Loading...
Permits - Permit# SP-2021-00011 - 4750 West Arm Road - 3/15/2021O City of Spring Park Permit 1 ci rr OF r "PA R K To Schedule an Inspection Call: 952-442-7520 Details Permit Number: SP-2021-00011 Issue Date: 3/15/2021 Zoning Type: RESIDENTIAL Use Type: IRC-3 24 HOUR NOTICE REQUIRED FOR ALL INSPECTIONS ♦ MON-FRI: 8AM-4:3013M * NO HOLIDAYS Site Address: 4750 WEST ARM ROAD, SP, MN 55384 Description: Remodeling upstairs bed/baths, non load bearing partition walls, alterations. All new fixtures8inishes Permit Granted To: Massey Berg, LLC Homeowner's Name: PATRICIA ADAIR TIMBERG Phone Number: Parcel #: 1811723330013 Fees (4) Permit Type: BLDG - Remodel, Small Residential Permit Exp: 8/24/2021 Valuation: $47,000.00 Receipt A Product Sale Date Quantity Date Paid Status Pmt Info Amount 11769 License Lookup 2/25/2021 1.00 3/15/2021 Paid Check: 051 $5.00 11769 State Surcharge 2/25/2021 1.00 3/15/2021 Paid Check: 051 $23.50 11769 —Permit Fee 2/25/2021 1.00 3/15/2021 Paid Check: 051 $791.25 11769 Plan Review Fee 2/25/2021 1.00 3/15/2021 Paid Check: 051 $514.31 Total: $1,334.06 Notes • This permit is issued in accordance with and subject to all provisions of Ordinances and policies governing building and zoning in City of Spring Park. • Permit Holder/Contractor/Owners Agent is responsible to call for the inspections! • Permit Packet, including approved plan, and this inspection record must be posted in an accessible location before calling for inspection. Maintain this inspection record until work is complete. • No deviations from the approved plans are allowed without prior consent from the building inspections department. • To Owner, Occupant, or Contractor: It is ILLEGAL TO OCCUPY this area/building until all required final inspections have been made, approved, signed, and certificate of occupancy issued! ME / Scott Qualle, Building Official City of Spring Park +4349 Warren Avenue ♦ 55384 Copyright 02021 INSPECTION RECORD 2020 MN State Building Code �� U City of Spring Park Permit Number: SP-2021-00011 Issue Date: 3/15/2021 SITE ADDRESS: 4750 WEST ARM ROAD, SP, MN 55384 Description: PERMIT TYPE: BLDG - Remodel, Small Residential Remodeling upstairs bed/baths. non load bearing partition walls. alterations. ZONE/USE TYPE: RESIDENTIAL IRC-3 All new fixtures/finishes APPLICANT: Massey Berg, LLC OWNER: PATRICIA ADAIR TIMBERG No inspection will be performed, and a re -inspection fee will be charged, if this "Inspection Record", the "City of Spring Park Permit", and, when applicable, the approved plans are not available to the inspector. This permit expires if construction activity does not commence within 180 days from obtaining this permit; when construction activity has been suspended or abandoned for at least 180 days; or the work has not been inspected within 180 days from the last documented activity. IF SEPARATE PERMITS ARE REQUIRED, REFER TO THE "SEPARATE PERMITS REQUIRED FOR:" STAMP ON YOUR APPROVED PLANS/CONSTRUCTION DOCUMENTS TO IDENTIFY WHAT SEPARATE PERMITS ARE REQUIRED. ALL REQUIRED ROUGH -IN INSPECTIONS, NOTED ON SEPARATE PERMITS, MUST BE COMPLETED PRIOR TO SCHEDULING A FRAMING INSPECTION. ALL REQUIRED FINAL INSPECTIONS, NOTED ON SEPARATE PERMITS, MUST BE COMPLETED PRIOR TO SCHEDULING A BUILDING FINAL INSPECTION. DO NOT COVER ITEMS TO BE INSPECTED. Permit Card (4) Framing Required Wallboard (Fire -Rated Assemblies) Required Insulation Required Final Required MUST CALL TO SCHEDULE NO LATER THAN THE BUSINESS DAY PRIOR TO THE INSPECTION DAY: 8:00 A.M. TO 4:30 P.M. MONDAY THRU FRIDAY. PHONE NUMBER TO CALL: 9S2-442-7520 When a Certificate of Occupancy is needed, return this card and the approved final inspection notice to the City of Spring Park office. CITY OF SPRING PARK PAGE 1 BUILDING PERMIT 4349 Warren Avenue SP-2021-00011 Spring Park, MN 55384 O H'nIMK QMM Rouled to MNSPECT Phone: 952-471-9051 Fax 952-471-9160 El Load Handout ok*n SITE ADDRESS: 41va ? ( T PtiD` O was the home txxnseructed before 1978? (YES a, continue with One 2. McKgontinue vithout eomplsoM EPA section) 2) Wtii the work dbAxb k$ aq ft of interior pairllbd sur(sces or 22A sq ft of axtarlor palled surfsoss? (yu o•go b kw 4. NO o tins 3) . 