURE3 cmntltv Shover Water Heater Laundry Tub c Gas 0 Electric Dishwasher Rough -In Future Fixture Water Softener Clothes Washer Sump Lawn Sprinkler System Ice Maker Line Water PwinQ System Water Closet (Toilet) Hose Sib Floor Drain (Wash Basin) :1138891tuborate Use ow 00 0 Replacement (one fixture only, no piping or vent changes) Plumbing Permit Flee: $ State Surcharge $ 00 AddftrLfReffKKW Other $ o New Construction Total Plumbing Permit ai. 0 S j0 0 Other COPY PHONE: 952-442-7520 7MNSPECTLC FAX: 952-442-7521 HELPING YOU COMPLY WITH �THZ, -rx7 EMAIL: INFO@MNSPECT.COM RESIDENTIAL PLUMBING ➢ This handout is intended only as a guide. It shall not be considered a complete set of requirements. ➢ Materials and installation must comply with the current Plumbing Code, Section R403.4 of the MN Residential Energy Code, and the manufacturers' installation specifications for each product. ➢ Multiple fixtures may be included on the same plumbing permit, provided that they will be ready for inspection at the same time. Residential plumbing permits can be issued over the counter at the municipality office. Commercial projects require a plan review. Please request a Commercial Plumbing Permit Application from your municipality office. ➢ MN Statutes 32613.46 states: "Anyone not so licensed may do plumbing work which complies with the provisions of the minimum standards prescribed by the Plumbing Board on premises or that part of premises owned and actually occupied by the worker as a residence, unless otherwise forbidden to do so by a local ordinance." This means, as the owner of a one- or two-family dwelling, you can either hire a licensed plumbing contractor or do the plumbing work yourself without a license. A friend, neighbor, tenant, general contractor, or other person cannot legally do the plumbing work unless he or she is a licensed plumber working on behalf of a licensed plumbing contractor. POSTED prior to start of work - VISIBLE from street or driveway - ACCESSIBLE to the inspector Inspections MUST be scheduled during office hours AT LEAST one business day prior to inspection. If a specific date and time is required, additional notice may be needed. Failure to cancel a scheduled inspection may result in a reinsoection fee. o Office Hours: Monday - Friday • 8:00 a.m. - 4:30 p.m. o Phone: (952) 442-7520 or (888) 446-1801 Inspections (required inspections are dependent on the project type): o Someone 18 years or older must be present at the time of the inspection. o The person doing the work should verify that required tests will hold prior to scheduling. o Rough -in: After all drain, waste, and vent (DWV) and water supply piping is installed and before placing any fixtures. Refer to Project Checklist section of this handout to determine what will be inspected at the rough -in. You must conduct a pressure test on all new (DWV) lines. ✓ Test pressure shall be no less than 5 psi. ✓ Test duration shall not be less than 15 minutes. o Final: After all work is complete. You must conduct a final manometer test on DWV lines and fixtures at time of final inspection. ✓ Test shall be by means of air introduced into the system equal to the pressure of 1" water column. NOTICE: Construction or work for which a permit is required shall be subject to inspection by the Building Official, and such construction or work shall remain accessible and exposed for inspection purposes until approved. It is the responsibility of the permit applicant to be in attendance on site and provide access to the Building Official for all required inspections. If work is concealed and/or work is not complete at time of inspection, an additional inspection is required and a reinspection fee may apply. Note: The State of Minnesota requires all residential building contractors, remodelers, roofers, plumbers, and electricians to obtain a state license, unless they qualify for a specific exemption. Any person claiming an exemption must provide a copy of a Certificate of Exemption from the Department of Labor & Industry to the Municipality before a permit will be issued. Note: To determine contractor requirements, or to check the licensing status of a contractor, please call the Minnesota Department of Labor & Industry at 651-284-5065 or toll free 1-800-342-5354. Note: For specific code requirements, contact the Building Inspection Department at 952-442-7520 or 888-446-1801 or e-mail: info@mnspect.com. Residential Plumbing Handout Page 1 of 3 Copyright © MNSPECT 2020, Rev. Nov 2020 Inspected during rough -in inspection: ❑ All proposed fixtures must be trapped and vented separately. A vent pipe cannot be run horizontally until it is 6" above the spill line of the fixture it serves. The spill line is the top of the fixture where the water would overflow to the floor. ❑ A trap arm is the pipe between the trap and its vent/drain connection. The trap arm of a fixture may have one long turn 90-degree fitting, or two 45-degree fittings before the vent. The maximum length of trap arms are 42" for 1'/2" pipe and 60" for 2" pipe; 48" for a