8) Ara two any wkdowa being npa:od7 (YES a, go to One 4. NO a Continue wOtqut compleWg EPA Section) 4) Has this home been Certified Lead Free? (YES a, you MUST Attach Certllloodon Irrbnnetion. NOpecompleb line 5) EPA OonAecior Certlllcation Number NAT - T_-Z G' 2Z E) ` (oppose to contractor only) PROPERTY OWNER: P68,]✓�k Address - . lrp �- i Emati: jJ a ei i C b Contact Name: Phone: Z 2 (nY 2, CONTRACTOR a S e &_LjAddress 4 2-L o d e S4_ Stab: /J o Phone: -7 fd ContrIRSIM L.kmm Ift R TS-0 { Contact Name• ( v s Emma: V*-, L5 S w. ,t. 6 b " ARCHITECT: a4a V f Address: stote Phone' Foc Email: Contact Name' Phone: OF WORK: o New Con@&ucdon a Dad o Re -Root 0 Commercial Residsnds1 a CherlDe of Use a Pod n Ra EST. VALUAT OF WORK a Fim nkh Beseent a Retaining Wall o Fans !s: I)� J_ a Porch a Shed Square feet a Addition o Derno lim o WindowlDoor Rrrpleoemwit In GomQo4ftohe&Dstach a PlumbhlQ- *M6 dear on Pop 2 d being replaced DstaRed per d Work o Struc4ae a ddm1*nPep2 a Misc Otw a1t,eV-A_1(,-,Yxe,U uvwkn d ft apore•- aaI , u wa ewnarb npwnrn., is eiquyad and aWwnar fr ZanMp MN�Yraear «dr jaw nd •r suN� or dnWw to ~ Wm>tw popdy to po kme awdad ynpadbna. Oft my M w wd pw swift I hrabp mn wad tlr, approadm and dM@ #a ar efaaadlon Y bua and wind b fwbut d Ily biaa/adra Mery epee f W d w«k performed vA b in aooadanoa VAh aPpv+ad pbm apadlio�e�• wd cmdrfwr rd b.61d.0y d «dYrnow dM Yuriagar and ti bwe dM SYIa d Mnluda npra�p Man Wan p rmmd to rd1 pamiL 1 ww to Pw an pan wrbw has wan If I dm" eat to pepN wrh Se wdc Panai aipYM ohm wade • nd mwarwW MM 1a0 days ion dab d pamR «rook jsauipndad abandorw O. «not tiPWW br 100 dsw WO* Myad •w soopa d m pma «w«k Mho. a er M u6jed b a ponailr Pall ° Noise Ordhmmm In Effect Y - Y Before 7 a m. and~ 10 PAL Waabnd•Mordaya before 7 a.m. and alter a pwl. WNATURE OF APPLICANT• DATE: 2/ r 7 'LA PRINTED NAME••p�,/1 a This Is the d: Or o Ownerls Rep dallys OCCUP. TYPE: I RC-3 CONST. TYPE: I CODE: 2U2UMKU BLDG SPRINKLED Yes / No vALUAnoN: s 47,000 Permit Fee: i 791.25 WAC CNwp: i Plan Review Fes: i 514.31 Sewer & Water Hook -Up: i State Surcharge: i 23.50 Sewer & Waller Disconnect i Site Inspection Fes: i Water Meter. i S.E.C. Fee: i Muni SEANA Fee: $ Investipatlon Fee / Other Fee: S *2016 SAC Escrow.. S2.485 Copy Chefgs ($25 Per 8.5 xi peps) i Other i License Check (is) / Load chock (is) S 5.00 TOTAL DUE: S SUB -TOTAL. -TOTAL.# 1334.06 Plumbing Fee (from Pogo 2) $ •No>�: r:amlaew �r.e. w fw wlbnda.d a ola Ir.e comer wlaree..l+us sV= row tic aManalarla. eww■ PWPN tea be nqulmd odes rlarere M ba " a Mechanical Feb Pa 2 i oar Yd Connor rahl.ar m SAC r eataradrwd, ewes, wN he nAelded In M. Special CorididwaRaciuked Sefbadw Building Approval BY AlfDATE: 02/24/2021 Printed BuikiMg Ap0qVal By Kastern O License vertiicalion O Lead Vedfcation - Checked W. Chy Approval By PATE: Paid: Dab: /5—a Recelpt No. C4(KO D S BY OF ::::: e�'z SPRING PARK On Lake 94innetonka February 24, 2021 Permit Number: SP-2021-00011 Project Name: Massey Berg LLC 2224 Goodrich Ave St. Paul, MN 55105 Scope: Residential Code Review of remodel in the second floor of a multi -home building located at 4750 West Arm Rd. Inspections: All work shall be inspected. It is the responsibility of the contractor/installer to contact the Department of Building Safety, when ready to schedule an inspection, at (952) 442-7520 between the hours of 8:00 a.m. and 4:30 p.m., Monday through Friday. The plans and specifications for the project named above have been reviewed for substantial compliance with the current Minnesota State Building Code. The review is limited to the submitted scope of work and is based upon the supposition that the data on which the design is based are correct, and that the necessary legal authority has been obtained to construct the project. The responsibility for the design of structural features must be taken by the project designer. Any changes from the submitted plans and specifications shall be reviewed and approved by the Department of Building Safety. Approval is based on the correction of all noted deficiencies and compliance with all applicable items listed below. The following information is related to the submitted plans/scope as general information and/or code compliance requirements. Compliance with the stated requirements shall be verified during the construction process. Any changes to the plan and any required additional information shall be provided to this agency for code -compliance review and approval, prior to its installation. General Information: 1. Applicable Codes: a. 2020 MN Residential Code (MRC) (2018 IBC as amended) b. 2020 MN Special Provisions (MSP) c. 2015 MN Energy Code (MREC) (2012 IECC as amended) d. 2020 MN Mechanical Code (MMC) (2018 IMC as amended) e. 2020 MN Fuel Gas Code (MFGC) (2018 IFGC as amended) f. 2015 MN State Plumbing Code (MPC) (2012 UPC as amended) g. 2020 MN Electrical Code (MEC) (NFPA 70) 2. Separate permits are required for: a. Electrical b. Mechanical c. Plumbing 3. The field inspector may identify additional code compliance requirements. identified code compliance requirements shall be completed. Any additional Specific Code Items to Be Addressed During Construction: 1. Required clearance of 24-inches in front of the toilet to the shower is not met. Adjust fixtures accordingly. 2. Safety glazing is required on bathroom windows. 3. Ventilation is required in the bathrooms. 4. See approved plan and items listed below. The below items are commonly missed items that require correction following inspections. These are provided for your benefit and may or may not apply specifically to your project. MN Residential Code: 1. Bathrooms, water closets compartments, and other similar rooms shall be provided with aggregate glazing area in windows of not less than 3 square feet, one-half of which must be openable. (MRC R303.3) a. Exception: The glazed area shall not be required where artificial light and a local exhaust system are provided. The minimum local exhaust rates shall be determined in accordance with Section M1507. Exhaust air from the space shall be exhausted directly to the outdoors. 2. Habitable space, hallways, bathrooms, toilet rooms, laundry rooms, and portions of basements containing these spaces shall have a ceiling height of not less than 7 feet. The required height shall be measured from the finished floor to the lowest projection from the ceiling. (MRC R305.1) a. Exception: Bathrooms shall have a minimum ceiling height of 6 feet 8 inches at the center of the front clearance area for water closets, bidets, or sinks. The ceiling height above fixtures shall be such that the fixture is capable of being used for its intended purpose. A shower or tub equipped with a shower head shall have a minimum ceiling height of 6 feet 8 inches above a minimum area 30 inches by 30 inches at the showerhead. 