toilet. ❑ Between the trap and the vent for the fixture you cannot wye, or tee off, to add another fixture. This must be tied on separately, after the vent into the drain line, with its own vent. ❑ ABS pipe (black) and PVC (white) cannot be glued together. You may use an approved mechanical joint, typically called a "mission coupling." It must have a smooth stainless -steel shrouds►hen used above ground." ❑ When using PVC (white pipe) you must use a contrasting colored primer before gluing the joints. ❑ All drainage lines underground must be a minimum 2", and installed below -the -concrete - NOTE embedded in it. ❑ Drainage pipes must be connected with a wye fitting, not a tee, on a horizontal to horizontal drain pipe. A tee fitting may only be used when going from a horizontal position to a vertical downward position, or on its back as a vent. ❑ All drainage fittings must be of the long turn or 45-degree style unless going 6 horizontal to vertical position - then a tee or medium turn 90-degree fitting may be ❑ The horizontal drain line from kitchen fixtures must be continuously supported for its entire length. ❑ If you will be drilling and notching a top plate at exterior,'wall or: interior�load-bearing wall by more than 50% of its width, a galvanized metal tie not less than-054�hick and;/z" wide shall be fastened across and to the plate at each side of the opening with/not-less,than eightp10d nails, minimum length of 1'/2". The metal tie must extend a minimum of 6 pastthe opening on\each side. ❑ An air test of 5 psi must be done at the tim fof'inspection of the new drains and vent piping. The air test must hold for 15 minutes. To do this, youmus`eap off all openings of the new plumbing system and put an air pressure gauge on one of the plpe`openings (usually the sink drain). ❑ Three fixtures are permitted on a 1XI' water supply line if they are in the same room (tub, toilet, lav). Two fixtures are allowed on a'/2�,/Water supply line if they are in different rooms. So if you are adding a new bathroom the water supply/ must,be;teed:off from a minimum W water line. ❑ New or replacement shower valves -must be anti -scald and pressure -balanced. (Most 2-handle tub/shower valves do not meet this requirement, and will need a mixing valve or other anti -scald device.) ❑ All plastic pipe and copper,pipe must-be'rotected with a nail protection plate when the pipe is within 1'/4" of the nailing surface of a -stud, or top or bottom plate it passes through. ❑ Minimum drain size-fora.toilet,is 3 shower or washing machine, 2"; lav, bar sink, laundry tub or bathtub, 1'/z". ❑ Minimum vent size:for a16ilet='is 2 shower, bathtub, washing machine, laundry tub, lav, or bar sink, 1'/2". El Plastic pipe.supports*for horizontal piping are required at 32" intervals (no wires or metal straps on plastic pipes\� El Trap seal must be 2" min�iMum to 4" maximum. ❑ Laundry stand') \_ must be between 18" and 42" above the trap. ins ectea,vuring tmar inspection: ❑ Water heaters must have a %" shut-off on cold side inlet (no other tees between water heater and shut- off valve). Temperature/Pressure Relief valve drain (TPR) must be piped to a maximum of 18" from floor, and not be reduced from %" outlet. ❑ Gas piping: Use an approved gas valve (must replace old brass handles with new valves). Must have union between gas valve and fixture. Gas valve must be within 6' of appliance and in the same room. The sediment trap (dirt "T") must be a minimum 3". ❑ The system must pass a manometer test equal to the pressure of 1" water column. ❑ The dishwasher drain hose must be secured to the underside of the counter with a loop as high as possible, or have an air gap. ❑ All fixtures must be sealed to the floor or countertop. ❑ Gas lines shall be labeled. ❑ If CSST gas piping is being used, it shall be bonded with solid copper wire on the supply side of the tubing. ❑ See diagrams on the following page for examples of a waste and vent system. Residential Plumbing Handout Page 2 of 3 Copyright © MNSPECT 2020, Rev. Nov 2020 Vent Trap Arm �J Toilet Horizontal vent 6" above spill line Residential Plumbing Handout Page 3 of 3 Copyright © MNSPECT 2020, Rev. Nov 2020 �'--?-MNS rtti HELPING YOU COMPLY WITH THEE EO PHONE: 952-442-7520 FAX: 952-442-7521 EMAIL: INFO@MNSPECT.COM NOTICE This notice is to be given to the homeowner The improvements undertaken at this property require the inspection of properly installed smoke alarms and carbon monoxide alarms, as required by MN Statute 299F.362, 299R.51, and in accordance with NFPA 72 and MN Residential Code (MRC) R314 & R315. This notice is intended to inform the homeowner of the requirements at the beginning of the project in an effort to minimize any inconvenience and/or cost associated with an additional inspection if the work described in this handout is not completed before the final inspection. The guidelines below are to assist you in completing the require installation. For questions please call MNSPECT at 952-442-7520 or 888-446-1801. REQUIREMENTS FOR SMOKE & CARBON MONOXIDE ALARMS ➢ This