3. Bathtub and shower floors and walls above bathtubs with installed shower heads and in shower compartments shall be finished with a nonabsorbent surface. Such wall surfaces shall extend to a height of not less than 6 feet above the floor. (MRC R307.2) 4. Glazing in walls, enclosures or fences containing or facing hot tubs, spas, whirlpools, saunas, steam rooms, bathtubs, showers, and indoor or outdoor swimming pools where the bottom exposed edge if the glazing is less than 60 inches measured vertically above any standing or walking surface shall be considered a hazardous location. This shall apply to single glazing and all panes in multiple glazing. a. Exception: Glazing more than 60 inches measured horizontally and in a straight line, from the waters edge of the bathtub, or whirlpool, or from the edge of a shower. 5. Smoke alarms shall be installed in the following locations: (MRC R314.3) a. In each sleeping room. b. Outside each separate sleeping area in the immediate vicinity of the bedrooms. c. On each additional story of the dwelling, including basements and habitable attics but not including crawl spaces and uninhabitable attics. In dwellings or dwelling units with split levels and without an intervening door between the adjacent levels, a smoke alarm installed on the upper level shall suffice for the adjacent lower level provided that the lower level is less than one full story below the upper level. 6. Carbon monoxide alarms shall be installed outside and not more than 10 feet (3048 mm) from each separate sleeping area or bedroom. Alarms shall be installed on each level containing sleeping areas or bedrooms. (MRC R315.1.1) 7. Buildings shall have approved address numbers, building numbers or approved building identification placed in a position that is plainly legible and visible from the street or road fronting the property. These numbers shall contrast with their background. Address numbers shall be Arabic numbers or alphabetical letters. Numbers shall be a minimum of 4 inches high with a minimum stroke width of 1/2 inch. (MRC R319.1) MN Energy Code: 1. All exhaust, supply, and return air ducts and plenums shall be insulation according to Table R403.2.1. (MREC R403.2.1) a. Insulation is only required in the conditioned space for a distance of 3 feet from the exterior or unconditioned space. b. V means the vapor retarder in accordance with IMC Section 604.11 c. W means an approved weatherproof barrier. TABLE R403.2.1 MINIMUM REQUIRED DUCT AND PLENUM INSULATION Duct Type/Location Duct Type/Location Exterior of building R-8 V and W Attics, garages, and ventilated crawls aces R-8 and V Exhaust ducts within conditioned Ispaces R3.3 and V 2. Ducts, air handlers, and filter boxes shall be sealed. (MREC R403.2.2) 3. Building framing cavities shall not be used as ducts or plenums. (MREC R403.2.3) 4. Insulation for hot water pipe with a minimum thermal resistance (R-value) of R-3 shall be applied to the following: a. Piping larger than 1/4-inch nominal diameter. b. Piping from the water heater to kitchen outlets. c. Piping located outside the conditioned space. d. Piping from the water heater to a distribution manifold. e. Piping located under a floor slab. f. Buried piping. g. Supply and return piping in recirculation systems other than demand recirculation systems. h. Piping with run lengths greater than the maximum run lengths for the nominal pipe diameter given in Table R403.4.2. All remaining piping shall be insulated to at least R-3 or meet the run length requirements of Table R403.4.2. Mechanical Code Items: 1. Mechanical ventilation requires a minimum exhaust rate of 50 cfm in toilet rooms and bathrooms. (MMC 403.2.1) 2. The air removed by every mechanical exhaust system shall be discharged outdoors at a point where it will not cause a nuisance and not less than the distances specified in IMC Section 501.3.1. The air shall be discharged to a location from which it cannot again be readily drawn in by a ventilating system. Air shall not be exhausted into an attic or crawl space and the exhaust system shall be equipped with a backdraft damper at the point of discharge. (MMC 501.3) 3. The termination points of exhaust outlets and ducts discharging to the outdoors shall be located with the following minimum distances: (MMC 501.3.1) i. For all environmental air exhaust: 3 feet from property lines; 3 feet from operable openings into buildings, and 10 feet from mechanical air intakes. 4. Ducts shall be supported at intervals not to exceed 12 feet. Flexible and other factory -made ducts shall be supported in accordance with the manufacturer's instructions. (MMC 603.10) Plumbing Code Items: 1. Fixtures shall be set level and in proper alignment with the reference to adjacent walls. No water closet or bidet shall be set closer than 15 inches from its center to a side wall or obstruction nor closer than 30 inches center to center to a similar fixture. The clear space in front of a water closet or bidet shall not be less than 24 inches. (MPC 402.5) 2. Water closets shall have an average consumption not to exceed 1.6 gallons of water per flush. (MPC 403.2) 3. Shower heads shall have a maximum flow rate of not more than 2.5 gpm at 80 psi. (MPC 408.2) 4. Shower and tub -shower controls shall be of the pressure balance, thermostatic, or combination pressure balance/thermostatic mixing type that provides scald and thermal shock protection in accordance with ASSE 1016 or ASME A112.18.1/CSA B125.1. Handle valves shall be adjusted to deliver a maximum mixed water temperature of 120°F. (MPC 408.3) 5. Shower compartments, regardless of shape, shall have a minimum finished interior of 1024 square inches and shall also be capable of encompassing a 30 inch circle. (MPC 408.6) If you have any questions or concerns regarding this plan review please contact me via telephone at 952-442-7520 or email at codereview(a)_mnspect.com. Regards, Nicole Xastern, R.A., NCARB Plan Reviewer MNSPECT, LLC Helping You Comply With The Code 235 First St. W. Waconia, MN 55367 O: 952-442-7520 F: 952-442-7521 www.mnsi)ect.com Thank you for your Payment! Transaction ID: 11769 Transaction Number: Transaction Type: Payment Recipient: Contractor Notes: Fees (4) 1LIIYUt P R I 1\1 cj 'f'\ R 'K City of Spring Park 4349 Warren Avenue SP MN, 55384 Ph: 952- 42-7520 $1,334.06 Date: 3/15/2021 Method: Check: 051 Address: 4750 WEST ARM ROAD, SP, MN 55384 Reference: Permit Number: SP-2021-00011 Type: BLDG - Remodel, Small Residential for Massey Berg, LLC State Surcharge Paid 1.00 $23.50 Plan Review Fee Paid 1.00 $514.31 License Lookup Paid 1.00 $5.00 —Permit Fee Paid 1.00 $791.25 $23.50 $514.31 $5.00 $791.25 Total Amount: $1,334.06 Page 1 of 1 Printed on: 3/15/2021 Read all attached materials. Everyone performing work to which the code is applicable shall comply with the code. The field copy of these plans must be kept on -site and made available to inspector during all inspections. To schedule inspections call (952) 442-7520 Please have the permit number and street address ready at the time of the call. Electrical All electrical must be approved by State Electrical Inspector. For electrical permit inquiries please contact the Department of Labor & Industry WWW.ELECTRICITY.STATE.MN.US (651) 284-5064 A minimum of R-3 insulation shall be applied to hot water pipe in accordance with the following; * Piping larger than 3/4" nominal diameter. Piping from the hot water heater to kitchen outlets. * Piping located outside of conditioned space. * Piping from the hot water heater to a distribution manifold. * Piping under a floor slab and any buried piping. * Supply and return piping in hot water circulation systems. * Piping exceeding the maximum lengths given in table R403.4.2. The maximum hot water temperature at Bathtubs and Whirlpool tub fillers not to exceed 120 degrees Fahrenheit, installation of limiting device