handout is intended only as a guide. It shall not be considered a complete set of requirements. ➢ Materials and installation must comply with the current Minnesota State Building Code and the manufacturers' installation specifications for each product. SMOKE ALARMS: Smoke alarms are required: • MN Statue 299R.662 requires smoke alarms installed in every residential dwelling in Minnesota. Each dwelling until must be provided with UL 217 listed smoke alarms installed in accordance with NFPA 72 and MRC 314. (Combination smoke and carbon monoxide alarms are permitted in lieu of smoke alarms and must be listed UL 217 and UL 2034.) Smoke alarms must be installed: • In each sleeping room. • Outside AND within the immediate vicinity (within 21' per NFPA 72) of each separate sleeping area. • On each additional story of the dwelling including basements and habitable attics. Installation requirements: • Smoke alarms shall be installed not less than 3' horizontally from the door or opening of a bathroom that contains a shower or tub unless this would conflict with other placement requirements such as minimum distance from a bedroom. • Ionizing alarms shall not be installed closer than 20' to a cooking appliance. Ionization alarms with a silencing switch may be placed no closer than 10' to a cooking appliance. • Photoelectric alarms shall not be installed closer than 6' to a cooking appliance. • Wall mounted alarms should be located inside an area not more than 12" and not less than 4" from the ceiling (or per the manufacturer's requirements). • Ceiling mounted alarms should be no closer than 4" from a side wall or peak of a vaulted ceiling. Smoke and CO Alarms Handout Page 1 of 2 Copyright © MNSPECT 2020, Rev. April 2020 • Alarms must be more than 36" from the tip of a ceiling fan blade, forced air supply register, or door to a bathroom that contains a tub or shower. • Smoke alarms shall not be installed within a 36-inch horizontal path from the supply registers of a forced air heating or cooling system and shall be installed outside of the direct airflow from those registers. • Alarms should be mounted on an interior wall. • Alarms should be mounted away from windows and exterior doors. Interconnection: , • Where more than one alarm is required to be installed, the devices shall be interconnected either by physical interconnection, or by a wireless interconnection. ; ", Exception: Interconnection is not required in existing areas where the alterations,'or-repairs do not involve the removal of interior ceiling or wall finishes exposing the structure./ - Power Source: • Smoke alarms shall receive their primary power from the building wiring,&shall have a battery backup. Exception: 7 o Battery operated alarms shall be permitted in buildings without -,commercial power. o Alarms in existing areas shall be permitted to be battery operated when the -alterations or repairs do not involve the removal of the interior ceiling -or wall finishes exposing the structure. ➢ Smoke alarms should be replaced every 10 years (or per ma nuf6c turer's instructioons). ➢ Smoke alarm batteries should be changed every year. CARBON MONOXIDE ALARMS: ' Carbon monoxide CO is a silent killer. It is a oisonous,ecolorless, odorless, and tasteless as produced by lr burning gasoline, wood, propane, charcoal, or other fuel.-Imprope`rly�ventilatted appliances and engines may allow carbon monoxide to accumulate to dangerous`levels. Large amounts of CO can overcome you in minutes without warning. Carbon monoxide alarms are required: ` O • MN Statue 299R.51 & MRC R315 require carbon monoxide alarms to be installed in every residential dwelling that: �%-'� o Contains a fuel -fired appliance, -and/or v o Has an attached garage that communicates with the dwelling unit. Carbon monoxide alarms sliall-be listed UL 2034. (Combination smoke and carbon monoxide alarms are permitted and must -be Iisted,UL 217 and UL 2034.) Carbon monoxide alarms must'be installed:/ • Outside and within 10' of every sleeping room. • On each level,containing, a sleeping room. • Inside each sleeping -room -where that room or an attached bathroom contains a fuel -fired appliance. e than,one alarm is required to be installed, the devices shall be interconnected either by erconnection, or by a wireless interconnection. ilon` Interconnection is not required in existing areas where the alterations or repairs do not the'removal of interior ceiling or wall finishes exposing the structure. shall receive their primary power from the building wiring & shall have a battery backup. Battery operated alarms shall be permitted in buildings without commercial power. Alarms in existing areas shall be permitted to be battery operated when the alterations or repairs do not involve the removal of the interior ceiling or wall finishes exposing the structure. ➢ Carbon Monoxide alarms should be replaced every 6 years (or per manufacturers instructions). ➢ CO alarm batteries should be changed every 6 months. Smoke and CO Alarms Handout Page 2 of 2 Copyright© MNSPECT 2020, Rev. April 2020