meeting ASSE 1070 or CSA B125.3 is required. Anti -scald and thermal shock protection device required at shower and tub -shower control valves meeting ASSE 1016 or ASME A112.18/CSA B125.1. Hand -Held showers require back -flow prevention. Internal back -flow prevention devices to comply with ASME A112.18.1/CSA B125.1 or have an external back -flow prevention device complying with ASME All 2.18.3 installed at final inspection. Existing ceiling, wall, or floor cavities exposed during construction are required to be filled with insulation. Hardwired and interconnected smoke alarms are required in the following locations: •1 (one) in every bedroom •1 (one) in the area outside every bedroom -At least 1 (one) per floor where no bedrooms exist including basements and habitable attics Existing spaces where no electrical work has taken place may have battery operated smoke alarms that are not interconnected. 1 (one) Carbon Monoxide (CO) alarm is required outside of and within 10-feet of every bedroom or sleeping area. A CO alarm is required on every level that contains a bedroom or sleeping area. CO alarms may be hardwired, plugged into an outlet or battery operated. All required alarms must be installed and operational at time of final building inspection. Reviewed for Code Compliance This review is limited to the submitted scope of work, is based upon the supposition that the plan accurately depicts the intended construction and end -use, that the necessary legal authority has been obtained to construct the project and work is subject to code compliance and field inspection during construction. By: nkasfern Type of Construction: Remodel Date: 2/24/2021 Occupancy Classification: IRC-1 Permit #: SP-2021-00011 Code Edition: 2020 MRC Separate Permits Required For: ,T Electrical /T Mechanical Plumbing Fireplace Demolition Fire Suppression System Septic Existing condition from permit SP-2021-00005 24" clear in front of toilet required. Center of toilet must be 15" away on from a wall or obstruction on both sides. MN Plumbing Code 4714 New and Existing windows required to have safety glazing 2q' — 6-2 1 /2" 4'-T 10'-9 1 /2" T— — — — — — — — — — — — — — — — —1 I � 5'-11" I i 10--0 1 /2" e L 0 206 I O I I CO MqK n I MOK Bathroom bN MOK Ventilation Required cv I 11'-5" I q'-3 3/4" I I I I I I I I I � I I I I—F-1 -4-- ------------------L--------------- T-q 1/4" T-2 3/4" 12-2" 2q'-2" LIVING AREA 618 SG FT Minimum ceiling height for alterations to existing bathrooms shall be no less than 6'-4", including beams, girders, ducts, or other obstruction. Fire rating must be maintained between units. All penetrations and repairs must be fire caulked, patched, or corrected. Double walls between townhouses shall be separated by (2) 1-hr fire resistance rated walls. Common walls separating townhouses shall have 2-hr fire resistance rating and without plumbing or mechanical (R302.2.2) Bathroom plumbing fixtures shall be installed in accordance with MN rules, Chpt 4714, MN Plumbing Code Bathtub and shower floors, and walls above bathtubs with installed shower heads and in shower compartments shall be finished with a nonabsorbent surface to a height of 6 feet above the floor. LICENSE/CERTIFICATE/REGISTRATION DETAIL RESIDENTIAL Class Type: BLDG Number: BC750127 CONTRACTOR Application 429150 No: Expire Date: 3/31/2022 Orig Date: 12/31 /2018 Enforcement NO Action: Workplace N/A Experience: Status: ISSUED Effect 4/1 /2020 Date: Print 4/20/2020 Date: Name: MASSEY BERG LLC Address: 4119 30TH AVE S MINNEAPOLIS , MN 55406 Phone: 763-670-9445 Business Relationship Requirements Name: MASSEY, QB749842 iView DAVID G Lic/Reg No: license/registration] Status: EXPIRED Application 429582 No: Expire 12/18/2020 Effect 12/18/2018 Date: Date: Orig 12/18/2018 Date: Another Lookup?